http://www.bikeeffects.com/ Your Store description http://www.bikeeffects.com/proddetail.asp?prod=PP-06G http://www.bikeeffects.com/proddetail.asp?prod=PP-06G http://www.bikeeffects.com/prodimages/pp-06s.jpg Open face helmet set with 3.5mm jack socket (no speakers) for use with the Goldwing intercom system. http://www.bikeeffects.com/proddetail.asp?prod=113-13296 http://www.bikeeffects.com/proddetail.asp?prod=113-13296 http://www.bikeeffects.com/prodimages/small/113-13296-1.jpg http://www.bikeeffects.com/proddetail.asp?prod=PHO-31 http://www.bikeeffects.com/proddetail.asp?prod=PHO-31 Telephone Cord for Blackberry http://www.bikeeffects.com/proddetail.asp?prod=AMI0015SSS http://www.bikeeffects.com/proddetail.asp?prod=AMI0015SSS http://www.bikeeffects.com/prodimages/AMI0015SSSs.jpg 0.015" Shim Set for Base Plates I, II, III and Garmin 2610 Housing to adapt to BMW crossbars. Retail price $10.00 http://www.bikeeffects.com/proddetail.asp?prod=PAC-029 http://www.bikeeffects.com/proddetail.asp?prod=PAC-029 http://www.bikeeffects.com/prodimages/pac-029s.jpg Connects any two devices that have a cigarette type plug to a Powerlet socket (BMW type), including cell phones, radar detectors, air compressors, etc. 8" & 10" staggered length. http://www.bikeeffects.com/proddetail.asp?prod=BR-FK http://www.bikeeffects.com/proddetail.asp?prod=BR-FK 12 Volt DC bike power adapter for Kenwood TK-3130 radios. Eliminates the need for batteries and charger. http://www.bikeeffects.com/proddetail.asp?prod=BR-MOT http://www.bikeeffects.com/proddetail.asp?prod=BR-MOT 12 Volt DC bike power adapter for Motorolaradios. Eliminates the need for batteries and charger. http://www.bikeeffects.com/proddetail.asp?prod=98-R1-02 http://www.bikeeffects.com/proddetail.asp?prod=98-R1-02 http://www.bikeeffects.com/prodimages/98-R1-02s.jpg Jeff Atchison's 1998 R1. Custom paint by Robert Dussault. Equiped with a Dussault Undertail, Flushmounts, White Tach face, Frame Sliders, Micron Slip-on exhaust. Engine is stock except for Ivans needles. Front forks by Lindeman Engineering. Rear shock by Penske. http://www.bikeeffects.com/proddetail.asp?prod=98-R1-01 http://www.bikeeffects.com/proddetail.asp?prod=98-R1-01 http://www.bikeeffects.com/prodimages/98-R1-01s.jpg Jeff Atchison's 1998 R1. Custom paint by Robert Dussault. Equiped with a Dussault Undertail, Flushmounts, White Tach face, Frame Sliders, Micron Slip-on exhaust. Engine is stock except for Ivans needles. Front forks by Lindeman Engineering. Rear shock by Penske. http://www.bikeeffects.com/proddetail.asp?prod=2002-2003_Yamaha_R1_Mini-Tail http://www.bikeeffects.com/proddetail.asp?prod=2002-2003_Yamaha_R1_Mini-Tail http://www.bikeeffects.com/prodimages/r1_02-03_tail_onlys.jpg Mini-Tail does not include upper rear cowling. Price is for Mini-Tail only. http://www.bikeeffects.com/proddetail.asp?prod=EXT-01 http://www.bikeeffects.com/proddetail.asp?prod=EXT-01 http://www.bikeeffects.com/prodimages/ext-01s.jpg The EXT-01 3.5mm jack extension cable is 5ft long that can be used to extend either the phone or music lead to the bike mounted bracket for easy quick connection. http://www.bikeeffects.com/proddetail.asp?prod=ADA-03 http://www.bikeeffects.com/proddetail.asp?prod=ADA-03 Starcom input splitter. This is a cable type splitter (doubler) that can be used in areas which do not have enough room for the ADA-01, Moulded Splitter. It allows the connection of 2 audio devices to a single Starcom audio input. http://www.bikeeffects.com/proddetail.asp?prod=PHO-32 http://www.bikeeffects.com/proddetail.asp?prod=PHO-32 4 Pole telephone cord for new generation Smart Phones. Has Stereo capability. http://www.bikeeffects.com/proddetail.asp?prod=08-0211 http://www.bikeeffects.com/proddetail.asp?prod=08-0211 http://www.bikeeffects.com/prodimages/08-0211s.jpg This unit adapts the CarbMate electronic vacuum meter to 3 & 4 cylinder engines. http://www.bikeeffects.com/proddetail.asp?prod=08-0168 http://www.bikeeffects.com/proddetail.asp?prod=08-0168 http://www.bikeeffects.com/prodimages/small/08-0168-1.jpg High quality hose adapters for use with vacuum synchronization tools http://www.bikeeffects.com/proddetail.asp?prod=119711 http://www.bikeeffects.com/proddetail.asp?prod=119711 http://www.bikeeffects.com/prodimages/small/119711-1.jpg These angled valve stems (actual angle is 83º) are machined from one piece of aluminum and come in Silver, Black or Blue. These same valve stems are used by some AMA Superbike race teams for their ease of use and reliability and are factory equipment on Ducati, Aprilia & MV Agusta. ● Fixed to the rim with lock nut ● Solves the problem of access for inflation and checking of air pressure ● Does not need to be replaced with each tire change These valves are for rims with 8.3mm holes and fit most Italian OEM, Marchesini, Marvic, OZ, and BST wheels. Pkg of 2 NOTE: Free USPS Priority Mail shipping to US customers and reduced Flat Rate shipping for other countries. Choose your destination country below. http://www.bikeeffects.com/proddetail.asp?prod=119701 http://www.bikeeffects.com/proddetail.asp?prod=119701 http://www.bikeeffects.com/prodimages/all_valvess.jpg These angled valve stems (actual angle is 83º) are machined from one piece of aluminum and come in Silver, Black, Blue, Red & Gold. These same valve stems are used by some AMA Superbike race teams for their ease of use and reliability. ● Fixed to the rim with lock nut ● Solves the problem of access for inflation and checking of air pressure ● Does not need to be replaced with each tire change These valves are for rims with 11.3mm holes, standard for Japanese motorcycles. Pkg of 2 NOTE: Free USPS First Class Mail shipping to US customers and reduced Flat Rate shipping for other countries. Choose your destination country below. http://www.bikeeffects.com/proddetail.asp?prod=3-62020 http://www.bikeeffects.com/proddetail.asp?prod=3-62020 http://www.bikeeffects.com/prodimages/small/3-62020-1.jpg 2.0" Extension shaft for Techmount Top Plates. Choice of 3 colors. http://www.bikeeffects.com/proddetail.asp?prod=3-62030 http://www.bikeeffects.com/proddetail.asp?prod=3-62030 http://www.bikeeffects.com/prodimages/small/3-62030-1.jpg 3.0" Extension Shaft for Techmount Top Plates. Chose from 3 colors. http://www.bikeeffects.com/proddetail.asp?prod=GH-000 http://www.bikeeffects.com/proddetail.asp?prod=GH-000 http://www.bikeeffects.com/prodimages/small/GH-000-1.jpg Adapter Cable for late model Goldwing helmet sets. http://www.bikeeffects.com/proddetail.asp?prod=TM032 http://www.bikeeffects.com/proddetail.asp?prod=TM032 http://www.bikeeffects.com/prodimages/small/TM032-1.jpg Converts (4) holes AMPs to Dual T pin. Allows Dual T mounting accessories to be mounted onto TechMount top plates. http://www.bikeeffects.com/proddetail.asp?prod=HR1230 http://www.bikeeffects.com/proddetail.asp?prod=HR1230 http://www.bikeeffects.com/prodimages/hr1230s.jpg Adjustable cradle for mounting small cell-phone or Ipod ( Nano, Mini or standard). Maximum width of device not to exceed 3.5". This kit may be mounted directly to any standard top plate or to the P/N 60003 Quick Change Adapter. Available in black only. http://www.bikeeffects.com/proddetail.asp?prod=HR2531 http://www.bikeeffects.com/proddetail.asp?prod=HR2531 http://www.bikeeffects.com/prodimages/hr2531s.jpg Adjustable cradle for mounting PDA, large cell phone or Video Ipod . This kit may be mounted directly to 60003 Quick Change Adapter, 60991 or 60992. Available in black only. Shown with iPaq. Does not come with iPaq. http://www.bikeeffects.com/proddetail.asp?prod=UFST02 http://www.bikeeffects.com/proddetail.asp?prod=UFST02 http://www.bikeeffects.com/prodimages/small/UFST02-1.jpg Newly designed front fork stand with adjustable width and height. Madefrom the same 1.25″ diameter tubing as all of the Steel Horse rearstands. This stand will lift a wide variety of bikes with either narrowforks ( like a Ninja 250 ) or wide forks ( like a CBR 1000RR ). Thesliding heads are made from 1/2″ thick steel plate and are adjustablefrom 7 3/8″ to 8 5/8″. The head guides are the same pieces as used onthe URRS04 and URRS05 rear stands. Made from solid steel and milled intoshape then welded on and finished off with a nice high gloss blackpowder coating. 4 wheel design for superior stability Back braced for strength and sturdiness Cable lockable looped handle High gloss black Powder Coating Will work with un-equal length forks Works with bikes with ABS sensors   Flat rate shipping to the lower 48 states. Choose Pick Up or Flat Rate Shipping below. http://www.bikeeffects.com/proddetail.asp?prod=6104-00-CON http://www.bikeeffects.com/proddetail.asp?prod=6104-00-CON http://www.bikeeffects.com/prodimages/6104-00-cons.jpg This turn signal relay cures rapid flash rate problems when installing LED turn signals. This unit is Plug and Play on the following bikes:Yamaha: YZF-R1, YZF-R6, YZF600, FZ-1, FJR1300 Honda: CBR1000RR, RC-51, CBR600F4i, CB919, ST1300,  GL1500, CBR1100XX, CBR900RR, CBR929RR, CBR600F2, CBR600F3, CBR600F4, VTR1000R Super Hawk, VT600,  02-04 1800 C, 02-03 1800 R models, 02-03 1800 S models, 04-05 1300 C models, 03-05 1300 S models, 05 1300 R modelsKawasaki: ZX-10R, ZX-12R, ZX-6R(R), Z-1000, ZXR1200(1100), ZZR1200, ZX1200, ZR-7 Suzuki: All late model GSX-R's will work by performing a quick splicing of wires using the included instructions and diagramNOTE: This flasher will work on any other bike not listed above that has a standard 2 or 3 prong flasher relay.MSRP $60.00  http://www.bikeeffects.com/proddetail.asp?prod=PAC-009-24 http://www.bikeeffects.com/proddetail.asp?prod=PAC-009-24 http://www.bikeeffects.com/prodimages/pac009s.jpg Connect your Aerostich or older Gerbings vest (2-pin SAE connector type) to our Powerlet deluxe plug. Great replacement cord. http://www.bikeeffects.com/proddetail.asp?prod=FK003D031B http://www.bikeeffects.com/proddetail.asp?prod=FK003D031B http://www.bikeeffects.com/prodimages/FK003D031Bs.jpg These banjo bolts feature a bleeder valve on the banjo bolt to assist in bleeding the brake system. For double line systems. Silver color only. http://www.bikeeffects.com/proddetail.asp?prod=FK003D031A http://www.bikeeffects.com/proddetail.asp?prod=FK003D031A http://www.bikeeffects.com/prodimages/FK003D031As.jpg These banjo bolts feature a bleeder valve on the banjo bolt to assist in bleeding the brake system. For double line systems. Silver color only. http://www.bikeeffects.com/proddetail.asp?prod=FK003D030B http://www.bikeeffects.com/proddetail.asp?prod=FK003D030B http://www.bikeeffects.com/prodimages/FK003D030Bs.jpg These banjo bolts feature a bleeder valve on the banjo bolt to assist in bleeding the brake system. For single line system. Silver color only. http://www.bikeeffects.com/proddetail.asp?prod=FK003D030A http://www.bikeeffects.com/proddetail.asp?prod=FK003D030A http://www.bikeeffects.com/prodimages/FK003D030As.jpg These banjo bolts feature a bleeder valve on the banjo bolt to assist in bleeding the brake system. For single line system. Silver color only. http://www.bikeeffects.com/proddetail.asp?prod=KRA-17M http://www.bikeeffects.com/proddetail.asp?prod=KRA-17M http://www.bikeeffects.com/prodimages/kra-17ms.jpg Low profile antenna for TK-3101K2. This antenna is 3 1/8" long. http://www.bikeeffects.com/proddetail.asp?prod=SWT-01 http://www.bikeeffects.com/proddetail.asp?prod=SWT-01 http://www.bikeeffects.com/prodimages/swt-01s.jpg The SWT-01 Audio Source Selector is designed to be used with the MUS-03 Car Stereo Cable & Fitting Kit. It allows the rider to select from on board speakers (if the bike is equipped with them) and the Starcom Communication system. It has a 3 position selector: Speakers onlySpeakers & Starcom helmet setStarcom helmet set only  http://www.bikeeffects.com/proddetail.asp?prod=1500120 http://www.bikeeffects.com/proddetail.asp?prod=1500120 http://www.bikeeffects.com/prodimages/1500120s.jpg Bar End Weight, made from CNC machined aluminum billet. Screws included. Sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=1500180 http://www.bikeeffects.com/proddetail.asp?prod=1500180 http://www.bikeeffects.com/prodimages/1500180s.jpg Bar End Weight, made from CNC machined aluminum billet. Screws included. Sold in pairs. Click Here to view or print the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=1500360 http://www.bikeeffects.com/proddetail.asp?prod=1500360 http://www.bikeeffects.com/prodimages/1500360s.jpg Bar End Weight, made from CNC machined aluminum billet. Screws included. Sold in pairs. Click Here to view or print the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=Perkins-T-Rex http://www.bikeeffects.com/proddetail.asp?prod=Perkins-T-Rex http://www.bikeeffects.com/prodimages/small/Perkins-T-Rex-1.jpg Barry Perkins' Starcom Digital equiped T-Rex http://www.bikeeffects.com/proddetail.asp?prod=ABP00001-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABP00001-0000 http://www.bikeeffects.com/prodimages/ABP00001-0000s.jpg This base plate is designed to accommodate the Garmin "Dashboard Mount" (Black elliptical locking mechanism) Garmin Part Number 010-10199-02. It can be used for GPS and Radar detectors. Retail price $69.00 http://www.bikeeffects.com/proddetail.asp?prod=ABP00001-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABP00001-0101 http://www.bikeeffects.com/prodimages/ABP00001-0101s.jpg This base plate is designed to accommodate the Garmin "Dashboard Mount" (Black elliptical locking mechanism) Garmin Part Number 010-10199-02. It can be used for GPS and Radar detectors. Retail price $75.00 http://www.bikeeffects.com/proddetail.asp?prod=ABP00002-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABP00002-0000 http://www.bikeeffects.com/prodimages/ABP00002-0000s.jpg This mount is made specifically for the mounting of Garmin GPS models StreetPilot III, StreetPilot 2600 series, GPSMap 176/276/296 and GPS II, III, & V models. Use the following Garmin Part Numbers for mounting Street Pilot III - Garmin #010-10304-00 (Comes with GPS) GPSMAP176/176C - Garmin #010-10257-00 (Comes with GPS) Street Pilot 2600 Series - Garmin #010-10495-00 (Purchased separately) Quest - Garmin #010-10610-00 (Purchased separately) Retail price $75.00 http://www.bikeeffects.com/proddetail.asp?prod=ABP00002-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABP00002-0101 http://www.bikeeffects.com/prodimages/ABP00002-0101s.jpg This mount is made specifically for the mounting of Garmin GPS models StreetPilot III, StreetPilot 2600 series, GPSMap 176/276/296 and GPS II, III, & V models. Use the following Garmin Part Numbers for mounting Street Pilot III - Garmin #010-10304-00 (Comes with GPS) GPSMAP176/176C - Garmin #010-10257-00 (Comes with GPS) Street Pilot 2600 Series - Garmin #010-10495-00 (Purchased separately) Quest - Garmin #010-10610-00 (Purchased separately) Retail price $80.00 http://www.bikeeffects.com/proddetail.asp?prod=ABP00003-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABP00003-0101 http://www.bikeeffects.com/prodimages/ABP00003-0101s.jpg Retail price $23.00 http://www.bikeeffects.com/proddetail.asp?prod=PPL-001 http://www.bikeeffects.com/proddetail.asp?prod=PPL-001 http://www.bikeeffects.com/prodimages/ppl001s.jpg Good for battery chargers, voltmeters - the stuff you use in the garage. http://www.bikeeffects.com/proddetail.asp?prod=PAC-008-6 http://www.bikeeffects.com/proddetail.asp?prod=PAC-008-6 http://www.bikeeffects.com/prodimages/pac008-6s.jpg Connects a Battery Tender Battery Charger to a Powerlet socket. Can be used on all BMW Triumph and Ducati motorcycles equipped with a factory socket. Approx 6" long. http://www.bikeeffects.com/proddetail.asp?prod=PAC-008-18 http://www.bikeeffects.com/proddetail.asp?prod=PAC-008-18 http://www.bikeeffects.com/prodimages/pac008-6s.jpg Connects a Battery Tender Battery Charger to a Powerlet socket. Can be used on all BMW Triumph and Ducati motorcycles equipped with a factory socket. Approx 18" long. Product picture shows PAC-008-6, with 6" cable. http://www.bikeeffects.com/proddetail.asp?prod=PouchDual http://www.bikeeffects.com/proddetail.asp?prod=PouchDual http://www.bikeeffects.com/prodimages/pouchduals.jpg Belt Pouch for Dual Portable Heat-troller. http://www.bikeeffects.com/proddetail.asp?prod=PouchSingle http://www.bikeeffects.com/proddetail.asp?prod=PouchSingle http://www.bikeeffects.com/prodimages/pouchsingles.jpg Belt Pouch for Single Portable Heat-troller. http://www.bikeeffects.com/proddetail.asp?prod=TEE01 http://www.bikeeffects.com/proddetail.asp?prod=TEE01 http://www.bikeeffects.com/prodimages/ 100% cotton white tee shirt with the Bike Effects logo in red and black. http://www.bikeeffects.com/proddetail.asp?prod=BikeCAM1 http://www.bikeeffects.com/proddetail.asp?prod=BikeCAM1 http://www.bikeeffects.com/prodimages/bikecams.jpg Complete motorcycle video recording system with audio recording capability. Record your favorite ride, your track day or document your motorcycle dream trip. Interfaces with the Starcom communication systems and allows recording audio along with your video while you are riding. Small, low profile camera can be helmet mounted or attached to the motorcycle, either forward or rear looking. Each kit includes the following items: 1 Bullet Camera (Includes Power Cable & Power Pack) Camera suction mount kit Digital Video Recorder (Includes wired remote control) 2GB SD Card (Up to 16GB cards can be used) Click hereto see more information and pictures Click hereto see a short movie recorded on the system    http://www.bikeeffects.com/proddetail.asp?prod=3100110 http://www.bikeeffects.com/proddetail.asp?prod=3100110 http://www.bikeeffects.com/prodimages/3100110s.jpg Black trim for Flushmounts with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=5025 http://www.bikeeffects.com/proddetail.asp?prod=5025 http://www.bikeeffects.com/prodimages/5025s.jpg Blue Sea Systems 6 circuit Blade Fuse Block with Negative BusClear insulating cover with label recesses Cover Satisfies ABYC/USCG requirements for insulationTin-plated copper buses and fuse clips give 30 Amperes rating per circuitAccepts ATO and ATC fast acting blade fuses20 write-on circuit labels includedTin-plated copper buses and fuse clips give 30 Amperes rating per circuitAccepts ATO and ATC fast acting blade fuses http://www.bikeeffects.com/proddetail.asp?prod=3100120 http://www.bikeeffects.com/proddetail.asp?prod=3100120 http://www.bikeeffects.com/prodimages/3100120s.jpg Blue trim for Flushmounts with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=3-21007 http://www.bikeeffects.com/proddetail.asp?prod=3-21007 http://www.bikeeffects.com/prodimages/small/3-21007-1.jpg BMW Control Mount system that mounts onto the handlebar control pinch bolts (clutch or brake side). Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=3-21005 http://www.bikeeffects.com/proddetail.asp?prod=3-21005 http://www.bikeeffects.com/prodimages/small/3-21005-1.jpg Fork Cap Mount systems mount onto the fork tube oil filler bolts foundon many BMW motorcycles. As with all ball/socket systems the shaft canbe rotated to almost any angle and the top plate can be rotated 360degrees as well as off-set left, right and center. Black only. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=SPP-BMW-KFR http://www.bikeeffects.com/proddetail.asp?prod=SPP-BMW-KFR Patented torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, red, blue, white, orange, green, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, green or titanium. Every kit is made as it is ordered, typically same or next day. Lifetime Warranty (Guaranteed for the life of original owner and the original motorcycle) Agenerally unrecognized manufacturer's recommendation is that alloriginal rubber hydraulic hoses should be changed every four years toavoid failure. Spiegler brake lines are maintenance free and willprovide reliable service for the life of your motorcycle. NOTE: If you have bar risers or bar back devices on your motorcycle,please call Bike Effects for pricing on bikes with these modifications. http://www.bikeeffects.com/proddetail.asp?prod=3-21009 http://www.bikeeffects.com/proddetail.asp?prod=3-21009 http://www.bikeeffects.com/prodimages/small/3-21009-1.jpg Specialty Center Mount for K1200GT (2007 and Later) Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=3-21008 http://www.bikeeffects.com/proddetail.asp?prod=3-21008 http://www.bikeeffects.com/prodimages/small/3-21008-1.jpg The BMW RT Center Mount for R1150RT & R1200RT. Fits all years. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=CAB-20 http://www.bikeeffects.com/proddetail.asp?prod=CAB-20 http://www.bikeeffects.com/prodimages/cab-20s.jpg Starcom power lead with a BMW/Powerlet type plug. http://www.bikeeffects.com/proddetail.asp?prod=PRO-FIT1 http://www.bikeeffects.com/proddetail.asp?prod=PRO-FIT1 http://www.bikeeffects.com/prodimages/pro-fit1s.jpg The optional PRO-FIT1 adds a professional factory fit and finish to your Starcom1 installation. It allows the rider and passenger headset cables to plug into a bike mounted bracket. The bracket mount also allows for the phone or music extension connection. Kit Includes: • 1 BKT-01 fitting bracket • 1 EXT-01 3.5mm extension cable • 2 HSEX-04 6ft Bulkhead extension lead http://www.bikeeffects.com/proddetail.asp?prod=BKT-01 http://www.bikeeffects.com/proddetail.asp?prod=BKT-01 http://www.bikeeffects.com/prodimages/bkt-01s.jpg The BKT-01 mounting bracket allows the HSEX-04 and/or the HSEX-05 bulkhead headset cables to be fixed to the bike frame in a suitable position, without the requirement of cutting a mount hole. http://www.bikeeffects.com/proddetail.asp?prod=SH-550S http://www.bikeeffects.com/proddetail.asp?prod=SH-550S Coiled cable with 2 male plugs for the zumo™ on one end and one female plug on the other to attach to a Starcom helmet set. http://www.bikeeffects.com/proddetail.asp?prod=CAB-10 http://www.bikeeffects.com/proddetail.asp?prod=CAB-10 Cable for single pin Uniden radios. http://www.bikeeffects.com/proddetail.asp?prod=CAB-01 http://www.bikeeffects.com/proddetail.asp?prod=CAB-01 http://www.bikeeffects.com/prodimages/cab-01s.jpg Cable to connect Kenwood TK3101,TK3201 or FunKey446 to StarCom. Click Here to view the latest list of compatible radio models and cables. http://www.bikeeffects.com/proddetail.asp?prod=CAB-04 http://www.bikeeffects.com/proddetail.asp?prod=CAB-04 http://www.bikeeffects.com/prodimages/cab-04s.jpg Cable to connect Starcom to Motorola & Cobra single pin two-way radios (single pin). Click Here to view the latest list of compatible radio models and cables. http://www.bikeeffects.com/proddetail.asp?prod=CAB-14 http://www.bikeeffects.com/proddetail.asp?prod=CAB-14 Cable to connect Motorola 2 pin radios to Starcom. Click Here to view the latest list of compatible radio models and cables. http://www.bikeeffects.com/proddetail.asp?prod=CAB-02 http://www.bikeeffects.com/proddetail.asp?prod=CAB-02 http://www.bikeeffects.com/prodimages/cab-02s.jpg Cable, Starcom to TS700, XT5000, Cobra and Midland (two pin) Two-Way Radios. Click Here to view the latest list of compatible radio models and cables. http://www.bikeeffects.com/proddetail.asp?prod=CAB-12 http://www.bikeeffects.com/proddetail.asp?prod=CAB-12 Cable, Starcom to Yaesu VX7. Special order item. Not stocked. http://www.bikeeffects.com/proddetail.asp?prod=MUS-03 http://www.bikeeffects.com/proddetail.asp?prod=MUS-03 http://www.bikeeffects.com/prodimages/ This allows a connection from a pre-installed audio or speaker system to a Starcom audio input. Comes as a kit with instructions. http://www.bikeeffects.com/proddetail.asp?prod=08-0323 http://www.bikeeffects.com/proddetail.asp?prod=08-0323 http://www.bikeeffects.com/prodimages/08-0323s.jpg The CarbMate is an electronic two channel vacuum meter designed specifically for synchronization of carbureted or fuel injected multi-cylinder engines. • Mercury free design • Sync status is indicated by a series of LED's. The center LED will light when equalization has been achieved • Accurate within 0.5 cm/hg true resolution • Dual channel design can sync 3 & 4 cylinder engines with optional 4 channel adapter • 12 volt external power required Retail price $136.50 http://www.bikeeffects.com/proddetail.asp?prod=3100170 http://www.bikeeffects.com/proddetail.asp?prod=3100170 http://www.bikeeffects.com/prodimages/3100170s.jpg Carbon trim for Flushmounts with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=1100xx_2 http://www.bikeeffects.com/proddetail.asp?prod=1100xx_2 http://www.bikeeffects.com/prodimages/1100xx-2s.jpg Just re-designed for 2004 by Robert Dussault, this is the latest Undertail for the CBR1100XX Blackbird. http://www.bikeeffects.com/proddetail.asp?prod=1100xx_1 http://www.bikeeffects.com/proddetail.asp?prod=1100xx_1 http://www.bikeeffects.com/prodimages/1100xx-1s.jpg Just re-designed for 2004 by Robert Dussault, this is the latest Undertail for the CBR1100XX Blackbird. http://www.bikeeffects.com/proddetail.asp?prod=CBR954-03 http://www.bikeeffects.com/proddetail.asp?prod=CBR954-03 http://www.bikeeffects.com/prodimages/954-03s.jpg New Mototeck Undertail for Honda CBR954, Designed by Dussault. http://www.bikeeffects.com/proddetail.asp?prod=CBR954-02 http://www.bikeeffects.com/proddetail.asp?prod=CBR954-02 http://www.bikeeffects.com/prodimages/954-02s.jpg New Mototeck Undertail for Honda CBR954, Designed by Dussault. http://www.bikeeffects.com/proddetail.asp?prod=CBR954-01 http://www.bikeeffects.com/proddetail.asp?prod=CBR954-01 http://www.bikeeffects.com/prodimages/954-01s.jpg New Mototeck Undertail for Honda CBR954, Designed by Dussault. http://www.bikeeffects.com/proddetail.asp?prod=AP-1 http://www.bikeeffects.com/proddetail.asp?prod=AP-1 http://www.bikeeffects.com/prodimages/ap-1s.jpg The AP-1's compact size (3.0" X 2.4") allows for easy installation. Once mounted, a positive and negative wire is run to the Power Panel which will then supply convenient, safe fused power for up to eight electronic devices. Capacity up to 60 Amps Plated contacts, stainless steel hardware ATC Type Fuses (included) Lugless connector clamps Instructions and hardware included Optional AP-170R Relay & Wiring Kit available One year warranty http://www.bikeeffects.com/proddetail.asp?prod=AP-130BE http://www.bikeeffects.com/proddetail.asp?prod=AP-130BE http://www.bikeeffects.com/prodimages/ap-130rs.jpg The AP-130BE Power Relay Kit is offered to simplify the installation of the AP-2 Power Panel. This relay is operated whenever you have the bike running by using a small amount of power from the stock wiring harness to trigger the relay. The relay contacts take power directly from the battery and apply it to the "switched" portion on the fuse panel. Additionally, "ground" and "constant battery" wiring is provided. NOTE: This kit has 18" of extra battery wire for the relay to accommodate the Yamaha FJR1300 with the battery in the front fairing of the motorcycle. http://www.bikeeffects.com/proddetail.asp?prod=AP-130R http://www.bikeeffects.com/proddetail.asp?prod=AP-130R http://www.bikeeffects.com/prodimages/ap-130rs.jpg The AP-130R Power Relay Kit is offered to simplify the installation of the AP-2 Power Panel. This relay is operated whenever you have the bike running by using a small amount of power from the stock wiring harness to trigger the relay. The relay contacts take power directly from the battery and apply it to the "switched" portion on the fuse panel. Additionally, "ground" and "constant battery" wiring is provided. http://www.bikeeffects.com/proddetail.asp?prod=AP-170R http://www.bikeeffects.com/proddetail.asp?prod=AP-170R http://www.bikeeffects.com/prodimages/ap-170rs.jpg The AP-170R Power Relay Kit is offered to allow the AP-1 Power Panel to provide "switched" power. This relay is operated whenever you have the bike running by using a small amount of power from the stock wiring harness to trigger the relay. The relay contacts take power directly from the battery and apply it to the AP-1 Power Panel or other fuse blocks. http://www.bikeeffects.com/proddetail.asp?prod=AP-170BE http://www.bikeeffects.com/proddetail.asp?prod=AP-170BE http://www.bikeeffects.com/prodimages/ap-170rs.jpg The AP-170BE Power Relay Kit is offered to allow the AP-1 Power Panel to provide "switched" power. This relay is operated whenever you have the bike running by using a small amount of power from the stock wiring harness to trigger the relay. The relay contacts take power directly from the battery and apply it to the AP-1 Power Panel or other fuse blocks. NOTE: This kit has 18" of extra battery wire for the relay to accommodate the Yamaha FJR1300 with the battery in the front fairing of the motorcycle. http://www.bikeeffects.com/proddetail.asp?prod=AP-2 http://www.bikeeffects.com/proddetail.asp?prod=AP-2 http://www.bikeeffects.com/prodimages/ap-2s.jpg The AP-2 Power Panel provides both constant and switched power sources. Devices such as GPS and radio memory which need to be "kept alive", even when the bike is off have their own "constant power" fuses with three outputs fed by two fuses. These outputs can supply approximately 20 Amps but are normally fused at minimum to protect the small wires which feed these devices.Switched, high powered devices are fed power through the additional fuses with five outputs. These fuses can be controlled by an optional AP-130R Relay and Wiring Kit.  Capacity up to 50 Amps (20 constant, 30 fused) Plated contacts, stainless steel hardwareATC Type Fuses (included)Lugless connector clampsInstructions and hardware includedOptional AP-130R Relay & Wiring Kit availableOne year warranty http://www.bikeeffects.com/proddetail.asp?prod=3-81009 http://www.bikeeffects.com/proddetail.asp?prod=3-81009 http://www.bikeeffects.com/prodimages/small/3-81009-1.jpg Center Mount for Kawasaki Concourse 14. Mounting Garmin ZUMO 660 requires P/N 60007 ZUMO Top Plate! Top: 2.25", round (with 4 hole AMPS pattern Shaft Lenght: 1.75" Shaft Style: Pivot Height: 3.0" (1.0" from stem nut) Colors: Titanium or Silver Click here for more information about the Centermounts. http://www.bikeeffects.com/proddetail.asp?prod=2000100 http://www.bikeeffects.com/proddetail.asp?prod=2000100 http://www.bikeeffects.com/prodimages/2000100s.jpg Chain guard made of Stainless Steel. Screws included. http://www.bikeeffects.com/proddetail.asp?prod=2000110 http://www.bikeeffects.com/proddetail.asp?prod=2000110 http://www.bikeeffects.com/prodimages/2000110s.jpg Chain guard made of Stainless Steel. Screws included. http://www.bikeeffects.com/proddetail.asp?prod=2000120 http://www.bikeeffects.com/proddetail.asp?prod=2000120 http://www.bikeeffects.com/prodimages/2000120s.jpg Chain guard made of Stainless Steel. Screws included. http://www.bikeeffects.com/proddetail.asp?prod=2000180 http://www.bikeeffects.com/proddetail.asp?prod=2000180 http://www.bikeeffects.com/prodimages/2000180s.jpg Chain guard made of Stainless Steel. Screws included. http://www.bikeeffects.com/proddetail.asp?prod=2000170 http://www.bikeeffects.com/proddetail.asp?prod=2000170 http://www.bikeeffects.com/prodimages/2000170s.jpg Chain guard made of Stainless Steel. Screws included. http://www.bikeeffects.com/proddetail.asp?prod=3100190 http://www.bikeeffects.com/proddetail.asp?prod=3100190 http://www.bikeeffects.com/prodimages/3100190s.jpg Chrome trim for Flushmounts with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=PAC-001 http://www.bikeeffects.com/proddetail.asp?prod=PAC-001 http://www.bikeeffects.com/prodimages/pac001s.jpg "Stubby" connects any device that has a cigarette type plug to a Powerlet socket (BMW type), including cell phones, radar detectors, air compressors, etc. http://www.bikeeffects.com/proddetail.asp?prod=PAC-002 http://www.bikeeffects.com/proddetail.asp?prod=PAC-002 http://www.bikeeffects.com/prodimages/pac002s.jpg Connects any device that has a cigarette type plug to a Powerlet socket (BMW type), including cell phones, radar detectors, air compressors, etc. Approx 10" long. http://www.bikeeffects.com/proddetail.asp?prod=08-0253A http://www.bikeeffects.com/proddetail.asp?prod=08-0253A http://www.bikeeffects.com/prodimages/08-0253As.jpg Cigar lighter adapter cable for OptiMate III charger. Works with power outlets on BMW and Triumph, as well as Powerlet™ sockets. Retail price $18.90 http://www.bikeeffects.com/proddetail.asp?prod=PMI-003 http://www.bikeeffects.com/proddetail.asp?prod=PMI-003 http://www.bikeeffects.com/prodimages/small/PMI-003-1.jpg Cigarette Socket Cover. Black only. http://www.bikeeffects.com/proddetail.asp?prod=2005000 http://www.bikeeffects.com/proddetail.asp?prod=2005000 http://www.bikeeffects.com/prodimages/2005000s.jpg Clutch slave support made of CNC machined aluminum.Screws included. http://www.bikeeffects.com/proddetail.asp?prod=CAB-21 http://www.bikeeffects.com/proddetail.asp?prod=CAB-21 Starcom radio cable for Cobra and Midland CB radios. Has built in Ferrite as well as a resister to reduce Microphone gain. This cable is designed for Midland 75-822 & Cobra 38WXST radios. http://www.bikeeffects.com/proddetail.asp?prod=LI-7200 http://www.bikeeffects.com/proddetail.asp?prod=LI-7200 http://www.bikeeffects.com/prodimages/li-7200s.jpg This ultra-compact GMRS/FRS two-way radio value pack offers radios with a range up to 27 miles and offer the maximum transmitter power output allowed by FCC regulations. The batteries are the highest output in the industry. Two port desktop chargerHigh capacity (1500mAh) Lithium Ion batteries10 Channel NOAA All Hazards RadioValue Pack includes 2 radios http://www.bikeeffects.com/proddetail.asp?prod=3-31001 http://www.bikeeffects.com/proddetail.asp?prod=3-31001 http://www.bikeeffects.com/prodimages/small/3-31001-1.jpg Fits wide range of metric and all Harley-Davidson motorcycles.ControlMount: attaches to handlebar control clamps(clutch or brake side).Replaces the two factory pinch bolts with new stainless bolts andspacers on handlebar controls. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=FK002D010B-5 http://www.bikeeffects.com/proddetail.asp?prod=FK002D010B-5 http://www.bikeeffects.com/prodimages/FK002D010Bs.jpg Copper crush washers for brake system banjo bolts. Pkg of 5. http://www.bikeeffects.com/proddetail.asp?prod=SH-010 http://www.bikeeffects.com/proddetail.asp?prod=SH-010 http://www.bikeeffects.com/prodimages/sh-010s.jpg including Pit Lane Crews, open top cars, trikes etc. It is based on a lightweight ear defender designed for outdoor use and provides 30dB noise protection at 1kHz. The boom is a strong bend and stay construction. Two levels of wind protection are provided. The standard foam will protect the microphone from from moderate wind noise while the secondary foam will give the ultimate for high noise applications.Headsets are sold separately and are a special order item. http://www.bikeeffects.com/proddetail.asp?prod=RB-516 http://www.bikeeffects.com/proddetail.asp?prod=RB-516 http://www.bikeeffects.com/prodimages/crglevers20s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $119.95 R1 2004-2005 R6 2005 http://www.bikeeffects.com/proddetail.asp?prod=AN-531 http://www.bikeeffects.com/proddetail.asp?prod=AN-531 http://www.bikeeffects.com/prodimages/an531s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $109.95 This lever fits the following models: GSX-R600 GSX-R750 GSX-R1000 01-04 CBR1000RR ZX-600/ZX-636 Through 2004 ZX-10R Z1000 ZX-12R R6 2000-2004 FZ1 2001-2006 This lever fits the following models: R! 1999-2003 FZ1 2001-2004 http://www.bikeeffects.com/proddetail.asp?prod=AN-541 http://www.bikeeffects.com/proddetail.asp?prod=AN-541 http://www.bikeeffects.com/prodimages/an541s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $109.95 This lever fits the following models: GSX-R600 GSX-R750 GSX-R1000 01-04 CBR1000RR ZX-600/ZX-636 ZX-10R Z1000 ZX-12R R6 2000-2004 FZ1 2001-2006 This lever fits the following models: 919 CBR600F4i http://www.bikeeffects.com/proddetail.asp?prod=AN-551 http://www.bikeeffects.com/proddetail.asp?prod=AN-551 http://www.bikeeffects.com/prodimages/an551s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $109.95 This lever fits the following models: CBR600RR CBR929 CBR954 RC51 http://www.bikeeffects.com/proddetail.asp?prod=AN-521 http://www.bikeeffects.com/proddetail.asp?prod=AN-521 http://www.bikeeffects.com/prodimages/an521s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $109.95 This lever fits the following models: GSX-R600 GSX-R750 GSX-R1000 01-04 CBR1000RR ZX-600/ZX-636 ZX-10R Z1000 ZX-12R R6 2000-2004 FZ1 2001-2005 http://www.bikeeffects.com/proddetail.asp?prod=RN-511 http://www.bikeeffects.com/proddetail.asp?prod=RN-511 http://www.bikeeffects.com/prodimages/an521s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $119.95 This lever fits the following models: GSX-R600 04-05 GSX-R750 04-05 GSX-R1000 2005 Kawasaki ZX600/636 2005 Radial Brake http://www.bikeeffects.com/proddetail.asp?prod=RN-521 http://www.bikeeffects.com/proddetail.asp?prod=RN-521 This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $119.95 Fits CBR1000RR 07-08 http://www.bikeeffects.com/proddetail.asp?prod=AB521-B http://www.bikeeffects.com/proddetail.asp?prod=AB521-B http://www.bikeeffects.com/prodimages/crglevers20s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. This lever fits the following models: Mille, Tuono, FalcoMSRP $109.95  http://www.bikeeffects.com/proddetail.asp?prod=AB521-C http://www.bikeeffects.com/proddetail.asp?prod=AB521-C http://www.bikeeffects.com/prodimages/crglevers20s.jpg This lever features the "Roll-A-Click" Lever position system. Designed for OEM master cylinders, it is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. This lever fits the following models: Mille, Tuono, FalcoMSRP $109.95 http://www.bikeeffects.com/proddetail.asp?prod=AN-631 http://www.bikeeffects.com/proddetail.asp?prod=AN-631 http://www.bikeeffects.com/prodimages/an631s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $109.95 Fits the following Models: R1 1999-2006 FZ1 2001-2005 http://www.bikeeffects.com/proddetail.asp?prod=AN-641 http://www.bikeeffects.com/proddetail.asp?prod=AN-641 http://www.bikeeffects.com/prodimages/an641s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $109.95 Fits the following Models: R6FZ1 06-07FZ6 http://www.bikeeffects.com/proddetail.asp?prod=AN-642 http://www.bikeeffects.com/proddetail.asp?prod=AN-642 http://www.bikeeffects.com/prodimages/an642s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $109.95 Fits the following Models: CBR600RR CBR954 http://www.bikeeffects.com/proddetail.asp?prod=AN-651 http://www.bikeeffects.com/proddetail.asp?prod=AN-651 http://www.bikeeffects.com/prodimages/an651s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $109.95 Fits the following Models: CBR1000RR RC51 http://www.bikeeffects.com/proddetail.asp?prod=AN-661 http://www.bikeeffects.com/proddetail.asp?prod=AN-661 http://www.bikeeffects.com/prodimages/an661s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers. MSRP $109.95 Fits the following Models: CBR600F4i CBR929 919 http://www.bikeeffects.com/proddetail.asp?prod=AN-643 http://www.bikeeffects.com/proddetail.asp?prod=AN-643 http://www.bikeeffects.com/prodimages/ This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $109.95 Fits the following Models: GSX-R1000 05-06 http://www.bikeeffects.com/proddetail.asp?prod=AN-611 http://www.bikeeffects.com/proddetail.asp?prod=AN-611 http://www.bikeeffects.com/prodimages/an611s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $109.95Fits the following Models: GSX-R650 GSX-R750 GSX-R1000 http://www.bikeeffects.com/proddetail.asp?prod=AN-681 http://www.bikeeffects.com/proddetail.asp?prod=AN-681 http://www.bikeeffects.com/prodimages/an681s.jpg This lever features the "Roll-A-Click" Lever position system. It is adjustable via a miniature "clicker" lever that controls a roller cam assembly, giving riders the ability to manipulate lever position while riding. Levers are available in a Gold, Grey or Black hard-anodized finish. Comes in Standard length or short. Use short levers only if you plan to use just two fingers.MSRP $109.95 Fits the following Models: ZX-600 ZX-636 ZX-10R Z1000 ZX-12R http://www.bikeeffects.com/proddetail.asp?prod=CustomZX9-R http://www.bikeeffects.com/proddetail.asp?prod=CustomZX9-R http://www.bikeeffects.com/prodimages/zx-9rundertails.jpg Beautiful custom painted ZX9-R with Mototeck Mini-Tail designed by Dussault. http://www.bikeeffects.com/proddetail.asp?prod=SFK-01 http://www.bikeeffects.com/proddetail.asp?prod=SFK-01 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Starcom1 DC power fitting kit. Includes DC power cable. This kit is included in all Starcom1 kits. http://www.bikeeffects.com/proddetail.asp?prod=SCG-01 http://www.bikeeffects.com/proddetail.asp?prod=SCG-01 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg StarCom1 DC power to Cigarette power cable. http://www.bikeeffects.com/proddetail.asp?prod=PPL-002 http://www.bikeeffects.com/proddetail.asp?prod=PPL-002 http://www.bikeeffects.com/prodimages/ppl002s.jpg Good for radar detectors, GPS Units, cell phone adapter cables - the stuff you bring riding. This part is the same as PPL-001 but also includes a cable clamp (strain relief). http://www.bikeeffects.com/proddetail.asp?prod=USA-UPS http://www.bikeeffects.com/proddetail.asp?prod=USA-UPS UPS Shipping charges and handling http://www.bikeeffects.com/proddetail.asp?prod=USPS-1 http://www.bikeeffects.com/proddetail.asp?prod=USPS-1 Domestic USPS Shipping Charges http://www.bikeeffects.com/proddetail.asp?prod=PAC-028 http://www.bikeeffects.com/proddetail.asp?prod=PAC-028 http://www.bikeeffects.com/prodimages/pac028s.jpg Connects any two devices that have a cigarette type plug to a Powerlet socket (BMW type), including cell phones, radar detectors, air compressors, etc. Approx 8" & 10" long leads. http://www.bikeeffects.com/proddetail.asp?prod=DMCOAX http://www.bikeeffects.com/proddetail.asp?prod=DMCOAX http://www.bikeeffects.com/prodimages/dmcoaxs.jpg Technical Specifications Please read: This is not a 2 for 1 deal! This Heat-troller is designed for 1 person to control 2 sections of heated clothing only. Size - 1 in x 2 in x 3 in or 25 mm x 50 mm x 75 mm Switch and LED on PC board on 5ft cord for Panel Mounting .8in L x .9in W x .7in H With Attached 18 inch battery harness with 15 amp fuse Output: Two Coax Connectors. http://www.bikeeffects.com/proddetail.asp?prod=DPCOAX http://www.bikeeffects.com/proddetail.asp?prod=DPCOAX http://www.bikeeffects.com/prodimages/dpcoaxs.jpg Technical Specifications Please read: This is not a 2 for 1 deal! This Heat-troller is designed for 1 person to control 2 sections of heated clothing only. Size - 1 in x 2 in x 3 in or 25 mm x 50 mm x 75 mm Output: Two Coax Connectors. http://www.bikeeffects.com/proddetail.asp?prod=DSMCOAX http://www.bikeeffects.com/proddetail.asp?prod=DSMCOAX http://www.bikeeffects.com/prodimages/dsmcoaxs.jpg Dual Semi-Mounted Heat-troller™ The perfect product for those that don't want toor can't drill holes in their Bike MOUNT A HEAT-TROLLER WITHOUT DRILLING ANYHOLES Technical Specifications: The Semi-Mounted Heat-troller has the same specsas the Mounted Heat-troller except for one important feature. The switches comemounted in a box, 1.5in L x 1.3in W x .9in H, that can be Velcroed on to thefairing or the clutch fluid reservoir. Coax Output connector.Size - 1 in x 2in x 3 in or 25 mm x 50 mm x 75 mm With Attached 18 inch battery harness with 15amp fuse Output: Two Coax Connectors http://www.bikeeffects.com/proddetail.asp?prod=AT-200 http://www.bikeeffects.com/proddetail.asp?prod=AT-200 Dynojet Autotune for all 2009 non Harley Davidson bikes. http://www.bikeeffects.com/proddetail.asp?prod=4-103 http://www.bikeeffects.com/proddetail.asp?prod=4-103 http://www.bikeeffects.com/prodimages/103-4s.jpg Linear Sensor, Pull type. Includes mounting kit. http://www.bikeeffects.com/proddetail.asp?prod=4-104 http://www.bikeeffects.com/proddetail.asp?prod=4-104 http://www.bikeeffects.com/prodimages/104-4.jps Linear Sensor, Push type. Includes mounting kit. http://www.bikeeffects.com/proddetail.asp?prod=4-101 http://www.bikeeffects.com/proddetail.asp?prod=4-101 http://www.bikeeffects.com/prodimages/101-4s.jpg Shift Rod Tension Sensor (Pull Type) m6/m6 threads http://www.bikeeffects.com/proddetail.asp?prod=4-102 http://www.bikeeffects.com/proddetail.asp?prod=4-102 http://www.bikeeffects.com/prodimages/102-4s.jpg Shift Rod Pressure Sensor (Push Type) m6/m6 threads http://www.bikeeffects.com/proddetail.asp?prod=PRO-002 http://www.bikeeffects.com/proddetail.asp?prod=PRO-002 http://www.bikeeffects.com/prodimages/pro-001s.jpg Earplugs with Boom Mic. This is used for riders without a helmet or who use a half helmet. http://www.bikeeffects.com/proddetail.asp?prod=6407175 http://www.bikeeffects.com/proddetail.asp?prod=6407175 http://www.bikeeffects.com/prodimages/6407175s.jpg Electrical Connection Plug Kit. Contains 4 Male and 4 Female Connectors. http://www.bikeeffects.com/proddetail.asp?prod=PPC-004 http://www.bikeeffects.com/proddetail.asp?prod=PPC-004 http://www.bikeeffects.com/prodimages/ppc004s.jpg Works with Escort Radar Detectors. These cables directly connect your detector to a Powerlet socket. 24" length with a right angle Powerlet Plug. http://www.bikeeffects.com/proddetail.asp?prod=70053 http://www.bikeeffects.com/proddetail.asp?prod=70053 http://www.bikeeffects.com/prodimages/70053s.jpg Euro Mount system designed to clamp onto the top of the fork tube on European sport bikes. For 53mm fork tubes. http://www.bikeeffects.com/proddetail.asp?prod=08-0253D http://www.bikeeffects.com/proddetail.asp?prod=08-0253D http://www.bikeeffects.com/prodimages/08-0253Ds.jpg Extension cable for Optimate III charger. This cable extends the charger's reach by 8 feet. http://www.bikeeffects.com/proddetail.asp?prod=AEJ00002-0000 http://www.bikeeffects.com/proddetail.asp?prod=AEJ00002-0000 http://www.bikeeffects.com/prodimages/aej00002-0000s.jpg Some times specific positioning of the device that you are trying to mount requires additional adjustability of the bracket kit. This Extension Joint offsets the Base Plate or Housing from the main crossbar in the bracket kits. This offset distance is 1.7". http://www.bikeeffects.com/proddetail.asp?prod=AEJ00002-0101 http://www.bikeeffects.com/proddetail.asp?prod=AEJ00002-0101 http://www.bikeeffects.com/prodimages/aej00002-0101s.jpg Some times specific positioning of the device that you are trying to mount requires additional adjustability of the bracket kit. This Extension Joint offsets the Base Plate or Housing from the main crossbar in the bracket kits. This offset distance is 1.7". http://www.bikeeffects.com/proddetail.asp?prod=S1-01 http://www.bikeeffects.com/proddetail.asp?prod=S1-01 These extra large foam covers slip over the existing Mic covers on the SH-006 or PP-06 helmet sets. Package contains 2 foam covers. http://www.bikeeffects.com/proddetail.asp?prod=3-10998 http://www.bikeeffects.com/proddetail.asp?prod=3-10998 http://www.bikeeffects.com/prodimages/small/3-10998-1.jpg FJR1300 Stem Mount (replacement nut system). This mount replaces theO.E.M. stem nut with the our custom nut. Mounts devices in the centerover top triple clamp. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=Norway-6 http://www.bikeeffects.com/proddetail.asp?prod=Norway-6 http://www.bikeeffects.com/prodimages/ USPS Shipping to Norway http://www.bikeeffects.com/proddetail.asp?prod=332-0000 http://www.bikeeffects.com/proddetail.asp?prod=332-0000 http://www.bikeeffects.com/prodimages/3320000s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. 1, 12 volt #194, bulb, or 2 amber LED clusters of 9 LED's each. Choice of lens color and bulb color or style. LED's have a three wire option and can be wired as running lights. Sold in pairs.Clear and smoke lenses are standard, other colors are a special no cost option and will take 2 - 3 weeks before delivery.Fits the following models:• CBR600F• CBR600F4i 01-03• CBR600RR 03-06• CBR1000RR Click Here to see how these flushmounts look installed on the Honda CBR600F4i. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=334-0000 http://www.bikeeffects.com/proddetail.asp?prod=334-0000 http://www.bikeeffects.com/prodimages/334-0900s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. 1, 12 volt #194, bulb, or 2 amber LED clusters of 9 LED's each. Choice of lens color and bulb color or style. Sold in pairs.Fits the following models:• ZX-6R 98-02• ZZR600 03-06• ZX-6R/636 03-04• ZX-9R 98-03• ZX-10R 04-05Click Here to see how these flushmounts look mounted on Kawasakis. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=334-0800 http://www.bikeeffects.com/proddetail.asp?prod=334-0800 http://www.bikeeffects.com/prodimages/334-0800s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. 1, 12 volt #194, bulb, or 2 amber LED clusters of 9 LED's each. Choice of lens color and bulb color or style. Sold in pairs.Click Here to view the lens choices available.Fits the following models:• ZX-7R 96-04• ZX-12RClick Here to see how these flushmounts look mounted on Kawasakis. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=330-0600 http://www.bikeeffects.com/proddetail.asp?prod=330-0600 http://www.bikeeffects.com/prodimages/3300600s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. 1, 12 volt #194, bulb, or 2 amber LED clusters of 9 LED's each. Choice of lens color and bulb color or style. Clear and smoke lenses are stock items, others are a special order, no cost option. Sold in pairs.Fits the following models:• GSX-R600 04-05 • GSX-R750 04-05• GSX-R1000 03-04Also fits older GSX-R series bikes, but may need modifications and depth will not be the same. Click Here to see how these flushmounts look mounted on a GSX-R600. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=333-2500 http://www.bikeeffects.com/proddetail.asp?prod=333-2500 http://www.bikeeffects.com/prodimages/3332500s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. 1, 12 volt #194, bulb, or 2 amber LED clusters of 9 LED's each. Choice of lens color and bulb color or style. LED's have a three wire option and can be wired as running lights. Sold in pairs.Note: Clear and smoke lenses are standard. Other colors are a no cost option, but delivery will take 2 - 3 weeks.• Fits Yamaha FZ1 01-05 onlyClick Here to see how these flushmounts look installed on a FZ1 fairing. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=333-0055 http://www.bikeeffects.com/proddetail.asp?prod=333-0055 http://www.bikeeffects.com/prodimages/3330000s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. 1, 12 volt #194, bulb, or 2 amber LED clusters of 9 LED's each. Choice of lens color and bulb color or style. LED's have a three wire option and can be wired as running lights. Sold in pairs.Note: Remaining stock is limited to Clear Lens, Amber LED's with running light function (same as stock) Fits the following models:• R1 98-01• R6 99-02• YZF600 98-06• FJR1300 02-03Click Here to see how these flushmounts look installed on a YZF and an FJR1300. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=333-0680 http://www.bikeeffects.com/proddetail.asp?prod=333-0680 http://www.bikeeffects.com/prodimages/3330680s.jpg Flush-line insert flushmounts. Made of injected polycarbonate. Contains 2 amber LED clusters of 9 LED's each. No incandescent bulbs available for this model. Choice of lens color. These LED flushmounts have a three wire option and can be wired as running lights. Sold in pairs.Note: Clear and smoke lenses are standard. Other colors are a no cost option, but delivery will take 2 - 3 weeks.Fits the following models:• R1 02-06• R6 03-07• FZ6 03-06 • FZ1 06-08Click Here to see how these flushmounts look installed on an R1. NOTE: The lights are not DOT approved. http://www.bikeeffects.com/proddetail.asp?prod=3020100 http://www.bikeeffects.com/proddetail.asp?prod=3020100 http://www.bikeeffects.com/prodimages/3020100s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber bulb, (special bulb #194 designed for Mototeck Flushmount) Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" & 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001900 http://www.bikeeffects.com/proddetail.asp?prod=3001900 http://www.bikeeffects.com/prodimages/3020160s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base. Has 3 clusters of 9 amber LED's each. These flushmounts have running light capability if your bike is wired for it. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020170 http://www.bikeeffects.com/proddetail.asp?prod=3020170 http://www.bikeeffects.com/prodimages/3020170s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020190 http://www.bikeeffects.com/proddetail.asp?prod=3020190 http://www.bikeeffects.com/prodimages/3020190s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Black Trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020160 http://www.bikeeffects.com/proddetail.asp?prod=3020160 http://www.bikeeffects.com/prodimages/3020160s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber bulb (Special bulb #194 designed for Mototeck Flushmount), Black trim.Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020250 http://www.bikeeffects.com/proddetail.asp?prod=3020250 http://www.bikeeffects.com/prodimages/3020250s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber LED board, Blue trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020230 http://www.bikeeffects.com/proddetail.asp?prod=3020230 http://www.bikeeffects.com/prodimages/3020230s.jpg Flushmount (Elipse Design) made of ABS plastic designed for your Sportbike. Amber lens, Black base, Amber LED board, Blue Ttrim. (With 6 LEDs designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020240 http://www.bikeeffects.com/proddetail.asp?prod=3020240 http://www.bikeeffects.com/prodimages/3020240s.jpg Flushmount (Elipse Design) made of ABS.Amber lens, Black base, Amber LED board, Blue trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020220 http://www.bikeeffects.com/proddetail.asp?prod=3020220 http://www.bikeeffects.com/prodimages/3020220s.jpg Flushmount (Elipse Design) made of ABS. Comes with Amber lens, Black base, Amber bulb, Blue trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020310 http://www.bikeeffects.com/proddetail.asp?prod=3020310 http://www.bikeeffects.com/prodimages/3020310s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Carbon trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020290 http://www.bikeeffects.com/proddetail.asp?prod=3020290 http://www.bikeeffects.com/prodimages/3020290s.jpg Flushmount (Elipse Design) made of ABS Plastic. Comes with Amber lens, Black base, Amber LED board, Carbon trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020300 http://www.bikeeffects.com/proddetail.asp?prod=3020300 http://www.bikeeffects.com/prodimages/3020300s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Carbon trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020280 http://www.bikeeffects.com/proddetail.asp?prod=3020280 http://www.bikeeffects.com/prodimages/3020280s.jpg Flushmount (Elipse Design) made of ABS plastic. Designed for your Sportbike with Amber lens, Black base, Amber bulb with Carbon trim. (Special bulb #194 designed for Mototeck Flushmount) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020710 http://www.bikeeffects.com/proddetail.asp?prod=3020710 http://www.bikeeffects.com/prodimages/3020710s.jpg Flushmount (Elipse Design) Made of ABS Plastic. Comes with Amber lens, Black base, Amber LED board, Green trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020730 http://www.bikeeffects.com/proddetail.asp?prod=3020730 http://www.bikeeffects.com/prodimages/3020730s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Green Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020720 http://www.bikeeffects.com/proddetail.asp?prod=3020720 http://www.bikeeffects.com/prodimages/3020720s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Green Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020700 http://www.bikeeffects.com/proddetail.asp?prod=3020700 http://www.bikeeffects.com/prodimages/3020700s.jpg Flushmount (Elipse Design) made of ABS plastic. Designed for your Sportbike with Amber lens, Black base, Amber bulb with Green Trim. (Special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020110 http://www.bikeeffects.com/proddetail.asp?prod=3020110 http://www.bikeeffects.com/prodimages/3020110s.jpg Flushmount (Elipse Design) Made of ABS. Comes with Amber lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), no trim. Comes with two way tape. Dimensions 1 5/16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020130 http://www.bikeeffects.com/proddetail.asp?prod=3020130 http://www.bikeeffects.com/prodimages/3020130s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber LED board, No Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 5/16 " by 2 5/8" & 33mm by 67mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020120 http://www.bikeeffects.com/proddetail.asp?prod=3020120 http://www.bikeeffects.com/prodimages/3020120s.jpg Flushmount (Elipse Design) made of ABS. Amber lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), No Trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" & 33mm by 67mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020350 http://www.bikeeffects.com/proddetail.asp?prod=3020350 http://www.bikeeffects.com/prodimages/3020350s.jpg Flushmount (Elipse Design) Made of ABS Plastic. Comes with Amber lens, Black base, Amber LED board, Red Trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020370 http://www.bikeeffects.com/proddetail.asp?prod=3020370 http://www.bikeeffects.com/prodimages/3020370s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Red Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020360 http://www.bikeeffects.com/proddetail.asp?prod=3020360 http://www.bikeeffects.com/prodimages/3020360s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Red Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020340 http://www.bikeeffects.com/proddetail.asp?prod=3020340 http://www.bikeeffects.com/prodimages/3020340s.jpg Flushmount (Elipse Design) made of ABS plastic. Designed for your Sportbike with Amber lens, Black base, Amber bulb with Red Trim. (Special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020410 http://www.bikeeffects.com/proddetail.asp?prod=3020410 http://www.bikeeffects.com/prodimages/3020410s.jpg Flushmount (Elipse Design) Made of ABS Plastic. Comes with Amber lens, Black base, Amber LED board, Silver trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020430 http://www.bikeeffects.com/proddetail.asp?prod=3020430 http://www.bikeeffects.com/prodimages/3020430s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Silver Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020420 http://www.bikeeffects.com/proddetail.asp?prod=3020420 http://www.bikeeffects.com/prodimages/3020420s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, Silver Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020400 http://www.bikeeffects.com/proddetail.asp?prod=3020400 http://www.bikeeffects.com/prodimages/3020400s.jpg Flushmount (Elipse Design) made of ABS plastic. Designed for your Sportbike with Amber lens, Black base, Amber bulb with Silver Trim. (Special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020470 http://www.bikeeffects.com/proddetail.asp?prod=3020470 http://www.bikeeffects.com/prodimages/3020470s.jpg Flushmount (Elipse Design) made of ABS plastic. Designed for your Sportbike with Amber lens, Black base, Amber bulb with White Trim. (Special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020490 http://www.bikeeffects.com/proddetail.asp?prod=3020490 http://www.bikeeffects.com/prodimages/3020490s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, White Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020480 http://www.bikeeffects.com/proddetail.asp?prod=3020480 http://www.bikeeffects.com/prodimages/3020480s.jpg Flushmount (Elipse Design) made of ABS plastic. Amber lens, Black base, Amber LED board, White trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020460 http://www.bikeeffects.com/proddetail.asp?prod=3020460 http://www.bikeeffects.com/prodimages/3020460s.jpg Flushmount (Elipse Design) made of ABS plastic. Designed for your Sportbike with Amber lens, Black base, Amber bulb with White Trim. (Special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001901 http://www.bikeeffects.com/proddetail.asp?prod=3001901 http://www.bikeeffects.com/prodimages/3020171s.jpg Flushmount (Square Pattern lenses) made of ABS. Amber lens, Black base. Has 3 clusters of 9 amber LED's each. These flushmounts have running light capability if your bike is wired for it. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020171 http://www.bikeeffects.com/proddetail.asp?prod=3020171 http://www.bikeeffects.com/prodimages/3020171s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Black Trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020191 http://www.bikeeffects.com/proddetail.asp?prod=3020191 http://www.bikeeffects.com/prodimages/3020191s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Black Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020181 http://www.bikeeffects.com/proddetail.asp?prod=3020181 http://www.bikeeffects.com/prodimages/3020181s.jpg Flushmount (Square Pattern) made of ABS plastic. Amber lens, Black base, Amber LED board, Black trim (with 6 LEDs, designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020161 http://www.bikeeffects.com/proddetail.asp?prod=3020161 http://www.bikeeffects.com/prodimages/3020161s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber bulb, (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7/8" by 3 7/16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020231 http://www.bikeeffects.com/proddetail.asp?prod=3020231 http://www.bikeeffects.com/prodimages/3020231s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Blue Trim. (With 6 LEDs designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020251 http://www.bikeeffects.com/proddetail.asp?prod=3020251 http://www.bikeeffects.com/prodimages/3020251s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Blue trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020241 http://www.bikeeffects.com/proddetail.asp?prod=3020241 http://www.bikeeffects.com/prodimages/3020241s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Blue trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020221 http://www.bikeeffects.com/proddetail.asp?prod=3020221 http://www.bikeeffects.com/prodimages/3020221s.jpg Flushmount (Square Pattern) made of ABS. Comes with Amber lens, Black base, Amber bulb, Blue trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020291 http://www.bikeeffects.com/proddetail.asp?prod=3020291 http://www.bikeeffects.com/prodimages/3020291s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Carbon Trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020311 http://www.bikeeffects.com/proddetail.asp?prod=3020311 http://www.bikeeffects.com/prodimages/3020311s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Carbon Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020301 http://www.bikeeffects.com/proddetail.asp?prod=3020301 http://www.bikeeffects.com/prodimages/3020301s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Carbon trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020281 http://www.bikeeffects.com/proddetail.asp?prod=3020281 http://www.bikeeffects.com/prodimages/3020281s.jpg Flushmount (Square Pattern) made of ABS. Comes with Amber lens, Black base, Amber bulb, Carbon trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020711 http://www.bikeeffects.com/proddetail.asp?prod=3020711 http://www.bikeeffects.com/prodimages/3020711s.jpg Black base, Amber LED board, Green Trim. (With 6 LEDs designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020731 http://www.bikeeffects.com/proddetail.asp?prod=3020731 http://www.bikeeffects.com/prodimages/3020731s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Green Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020721 http://www.bikeeffects.com/proddetail.asp?prod=3020721 http://www.bikeeffects.com/prodimages/3020721s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Green trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020701 http://www.bikeeffects.com/proddetail.asp?prod=3020701 http://www.bikeeffects.com/prodimages/3020701s.jpg Flushmount (Square Pattern) made of ABS. Comes with Amber lens, Black base, Amber bulb, Green trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3020111 http://www.bikeeffects.com/proddetail.asp?prod=3020111 http://www.bikeeffects.com/prodimages/3020111s.jpg Flushmount (Square Pattern) Made of ABS. Comes with Amber lens, Black base, Amber LED board, No trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 5/16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020131 http://www.bikeeffects.com/proddetail.asp?prod=3020131 http://www.bikeeffects.com/prodimages/3020131s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, No Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 5/16 " by 2 5/8" & 33mm by 67mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020121 http://www.bikeeffects.com/proddetail.asp?prod=3020121 http://www.bikeeffects.com/prodimages/3020121s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, No Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" & 33mm by 67mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020101 http://www.bikeeffects.com/proddetail.asp?prod=3020101 http://www.bikeeffects.com/prodimages/3020101s.jpg Flushmount (Square Pattern) made of ABS, Amber lens, Black base, Amber bulb, (special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020351 http://www.bikeeffects.com/proddetail.asp?prod=3020351 http://www.bikeeffects.com/prodimages/3020351s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Red trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020371 http://www.bikeeffects.com/proddetail.asp?prod=3020371 http://www.bikeeffects.com/prodimages/3020371s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Red Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020361 http://www.bikeeffects.com/proddetail.asp?prod=3020361 http://www.bikeeffects.com/prodimages/3020361s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Red trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020341 http://www.bikeeffects.com/proddetail.asp?prod=3020341 http://www.bikeeffects.com/prodimages/3020341s.jpg Flushmount (Square Pattern) made of ABS. Comes with Amber lens, Black base, Amber bulb, Red trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020411 http://www.bikeeffects.com/proddetail.asp?prod=3020411 http://www.bikeeffects.com/prodimages/3020411s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Silver trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020431 http://www.bikeeffects.com/proddetail.asp?prod=3020431 http://www.bikeeffects.com/prodimages/3020431s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Silver Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020421 http://www.bikeeffects.com/proddetail.asp?prod=3020421 http://www.bikeeffects.com/prodimages/3020421s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, Silver trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020401 http://www.bikeeffects.com/proddetail.asp?prod=3020401 http://www.bikeeffects.com/prodimages/3020401s.jpg Flushmount (Square Pattern) made of ABS. Comes with Amber lens, Black base, Amber bulb, Silver trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020471 http://www.bikeeffects.com/proddetail.asp?prod=3020471 http://www.bikeeffects.com/prodimages/3020471s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, White trim (with 6 LEDs, designed by Mototeck) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020491 http://www.bikeeffects.com/proddetail.asp?prod=3020491 http://www.bikeeffects.com/prodimages/3020491s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, White Trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020481 http://www.bikeeffects.com/proddetail.asp?prod=3020481 http://www.bikeeffects.com/prodimages/3020481s.jpg Flushmount (Square Pattern) made of ABS. Amber lens, Black base, Amber LED board, White trim (with 6 LEDs designed by Mototeck). These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape, dimension 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3020461 http://www.bikeeffects.com/proddetail.asp?prod=3020461 http://www.bikeeffects.com/prodimages/3020461s.jpg Flushmount (Square Pattern) made of ABS. Comes with Amber lens, Black base, Amber bulb, White trim (special #194 Bulb designed for Mototeck Flushmounts) Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001200 http://www.bikeeffects.com/proddetail.asp?prod=3001200 http://www.bikeeffects.com/prodimages/3000190s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000210 http://www.bikeeffects.com/proddetail.asp?prod=3000210 http://www.bikeeffects.com/prodimages/3000210s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Black Trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000170 http://www.bikeeffects.com/proddetail.asp?prod=3000170 http://www.bikeeffects.com/prodimages/3000170s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000160 http://www.bikeeffects.com/proddetail.asp?prod=3000160 http://www.bikeeffects.com/prodimages/3000160s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000270 http://www.bikeeffects.com/proddetail.asp?prod=3000270 http://www.bikeeffects.com/prodimages/3000270s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Blue trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide http://www.bikeeffects.com/proddetail.asp?prod=3000240 http://www.bikeeffects.com/proddetail.asp?prod=3000240 http://www.bikeeffects.com/prodimages/3000240s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000230 http://www.bikeeffects.com/proddetail.asp?prod=3000230 http://www.bikeeffects.com/prodimages/3000230s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000220 http://www.bikeeffects.com/proddetail.asp?prod=3000220 http://www.bikeeffects.com/prodimages/3000220s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001256 http://www.bikeeffects.com/proddetail.asp?prod=3001256 http://www.bikeeffects.com/prodimages/3000300s.jpg Flushmount, Clear (Elipse) Carbon Trim, (3X9 LED's Amber). Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001276 http://www.bikeeffects.com/proddetail.asp?prod=3001276 http://www.bikeeffects.com/prodimages/3000320s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED's (3 X 9), Carbon trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001216 http://www.bikeeffects.com/proddetail.asp?prod=3001216 http://www.bikeeffects.com/prodimages/3000310s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000330 http://www.bikeeffects.com/proddetail.asp?prod=3000330 http://www.bikeeffects.com/prodimages/3000330s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Carbon trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000300 http://www.bikeeffects.com/proddetail.asp?prod=3000300 http://www.bikeeffects.com/prodimages/3000300s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000290 http://www.bikeeffects.com/proddetail.asp?prod=3000290 http://www.bikeeffects.com/prodimages/3000290s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000280 http://www.bikeeffects.com/proddetail.asp?prod=3000280 http://www.bikeeffects.com/prodimages/3000280s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000750 http://www.bikeeffects.com/proddetail.asp?prod=3000750 http://www.bikeeffects.com/prodimages/3000750s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Green trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000740 http://www.bikeeffects.com/proddetail.asp?prod=3000740 http://www.bikeeffects.com/prodimages/3000740s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Green trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000720 http://www.bikeeffects.com/proddetail.asp?prod=3000720 http://www.bikeeffects.com/prodimages/3000720s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000710 http://www.bikeeffects.com/proddetail.asp?prod=3000710 http://www.bikeeffects.com/prodimages/3000710s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000700 http://www.bikeeffects.com/proddetail.asp?prod=3000700 http://www.bikeeffects.com/prodimages/3000700s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000130 http://www.bikeeffects.com/proddetail.asp?prod=3000130 http://www.bikeeffects.com/prodimages/3000130s.jpg Flushmount (Elipse Design) Made of ABS. Comes with Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), no trim. Comes with two way tape. Dimensions 1 5/16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000150 http://www.bikeeffects.com/proddetail.asp?prod=3000150 http://www.bikeeffects.com/prodimages/3000150s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), no trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 5/16 " by 2 5/8" - 33mm by 67mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000110 http://www.bikeeffects.com/proddetail.asp?prod=3000110 http://www.bikeeffects.com/prodimages/3000110s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Blue bulb, (special bulb #194 designed for Mototeck Flushmount) No trim. Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" & 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000100 http://www.bikeeffects.com/proddetail.asp?prod=3000100 http://www.bikeeffects.com/prodimages/3000100s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Red bulb, (special bulb #194 designed for Mototeck Flushmount) No trim. Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" & 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000370 http://www.bikeeffects.com/proddetail.asp?prod=3000370 http://www.bikeeffects.com/prodimages/3000370s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000390 http://www.bikeeffects.com/proddetail.asp?prod=3000390 http://www.bikeeffects.com/prodimages/3000390s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Red trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000380 http://www.bikeeffects.com/proddetail.asp?prod=3000380 http://www.bikeeffects.com/prodimages/3000380s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Red trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000360 http://www.bikeeffects.com/proddetail.asp?prod=3000360 http://www.bikeeffects.com/prodimages/3000360s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000350 http://www.bikeeffects.com/proddetail.asp?prod=3000350 http://www.bikeeffects.com/prodimages/3000350s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000340 http://www.bikeeffects.com/proddetail.asp?prod=3000340 http://www.bikeeffects.com/prodimages/3000340s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000430 http://www.bikeeffects.com/proddetail.asp?prod=3000430 http://www.bikeeffects.com/prodimages/3000430s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000450 http://www.bikeeffects.com/proddetail.asp?prod=3000450 http://www.bikeeffects.com/prodimages/3000450s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), Silver trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000420 http://www.bikeeffects.com/proddetail.asp?prod=3000420 http://www.bikeeffects.com/prodimages/3000420s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000410 http://www.bikeeffects.com/proddetail.asp?prod=3000410 http://www.bikeeffects.com/prodimages/3000410s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000400 http://www.bikeeffects.com/proddetail.asp?prod=3000400 http://www.bikeeffects.com/prodimages/3000400s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000490 http://www.bikeeffects.com/proddetail.asp?prod=3000490 http://www.bikeeffects.com/prodimages/3000490s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000510 http://www.bikeeffects.com/proddetail.asp?prod=3000510 http://www.bikeeffects.com/prodimages/3000510s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), White trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000500 http://www.bikeeffects.com/proddetail.asp?prod=3000500 http://www.bikeeffects.com/prodimages/3000500s.jpg Flushmount (Elipse Design) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), White trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000480 http://www.bikeeffects.com/proddetail.asp?prod=3000480 http://www.bikeeffects.com/prodimages/3000480s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000470 http://www.bikeeffects.com/proddetail.asp?prod=3000470 http://www.bikeeffects.com/prodimages/3000470s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000460 http://www.bikeeffects.com/proddetail.asp?prod=3000460 http://www.bikeeffects.com/prodimages/3000460s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000191 http://www.bikeeffects.com/proddetail.asp?prod=3000191 http://www.bikeeffects.com/prodimages/3000191s.jpg Flushmount (Square Design) made of ABS plastic designed for your Sport Bike with Clear lens, Black base, Amber Leds board, Black trims ( with 6 Leds designed by Mototeck) with two way tape, dimension 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=3000211 http://www.bikeeffects.com/proddetail.asp?prod=3000211 http://www.bikeeffects.com/prodimages/3000211s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). Black trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001221 http://www.bikeeffects.com/proddetail.asp?prod=3001221 http://www.bikeeffects.com/prodimages/3000201s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck),Black trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000181 http://www.bikeeffects.com/proddetail.asp?prod=3000181 http://www.bikeeffects.com/prodimages/3000181s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts). Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide http://www.bikeeffects.com/proddetail.asp?prod=3000171 http://www.bikeeffects.com/proddetail.asp?prod=3000171 http://www.bikeeffects.com/prodimages/3000171s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts). Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide http://www.bikeeffects.com/proddetail.asp?prod=3000161 http://www.bikeeffects.com/proddetail.asp?prod=3000161 http://www.bikeeffects.com/prodimages/3000161s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts). Black trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000251 http://www.bikeeffects.com/proddetail.asp?prod=3000251 http://www.bikeeffects.com/prodimages/3000251s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000271 http://www.bikeeffects.com/proddetail.asp?prod=3000271 http://www.bikeeffects.com/prodimages/3000271s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). Blue trim These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000261 http://www.bikeeffects.com/proddetail.asp?prod=3000261 http://www.bikeeffects.com/prodimages/3000261s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Blue trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000241 http://www.bikeeffects.com/proddetail.asp?prod=3000241 http://www.bikeeffects.com/prodimages/3000241s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts). Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000231 http://www.bikeeffects.com/proddetail.asp?prod=3000231 http://www.bikeeffects.com/prodimages/3000231s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts). Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000221 http://www.bikeeffects.com/proddetail.asp?prod=3000221 http://www.bikeeffects.com/prodimages/3000221s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts). Blue trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000311 http://www.bikeeffects.com/proddetail.asp?prod=3000311 http://www.bikeeffects.com/prodimages/3000311s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000331 http://www.bikeeffects.com/proddetail.asp?prod=3000331 http://www.bikeeffects.com/prodimages/3000331s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). Carbon trim These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000321 http://www.bikeeffects.com/proddetail.asp?prod=3000321 http://www.bikeeffects.com/prodimages/3000321s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Carbon trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000301 http://www.bikeeffects.com/proddetail.asp?prod=3000301 http://www.bikeeffects.com/prodimages/3000301s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts). Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000291 http://www.bikeeffects.com/proddetail.asp?prod=3000291 http://www.bikeeffects.com/prodimages/3000291s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts). Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000281 http://www.bikeeffects.com/proddetail.asp?prod=3000281 http://www.bikeeffects.com/prodimages/3000281s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts). Carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide http://www.bikeeffects.com/proddetail.asp?prod=3000731 http://www.bikeeffects.com/proddetail.asp?prod=3000731 http://www.bikeeffects.com/prodimages/3000731s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000751 http://www.bikeeffects.com/proddetail.asp?prod=3000751 http://www.bikeeffects.com/prodimages/3000751s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). Green trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000741 http://www.bikeeffects.com/proddetail.asp?prod=3000741 http://www.bikeeffects.com/prodimages/3000741s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Green trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000721 http://www.bikeeffects.com/proddetail.asp?prod=3000721 http://www.bikeeffects.com/prodimages/3000721s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000711 http://www.bikeeffects.com/proddetail.asp?prod=3000711 http://www.bikeeffects.com/prodimages/3000711s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000701 http://www.bikeeffects.com/proddetail.asp?prod=3000701 http://www.bikeeffects.com/prodimages/3000701s.jpg Flushmount (Elipse Design) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Green trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. Click Here for Kawasaki mounting. http://www.bikeeffects.com/proddetail.asp?prod=3000141 http://www.bikeeffects.com/proddetail.asp?prod=3000141 http://www.bikeeffects.com/prodimages/3000141s.jpg Flushmount (Square Design) made of ABS plastic designed for your Sport Bike with Clear lens, Black base, Amber Leds board, ( with 6 Leds designed by Mototeck) with running light capacity, with two way tape, dimension 1 5\16 " by 2 5\8" & 33mm by 67mm12volt, sold in pairs. Note: those Leds flushmount runs with 3 wires connection. http://www.bikeeffects.com/proddetail.asp?prod=3000131 http://www.bikeeffects.com/proddetail.asp?prod=3000131 http://www.bikeeffects.com/prodimages/3000131s.jpg Flushmount (Square Pattern) Made of ABS. Comes with Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), no trim. Comes with two way tape. Dimensions 1 5/16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000151 http://www.bikeeffects.com/proddetail.asp?prod=3000151 http://www.bikeeffects.com/prodimages/3000151s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck), no trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 5/16 " by 2 5/8" - 33mm by 67mm. 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000121 http://www.bikeeffects.com/proddetail.asp?prod=3000121 http://www.bikeeffects.com/prodimages/3000121s.jpg Flushmount (Square Pattern) made of ABS, Clear lens, Black base, Amber bulb (special bulb #194 designed for Mototeck Flushmount). Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000111 http://www.bikeeffects.com/proddetail.asp?prod=3000111 http://www.bikeeffects.com/prodimages/3000111s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Blue bulb (special bulb #194 designed for Mototeck Flushmount). No trim. Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000101 http://www.bikeeffects.com/proddetail.asp?prod=3000101 http://www.bikeeffects.com/prodimages/3000101s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Red bulb (special #194 bulb designed for Mototeck Flushmount). No trim. Comes with two way tape. Dimensions 1 5\16 " by 2 5\8" - 33mm by 67mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000371 http://www.bikeeffects.com/proddetail.asp?prod=3000371 http://www.bikeeffects.com/prodimages/3000371s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000391 http://www.bikeeffects.com/proddetail.asp?prod=3000391 http://www.bikeeffects.com/prodimages/3000391s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). Red trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000381 http://www.bikeeffects.com/proddetail.asp?prod=3000381 http://www.bikeeffects.com/prodimages/3000381s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Red trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000361 http://www.bikeeffects.com/proddetail.asp?prod=3000361 http://www.bikeeffects.com/prodimages/3000361s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000351 http://www.bikeeffects.com/proddetail.asp?prod=3000351 http://www.bikeeffects.com/prodimages/3000351s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000341 http://www.bikeeffects.com/proddetail.asp?prod=3000341 http://www.bikeeffects.com/prodimages/3000341s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Red trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000431 http://www.bikeeffects.com/proddetail.asp?prod=3000431 http://www.bikeeffects.com/prodimages/3000431s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck) Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000451 http://www.bikeeffects.com/proddetail.asp?prod=3000451 http://www.bikeeffects.com/prodimages/3000451s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). Silver trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000441 http://www.bikeeffects.com/proddetail.asp?prod=3000441 http://www.bikeeffects.com/prodimages/3000441s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), Silver trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000411 http://www.bikeeffects.com/proddetail.asp?prod=3000411 http://www.bikeeffects.com/prodimages/3000411s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000401 http://www.bikeeffects.com/proddetail.asp?prod=3000401 http://www.bikeeffects.com/prodimages/3000401s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), Silver trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide http://www.bikeeffects.com/proddetail.asp?prod=3000491 http://www.bikeeffects.com/proddetail.asp?prod=3000491 http://www.bikeeffects.com/prodimages/3000491s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000511 http://www.bikeeffects.com/proddetail.asp?prod=3000511 http://www.bikeeffects.com/prodimages/3000511s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs designed by Mototeck). White trim. These lights have running light capability, and sequentially flash in running light mode, but operate normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm, 12volt. Sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000501 http://www.bikeeffects.com/proddetail.asp?prod=3000501 http://www.bikeeffects.com/prodimages/3000501s.jpg Flushmount (Square Pattern) made of ABS. Clear lens, Black base, Amber LED board (with 6 LEDs, designed by Mototeck), White trim. These lights have running light capability, and remain on steady in running light mode, but flash normally when used as turn signals. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" & 48mm by 98mm12volt, sold in pairs. Note: These LED flushmounts run with a 3 wire connection. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000481 http://www.bikeeffects.com/proddetail.asp?prod=3000481 http://www.bikeeffects.com/prodimages/3000481s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Amber bulb (special #194 Bulb designed for Mototeck Flushmounts), White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000471 http://www.bikeeffects.com/proddetail.asp?prod=3000471 http://www.bikeeffects.com/prodimages/3000471s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Blue bulb (special #194 Bulb designed for Mototeck Flushmounts), White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3000461 http://www.bikeeffects.com/proddetail.asp?prod=3000461 http://www.bikeeffects.com/prodimages/3000461s.jpg Flushmount (Square Pattern) made of ABS. Comes with Clear lens, Black base, Red bulb (special #194 Bulb designed for Mototeck Flushmounts), White trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3010310 http://www.bikeeffects.com/proddetail.asp?prod=3010310 http://www.bikeeffects.com/prodimages/3010310s.jpg Flushmount (elipse design) made of ABS. smoke lens, black base, amber LED board (with 6 LEDs designed by Mototeck) carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12 volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001336 http://www.bikeeffects.com/proddetail.asp?prod=3001336 http://www.bikeeffects.com/prodimages/3010300s.jpg Flushmount (Elipse Design) made of ABS. Comes with smoke lens, black base, red bulb (special #194 bulb designed for Mototeck flushmounts), carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12 volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3001322 http://www.bikeeffects.com/proddetail.asp?prod=3001322 http://www.bikeeffects.com/prodimages/3010480s.jpg Flushmount (elipse design) made of ABS. Comes with smoke lens, black base, amber bulb (special #194 bulb designed for Mototeck flushmounts), white trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12 volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3010311 http://www.bikeeffects.com/proddetail.asp?prod=3010311 http://www.bikeeffects.com/prodimages/3010311s.jpg Flushmount (square pattern) made of ABS. smoke lens, black base, amber LED board (with 6 LEDs designed by Mototeck) carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12 volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3010301 http://www.bikeeffects.com/proddetail.asp?prod=3010301 http://www.bikeeffects.com/prodimages/3010301s.jpg Flushmount (square design) made of ABS. Comes with smoke lens, black base, red bulb (special #194 bulb designed for Mototeck flushmounts), carbon trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12 volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=3010481 http://www.bikeeffects.com/proddetail.asp?prod=3010481 http://www.bikeeffects.com/prodimages/3010481s.jpg Flushmount (square design) made of ABS. Comes with smoke lens, black base, amber bulb (special #194 bulb designed for Mototeck flushmounts), white trim. Comes with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 12 volt. Sold in pairs. These units are not DOT approved. Note: Click Here to read the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=KR0005 http://www.bikeeffects.com/proddetail.asp?prod=KR0005 http://www.bikeeffects.com/prodimages/kr0001s.jpg Precision CNC machined, designed for quick & easy adjustment of fork spring preload. Fits the following models: Kawasaki ZX7, ZRX1100, Early ZX9 Suzuki GSX-R1100 95-98 Triumph 600, Thunderbird Sport http://www.bikeeffects.com/proddetail.asp?prod=KR0003 http://www.bikeeffects.com/proddetail.asp?prod=KR0003 http://www.bikeeffects.com/prodimages/kr0001s.jpg Precision CNC machined, designed for quick & easy adjustment of fork spring preload. 17mm Hex. Fits the following models: Yamaha: R6, FZ1, YZF600, FZR1000 Kawasaki: ZX-9R (1998-2001), ZX-6 (1998-2001), ZX-12R Suzuki: TL1000R, TL1000S http://www.bikeeffects.com/proddetail.asp?prod=KR0001 http://www.bikeeffects.com/proddetail.asp?prod=KR0001 http://www.bikeeffects.com/prodimages/kr0001s.jpg Precision CNC machined, designed for quick & easy adjustment of fork spring preload.Available in blue only. Fits the following models: Honda: CBR900RR, CBR600F2 (1994), CBR600F3, CBR600F4, CBR600F4i, VTR1000 Suzuki:GSX-R600/750 (1989-1990) Triumph:595 http://www.bikeeffects.com/proddetail.asp?prod=KR0002 http://www.bikeeffects.com/proddetail.asp?prod=KR0002 http://www.bikeeffects.com/prodimages/kr0001s.jpg Precision CNC machined, designed for quick & easy adjustment of fork spring preload. 22mm Hex. Sold in pairs. Fits the following models: Honda: RC51, CBR929, CBR954 Suzuki: GSX-R750 (1996-2001) Ducati: 996, 900 Aprilia: 1000 Bimota Paoli Forks http://www.bikeeffects.com/proddetail.asp?prod=4100180 http://www.bikeeffects.com/proddetail.asp?prod=4100180 http://www.bikeeffects.com/prodimages/4100180s.jpg Frame Slider, in CNC Aluminum, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4100160 http://www.bikeeffects.com/proddetail.asp?prod=4100160 http://www.bikeeffects.com/prodimages/4100160s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4100170 http://www.bikeeffects.com/proddetail.asp?prod=4100170 http://www.bikeeffects.com/prodimages/4100170s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4100130 http://www.bikeeffects.com/proddetail.asp?prod=4100130 http://www.bikeeffects.com/prodimages/4100130s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4100140 http://www.bikeeffects.com/proddetail.asp?prod=4100140 http://www.bikeeffects.com/prodimages/4100140s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4100100 http://www.bikeeffects.com/proddetail.asp?prod=4100100 http://www.bikeeffects.com/prodimages/4100100s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4100110 http://www.bikeeffects.com/proddetail.asp?prod=4100110 http://www.bikeeffects.com/prodimages/4100110s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000100 http://www.bikeeffects.com/proddetail.asp?prod=4000100 http://www.bikeeffects.com/prodimages/4000100s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000110 http://www.bikeeffects.com/proddetail.asp?prod=4000110 http://www.bikeeffects.com/prodimages/4000110s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000130 http://www.bikeeffects.com/proddetail.asp?prod=4000130 http://www.bikeeffects.com/prodimages/4000130s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000140 http://www.bikeeffects.com/proddetail.asp?prod=4000140 http://www.bikeeffects.com/prodimages/4000140s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000160 http://www.bikeeffects.com/proddetail.asp?prod=4000160 http://www.bikeeffects.com/prodimages/4000160s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. Sliders and mounting bolts included. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=4000170 http://www.bikeeffects.com/proddetail.asp?prod=4000170 http://www.bikeeffects.com/prodimages/4000170s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. Sliders and mounting bolts included. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=4000250 http://www.bikeeffects.com/proddetail.asp?prod=4000250 http://www.bikeeffects.com/prodimages/4000250s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000260 http://www.bikeeffects.com/proddetail.asp?prod=4000260 http://www.bikeeffects.com/prodimages/4000260s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000280 http://www.bikeeffects.com/proddetail.asp?prod=4000280 http://www.bikeeffects.com/prodimages/4000280s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000290 http://www.bikeeffects.com/proddetail.asp?prod=4000290 http://www.bikeeffects.com/prodimages/4000290s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000220 http://www.bikeeffects.com/proddetail.asp?prod=4000220 http://www.bikeeffects.com/prodimages/4000220s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000230 http://www.bikeeffects.com/proddetail.asp?prod=4000230 http://www.bikeeffects.com/prodimages/4000230s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000340 http://www.bikeeffects.com/proddetail.asp?prod=4000340 http://www.bikeeffects.com/prodimages/4000340s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000370 http://www.bikeeffects.com/proddetail.asp?prod=4000370 http://www.bikeeffects.com/prodimages/4000370s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000310 http://www.bikeeffects.com/proddetail.asp?prod=4000310 http://www.bikeeffects.com/prodimages/4000310s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4000180 http://www.bikeeffects.com/proddetail.asp?prod=4000180 http://www.bikeeffects.com/prodimages/4000180s.jpg Frame Slider set made of CNC machined Aluminum. Mounting bolts included. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=4200101 http://www.bikeeffects.com/proddetail.asp?prod=4200101 http://www.bikeeffects.com/prodimages/4200101s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. 2 Sliders and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200100 http://www.bikeeffects.com/proddetail.asp?prod=4200100 http://www.bikeeffects.com/prodimages/4200100s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. This 3 slider set includes a slider for the clutch housing. Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200102 http://www.bikeeffects.com/proddetail.asp?prod=4200102 http://www.bikeeffects.com/prodimages/4200102s.jpg Frame Slider, Clutch Housing only. Made of UHMW HQ plastic for shock and heat resistance.Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200111 http://www.bikeeffects.com/proddetail.asp?prod=4200111 http://www.bikeeffects.com/prodimages/4200111s.jpg Frame Slider,, made of UHMW HQ plastic for shock and heat resistance, Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200110 http://www.bikeeffects.com/proddetail.asp?prod=4200110 http://www.bikeeffects.com/prodimages/4200110s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. This 3 slider set includes a slider for the clutch housing. Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200112 http://www.bikeeffects.com/proddetail.asp?prod=4200112 http://www.bikeeffects.com/prodimages/4200112s.jpg Frame Slider, Clutch Housing only. Made of UHMW HQ plastic for shock and heat resistance.Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200130 http://www.bikeeffects.com/proddetail.asp?prod=4200130 http://www.bikeeffects.com/prodimages/4200130s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. This 3 slider set includes a slider for the clutch housing. Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200132 http://www.bikeeffects.com/proddetail.asp?prod=4200132 http://www.bikeeffects.com/prodimages/4200132s.jpg Frame Slider, Clutch Housing only. Made of UHMW HQ plastic for shock and heat resistance.Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200141 http://www.bikeeffects.com/proddetail.asp?prod=4200141 http://www.bikeeffects.com/prodimages/4200141s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. 2 Sliders and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200140 http://www.bikeeffects.com/proddetail.asp?prod=4200140 http://www.bikeeffects.com/prodimages/4200140s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. This 3 slider set includes a slider for the clutch housing. Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200142 http://www.bikeeffects.com/proddetail.asp?prod=4200142 http://www.bikeeffects.com/prodimages/4200142s.jpg Frame Slider, Clutch Housing only. Made of UHMW HQ plastic for shock and heat resistance.Slider and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200160 http://www.bikeeffects.com/proddetail.asp?prod=4200160 http://www.bikeeffects.com/prodimages/4200160s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. 2 Sliders and screws included. http://www.bikeeffects.com/proddetail.asp?prod=4200170 http://www.bikeeffects.com/proddetail.asp?prod=4200170 http://www.bikeeffects.com/prodimages/4200170s.jpg Frame Slider, made of UHMW HQ plastic for shock and heat resistance. 2 Sliders and screws included. http://www.bikeeffects.com/proddetail.asp?prod=S-GSX13PIN http://www.bikeeffects.com/proddetail.asp?prod=S-GSX13PIN http://www.bikeeffects.com/prodimages/small/S-GSX13PIN-1.jpg Fuel Tank Release Pin for 2007 and earlier Suzuki GSX1300R. http://www.bikeeffects.com/proddetail.asp?prod=S-GSX138PIN http://www.bikeeffects.com/proddetail.asp?prod=S-GSX138PIN http://www.bikeeffects.com/prodimages/small/S-GSX138PIN-1.jpg Fuel Tank Quick-Release Pin for 2008 GSX1300R. http://www.bikeeffects.com/proddetail.asp?prod=FZ1_Undertail http://www.bikeeffects.com/proddetail.asp?prod=FZ1_Undertail http://www.bikeeffects.com/prodimages/FZ1_Undertails.jpg Great Looking new Mototeck by Dussault Undertail for the FZ1. http://www.bikeeffects.com/proddetail.asp?prod=40-500 http://www.bikeeffects.com/proddetail.asp?prod=40-500 http://www.bikeeffects.com/prodimages/40-400s.jpg The G2 Throttle Tube is made to correct the overly sensitive throttle on the Honda ST1300 by changing the shape of the cam that pulls the throttle cable. This easy to install throttle tube and cam assembly is machined from 6061 billet aluminum and is fitted Delrin® bushings to increase smoothness of operation. http://www.bikeeffects.com/proddetail.asp?prod=40-400 http://www.bikeeffects.com/proddetail.asp?prod=40-400 http://www.bikeeffects.com/prodimages/40-400s.jpg The G2 Throttle Tube is made to correct the overly sensitive throttle onthe '06 and '07 Yamaha FJR1300 by changing the shape of the cam thatpulls the throttle cable. It can be used on other year models ifdesired. This easy to install throttle tube and cam assembly is machinedfrom 6061 billet aluminum. Delrin® inserts installed to increasesmoothness of operation. http://www.bikeeffects.com/proddetail.asp?prod=FD-HH-SUZ http://www.bikeeffects.com/proddetail.asp?prod=FD-HH-SUZ The new Galfer HH compounds are formulated onadvanced Ceramic composites. This new Advanced Ceramic material can achievefriction peaks as high as 0.7u!!!, almost unheard of in our industry. We wanted to push the envelope with this new compound. The advanced ceramics allow the brake pads to self cool and dissipate their own heat once the rider releases the brake lever. Pads without this type of compound tend to retain heat and “fade” under hard or repeated braking. This new compound is also easier on the rotorsthan most other sintered metallic compound brake pads. Sold in Pkg of two pads. Good for one caliper. http://www.bikeeffects.com/proddetail.asp?prod=FD-HH-HON http://www.bikeeffects.com/proddetail.asp?prod=FD-HH-HON The new Galfer HH compounds are formulated onadvanced Ceramic composites. This new Advanced Ceramic material can achievefriction peaks as high as 0.7u!!!, almost unheard of in our industry. We wanted to push the envelope with this newcompound. The advanced ceramics allow the brake pads to self cool and dissipatetheir own heat once the rider releases the brake lever. Pads without this typeof compound tend to retain heat and “fade” under hard or repeated braking. This new compound is also easier on the rotorsthan most other sintered metallic compound brake pads. Sold in Pkg of two pads. Good for one caliper. Two Pkgs required for dual front disks. http://www.bikeeffects.com/proddetail.asp?prod=FD-HH-YAM http://www.bikeeffects.com/proddetail.asp?prod=FD-HH-YAM The new Galfer HH compounds are formulated onadvanced Ceramic composites. This new Advanced Ceramic material can achievefriction peaks as high as 0.7u!!!, almost unheard of in our industry. We wanted to push the envelope with this new compound. The advanced ceramics allow the brake pads to self cool and dissipate their own heat once the rider releases the brake lever. Pads without this type of compound tend to retain heat and “fade” under hard or repeated braking. This new compound is also easier on the rotors than most other sintered metallic compound brake pads. Sold in two Packages of two pads per package. Good for two calipers. http://www.bikeeffects.com/proddetail.asp?prod=G-SSRBL http://www.bikeeffects.com/proddetail.asp?prod=G-SSRBL Galfer Stainless Steel rear brake lines. Choice of line and banjofitting colors. http://www.bikeeffects.com/proddetail.asp?prod=FK003D-01 http://www.bikeeffects.com/proddetail.asp?prod=FK003D-01 http://www.bikeeffects.com/prodimages/galfer_liness.jpg Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. You can choose from Clear, Black, Smoke, Blue, Red, or Yellow coatings. The Standard fittings are polished Silver on Brass with matching bolts. Gold finished fittings and bolts are $10.00 extra. http://www.bikeeffects.com/proddetail.asp?prod=FK003D-02 http://www.bikeeffects.com/proddetail.asp?prod=FK003D-02 http://www.bikeeffects.com/prodimages/galfer_liness.jpg Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. You can choose from Clear, Black, Smoke, Blue, Red, or Yellow coatings. The Standard fittings are polished Silver on Brass with matching bolts. Gold finished fittings and bolts are $10.00 extra. http://www.bikeeffects.com/proddetail.asp?prod=FK003D-03 http://www.bikeeffects.com/proddetail.asp?prod=FK003D-03 http://www.bikeeffects.com/prodimages/galfer_liness.jpg Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. You can choose from Clear, Black, Smoke, Blue, Red, or Yellow coatings. The Standard fittings are polished Silver on Brass with matching bolts. Gold finished fittings and bolts are $10.00 extra. http://www.bikeeffects.com/proddetail.asp?prod=FK003D-04 http://www.bikeeffects.com/proddetail.asp?prod=FK003D-04 http://www.bikeeffects.com/prodimages/galfer_liness.jpg Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. You can choose from Clear, Black, Smoke, Blue, Red, or Yellow coatings. The Standard fittings are polished Silver on Brass with matching bolts. Gold finished fittings and bolts are $10.00 extra. NOTE: Gold fittings not available for FJR1300ABS Kits. NOTE: No returns on lines with custom lengths. http://www.bikeeffects.com/proddetail.asp?prod=DF000-01 http://www.bikeeffects.com/proddetail.asp?prod=DF000-01 http://www.bikeeffects.com/prodimages/df000s.jpg These Rotors are Laser cut (not stamped) to make sure that stresses are not applied to the product during the manufacturing process. They are made of high carbon content steel for a high coefficient of friction. Each rotor is Pre-heat treated so that the rotor is less likely to warp under heavy use. These double, parallel discs are ground to a diamond finish for perfect flatness. MSRP $640.00 http://www.bikeeffects.com/proddetail.asp?prod=DF000-02 http://www.bikeeffects.com/proddetail.asp?prod=DF000-02 http://www.bikeeffects.com/prodimages/df000s.jpg These Rotors are Laser cut (not stamped) to make sure that stresses are not applied to the product during the manufacturing process. They are made of high carbon content steel for a high coefficient of friction. Each rotor is Pre-heat treated so that the rotor is less likely to warp under heavy use. These double, parallel discs are ground to a diamond finish for perfect flatness. MSRP $640.00 http://www.bikeeffects.com/proddetail.asp?prod=DF000-03 http://www.bikeeffects.com/proddetail.asp?prod=DF000-03 http://www.bikeeffects.com/prodimages/df000s.jpg These Rotors are Laser cut (not stamped) to make sure that stresses are not applied to the product during the manufacturing process. They are made of high carbon content steel for a high coefficient of friction. Each rotor is Pre-heat treated so that the rotor is less likely to warp under heavy use. These double, parallel discs are ground to a diamond finish for perfect flatness. MSRP $640.00 http://www.bikeeffects.com/proddetail.asp?prod=DF000-04 http://www.bikeeffects.com/proddetail.asp?prod=DF000-04 http://www.bikeeffects.com/prodimages/df000s.jpg These Rotors are Laser cut (not stamped) to make sure that stresses are not applied to the product during the manufacturing process. They are made of high carbon content steel for a high coefficient of friction. Each rotor is Pre-heat treated so that the rotor is less likely to warp under heavy use. These double, parallel discs are ground to a diamond finish for perfect flatness. MSRP $640.00 http://www.bikeeffects.com/proddetail.asp?prod=PPC-003-DB http://www.bikeeffects.com/proddetail.asp?prod=PPC-003-DB http://www.bikeeffects.com/prodimages/ppc003s.jpg Connect your Garmin 7-pin flat audio through our Powerlet plug. Works on Garmin 26XX series and 2700 series models. http://www.bikeeffects.com/proddetail.asp?prod=GPS-XM http://www.bikeeffects.com/proddetail.asp?prod=GPS-XM http://www.bikeeffects.com/prodimages/gps-xms.jpg Powder coated steel bracket. Pre-drilled to mount onto the TechMount top plate or P/N 60003 Quick Change Adapter. This bracket provides a secure and compact round place to attach your Garmin XM radio antenna. Similar to the XM-AB but with a round mounting surface. Black only. http://www.bikeeffects.com/proddetail.asp?prod=010-10495-00 http://www.bikeeffects.com/proddetail.asp?prod=010-10495-00 http://www.bikeeffects.com/prodimages/010-10495-00s.jpg Garmin motorcycle mounting kit includes unit bracket, power/audio cable and screws. http://www.bikeeffects.com/proddetail.asp?prod=010-10495-02 http://www.bikeeffects.com/proddetail.asp?prod=010-10495-02 http://www.bikeeffects.com/prodimages/010-10495-02.gif Connects your 2610, 2720 or 2730 GPS to your motorcycle battery and has the audio plug (2.5mm female) right next to GPS. That way you can connect your helmet speakers directly to it. http://www.bikeeffects.com/proddetail.asp?prod=010-00408-02 http://www.bikeeffects.com/proddetail.asp?prod=010-00408-02 http://www.bikeeffects.com/prodimages/2720s.jpg In addition to the turn-by-turn voice prompted navigation available in earlier StreetPilot models, the 2720’s text-to-speech functionality allows the unit to audibly announce the name of upcoming streets and points of interest (POIs), letting drivers keep their eyes on the road while navigating through busy traffic and tricky roadways. For drivers in congested metropolitan areas, Garmin offers the GTM 10, an optional FM RDS-TMC traffic receiver that receives digital information (where available) on traffic, road construction, and weather-related tie-ups. The GTM 10 receives data from selected FM broadcast stations in select cities throughout the United States and Europe. This optional feature lets drivers see congested areas via a color-coded map. When connected to the GTM 10, the StreetPilot 2720 uses this data to automatically calculate and suggest alternative routes based on the traffic information. The StreetPilot 2720 also boasts a new WQVGA, color, automotive-grade, sunlight-readable, touchscreen display that automatically adjusts the unit’s backlight for optimum viewing in any amount of light. Drivers can view the map in a three-dimensional perspective, or a top-down track-up or north-up view.The StreetPilot 2720 also boasts a new WQVGA, color, automotive-grade, sunlight-readable, touchscreen display that automatically adjusts the unit’s backlight for optimum viewing in any amount of light. Drivers can view the map in a three-dimensional perspective, or a top-down track-up or north-up view.The StreetPilot 2720 also boasts a new WQVGA, color, automotive-grade, sunlight-readable, touchscreen display that automatically adjusts the unit’s backlight for optimum viewing in any amount of light. Drivers can view the map in a three-dimensional perspective, or a top-down track-up or north-up view.The StreetPilot 2720 also boasts a new WQVGA, color, automotive-grade, sunlight-readable, touchscreen display that automatically adjusts the unit’s backlight for optimum viewing in any amount of light. Drivers can view the map in a three-dimensional perspective, or a top-down track-up or north-up view. The StreetPilot 2720 comes preprogrammed with City Navigator™ North America NT maps—containing detailed road maps throughout the entire United States, Canada, and Puerto Rico. This map database features nearly six million POIs —including hotels, restaurants, gas stations, ATMs, and attractions. As an added benefit, you can now import customized points of interest with the help of Garmin's free POI Loader software. The possibilities are endless — upload safety cameras or school zones, and you will receive a warning if you are traveling too fast. In addition, an optional proximity-alert feature notifies you of upcoming custom POIs. In addition to point-to-point navigation, the StreetPilot 2720 can calculate the most efficient route between multiple destinations—a real time-saver for realtors, sales forces, and errand-runners. Drivers can also tell the unit to avoid specific areas or road segments when calculating a route. Features: ● Preloaded maps—ready to use out of the box ● Built-in patch antenna; MCX-type connector for optional external GPS antenna connection ● Turn-by-turn directions ● Avoid traffic tie-ups using optional GTM 10 FM TMC traffic receiver ● Text-to-speech feature delivers street and POI names, as well as addresses, so you can keep your eyes on the road ● Arrange destinations to minimize trip distance—a real time-saver for realtors, sales forces, and errand-runners ● Import custom POIs such as restaurants and safety cameras from industry-standard CSV files ● Proximity-alert feature warns of upcoming custom POIs, such as safety cameras and school zones ● Touch-screen and alphanumeric remote control ● View the map in either a three-dimensional perspective or top-down track-up or north-up view ● 3.8”-diagonal WQVGA color, automotive-grade, sunlight-readable TFT display; 3.3”W x 1.7”H; 454 x 240 pixels ● Unit dimensions: 5.6” W x 3.2” H x 2.0” D ● Weight: .93 pounds ● Built-in photo sensor adjusts for light conditions automatically ● Integrated dash mounting system provides easy adjustment and quick release Retail price $$1076.91. Call for special pricing. http://www.bikeeffects.com/proddetail.asp?prod=010-00517-05 http://www.bikeeffects.com/proddetail.asp?prod=010-00517-05 http://www.bikeeffects.com/prodimages/2820s.jpg With preloaded street maps and built-in Bluetooth® wireless capability, Garmin’s StreetPilot® 2820 is the ideal road companion for your car or motorcycle.  Featuring hands-free calling, real-time traffic capabilities, MP3 player, audio book player, and an extensive points-of-interest database — this deluxe navigator has it all.   Place hands-free calls with Bluetooth wireless technology The StreetPilot 2820 integrates wireless technology with a microphone and speaker that lets you make hands-free calls on a compatible Bluetooth phone. Motorcyclists can connect a Bluetooth-enabled headset or helmet* simultaneously with a Bluetooth phone to the StreetPilot 2820 to talk hands-free on the road or receive wireless navigation audio prompts to their destination. In addition, easily look-up and dial numbers from your personalized phone book or from your phone’s call history log. Don’t know the phone number for your destination? Simply find and dial it from the StreetPilot 2820’s extensive points of interest database — including hotels, restaurants, stores, and attractions. Navigate with Ease The StreetPilot 2820 comes ready to use out of the box with preloaded maps of Europe or North America. Simply enter a destination, and you’re automatically routed with turn-by-turn voice directions that speak street names. A fingertip touch screen interface, remote control, and 2D or 3D map perspective combined with the ability to arrange destinations to minimize trip distance make navigation easy. It also accepts customized points of interest (POIs) such as school zones, safety cameras, and LPG filling stations and includes proximity alerts to warn of upcoming POIs. Avoid Traffic Tie-ups Monitor traffic tie-ups with the addition of an optional FM TMC traffic receiver or XM smart antenna. By adding traffic services and a receiver/antenna to your SteetPilot 2820, it notifies you of accidents, road construction, and weather-related traffic delays before they are encountered, and then offers an alternate route. Simply touch the screen icon to calculate a new route. In addition to valuable traffic information, the GXM 30 and subscription to XM NavTraffic also provide basic weather information such as current conditions, forecasts, and Severe Weather Alerts. Enjoy MP3, Audio Book Player and optional XM Radio The StreetPilot 2820’s MP3 player, audio book player and optional XM Radio keep you entertained on the road. The MP3 player allows you to browse music by artist, album, and/or song.  Optional audio books may be purchased from audible.com which features over 70,000 hours of audio programs. A subscription to XM Radio along with the GXM 30 smart antenna provide over 150 plus channels of commercial-free music, sports, news, talk and entertainment programming. StreetPilot 2820: Garmin's full-featured GPS navigator for your car or motorcycleStreetPilot 2820 Features: Receiver: WAAS-enabled 12 parallel channel GPS Display: 3.3” W x 1.7” H (3.8” diag.), 454 x 240 pixels; bright, automotive-grade 64K color TFT with automatic dimming backlight and touch screen Unit dimensions: 5.6" W x 3.2" H x 2.0" D Weight: 0.91 pounds (411 g) Bluetooth wireless technology for hands-free calling and navigation audio prompts Supports FM TMC traffic alerting XM NavTraffic capabilities Preloaded maps for all of North America or Europe Voice announces streets by name Look up addresses and points of interest Choose 2D or 3D map perspective Fingertip touch-screen interface and remote control Upload custom POIs, including alerts for speed zones, safety cams, and LPG filling stations Built-in MP3 and audio book player Waterproof: IEC 60529 IPX7 standards (submersible in one meter of water for up to 30 mins.) 2.5 mm microphone input & 3.5 mm stereo headphone/line-out jack Improved track log with 10,000 track log points MSRP $1184.60. Call for special pricing http://www.bikeeffects.com/proddetail.asp?prod=60007 http://www.bikeeffects.com/proddetail.asp?prod=60007 http://www.bikeeffects.com/prodimages/small/60007-1.jpg Accessory plate necessary for mounting a Garmin zumo® 660 to any TechMount. Comes in Black or Silver. http://www.bikeeffects.com/proddetail.asp?prod=010-10859-00 http://www.bikeeffects.com/proddetail.asp?prod=010-10859-00 http://www.bikeeffects.com/prodimages/010-10859-00s.jpg Motorcycle Mounting Bracket for Garmin zumo® 450 & 550. http://www.bikeeffects.com/proddetail.asp?prod=010-00567-00 http://www.bikeeffects.com/proddetail.asp?prod=010-00567-00 http://www.bikeeffects.com/prodimages/zumos.jpg Designed by bikers, zûmo’s motorcycle-friendly features make it easy to operate 2.8” W x 2.1” H, 320 x 240 pixels, high bright sunlight-readable, UV-resistant, touch-screen displayRemovable Li-Ion battery; up to 4 hours of use Bluetooth™ wireless technology for hands-free calling and navigation audio promptsSupports optional FM TMC traffic alertsSupports optional XM NavTraffic with XM Weather and XM Satellite RadioComes preloaded with City Navigator® NT maps - containing detailed road maps of entire U.S., Canada and Puerto RicoGlove friendly touch-screen with left hand controls 4.8" W x 3.9" H x 1.6" DIncludes motorcycle mount, automative suction-cup mount with integrated speaker, dashboard disk, carrying case, AC charger, vehicle power cable, security screwdriver, custom caps and Garmin® stickersMSRP $1076.91 http://www.bikeeffects.com/proddetail.asp?prod=CAB-66 http://www.bikeeffects.com/proddetail.asp?prod=CAB-66 http://www.bikeeffects.com/prodimages/cab-55s.jpg READ THE NOTE BELOW BEFORE ORDERING THIS CABLE!  This Garmin zumo™ 450/550/660 Interface Cable has a 2.5mm and a 3.5mm jack and connects to Starcom via the standard 3.5mm plug. It allows music, navigation commands and cell phone input to the Starcom1. NOTE: This cable is NOT a Stereo music cable, but plays in both ears. If you want true Stereo from your Garmin zumo™ , you need a MIC-02 cable and a MUS-04 cable instead of this cable. Call for additional details. http://www.bikeeffects.com/proddetail.asp?prod=PPC-020-12R http://www.bikeeffects.com/proddetail.asp?prod=PPC-020-12R Garmin zūmo™  Power Cable - 12" - Right Angle Plug. Plugs into Powerlet socket to power your zūmo™. http://www.bikeeffects.com/proddetail.asp?prod=08-0253J http://www.bikeeffects.com/proddetail.asp?prod=08-0253J http://www.bikeeffects.com/prodimages/08-0253Js.jpg Allows the OptiMate III charger to connect to existing battery leads from other popular brands of chargers such as Battery Tender. http://www.bikeeffects.com/proddetail.asp?prod=2700150 http://www.bikeeffects.com/proddetail.asp?prod=2700150 http://www.bikeeffects.com/prodimages/2700150s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700160 http://www.bikeeffects.com/proddetail.asp?prod=2700160 http://www.bikeeffects.com/prodimages/2700160s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700140 http://www.bikeeffects.com/proddetail.asp?prod=2700140 http://www.bikeeffects.com/prodimages/2700140s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700180 http://www.bikeeffects.com/proddetail.asp?prod=2700180 http://www.bikeeffects.com/prodimages/2700180s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700170 http://www.bikeeffects.com/proddetail.asp?prod=2700170 http://www.bikeeffects.com/prodimages/2700170s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700110 http://www.bikeeffects.com/proddetail.asp?prod=2700110 http://www.bikeeffects.com/prodimages/2700110s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700120 http://www.bikeeffects.com/proddetail.asp?prod=2700120 http://www.bikeeffects.com/prodimages/2700120s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700100 http://www.bikeeffects.com/proddetail.asp?prod=2700100 http://www.bikeeffects.com/prodimages/2700100s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700210 http://www.bikeeffects.com/proddetail.asp?prod=2700210 http://www.bikeeffects.com/prodimages/2700210s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700200 http://www.bikeeffects.com/proddetail.asp?prod=2700200 http://www.bikeeffects.com/prodimages/2700200s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700240 http://www.bikeeffects.com/proddetail.asp?prod=2700240 http://www.bikeeffects.com/prodimages/2700240s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700250 http://www.bikeeffects.com/proddetail.asp?prod=2700250 http://www.bikeeffects.com/prodimages/2700250s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2700230 http://www.bikeeffects.com/proddetail.asp?prod=2700230 http://www.bikeeffects.com/prodimages/2700230s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600250 http://www.bikeeffects.com/proddetail.asp?prod=2600250 http://www.bikeeffects.com/prodimages/2600250s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600230 http://www.bikeeffects.com/proddetail.asp?prod=2600230 http://www.bikeeffects.com/prodimages/2600230s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600220 http://www.bikeeffects.com/proddetail.asp?prod=2600220 http://www.bikeeffects.com/prodimages/2600220s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600240 http://www.bikeeffects.com/proddetail.asp?prod=2600240 http://www.bikeeffects.com/prodimages/2600240s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600270 http://www.bikeeffects.com/proddetail.asp?prod=2600270 http://www.bikeeffects.com/prodimages/2600270s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600290 http://www.bikeeffects.com/proddetail.asp?prod=2600290 http://www.bikeeffects.com/prodimages/2600290s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600260 http://www.bikeeffects.com/proddetail.asp?prod=2600260 http://www.bikeeffects.com/prodimages/2600260s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600280 http://www.bikeeffects.com/proddetail.asp?prod=2600280 http://www.bikeeffects.com/prodimages/2600280s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600390 http://www.bikeeffects.com/proddetail.asp?prod=2600390 http://www.bikeeffects.com/prodimages/2600390s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600410 http://www.bikeeffects.com/proddetail.asp?prod=2600410 http://www.bikeeffects.com/prodimages/2600410s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600380 http://www.bikeeffects.com/proddetail.asp?prod=2600380 http://www.bikeeffects.com/prodimages/2600380s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2600400 http://www.bikeeffects.com/proddetail.asp?prod=2600400 http://www.bikeeffects.com/prodimages/2600400s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500140 http://www.bikeeffects.com/proddetail.asp?prod=2500140 http://www.bikeeffects.com/prodimages/2500140s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500160 http://www.bikeeffects.com/proddetail.asp?prod=2500160 http://www.bikeeffects.com/prodimages/2500160s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500150 http://www.bikeeffects.com/proddetail.asp?prod=2500150 http://www.bikeeffects.com/prodimages/2500150s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500100 http://www.bikeeffects.com/proddetail.asp?prod=2500100 http://www.bikeeffects.com/prodimages/2500100s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500110 http://www.bikeeffects.com/proddetail.asp?prod=2500110 http://www.bikeeffects.com/prodimages/2500110s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500130 http://www.bikeeffects.com/proddetail.asp?prod=2500130 http://www.bikeeffects.com/prodimages/2500130s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500120 http://www.bikeeffects.com/proddetail.asp?prod=2500120 http://www.bikeeffects.com/prodimages/2500120s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500420 http://www.bikeeffects.com/proddetail.asp?prod=2500420 http://www.bikeeffects.com/prodimages/2500420s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500430 http://www.bikeeffects.com/proddetail.asp?prod=2500430 http://www.bikeeffects.com/prodimages/2500430s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500450 http://www.bikeeffects.com/proddetail.asp?prod=2500450 http://www.bikeeffects.com/prodimages/2500450s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500440 http://www.bikeeffects.com/proddetail.asp?prod=2500440 http://www.bikeeffects.com/prodimages/2500440s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500340 http://www.bikeeffects.com/proddetail.asp?prod=2500340 http://www.bikeeffects.com/prodimages/2500340s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500350 http://www.bikeeffects.com/proddetail.asp?prod=2500350 http://www.bikeeffects.com/prodimages/2500350s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500370 http://www.bikeeffects.com/proddetail.asp?prod=2500370 http://www.bikeeffects.com/prodimages/2500370s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500220 http://www.bikeeffects.com/proddetail.asp?prod=2500220 http://www.bikeeffects.com/prodimages/2500220s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500230 http://www.bikeeffects.com/proddetail.asp?prod=2500230 http://www.bikeeffects.com/prodimages/2500230s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500250 http://www.bikeeffects.com/proddetail.asp?prod=2500250 http://www.bikeeffects.com/prodimages/2500250s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2500240 http://www.bikeeffects.com/proddetail.asp?prod=2500240 http://www.bikeeffects.com/prodimages/2500240s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach Face, and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2800160 http://www.bikeeffects.com/proddetail.asp?prod=2800160 http://www.bikeeffects.com/prodimages/2800160s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=2800180 http://www.bikeeffects.com/proddetail.asp?prod=2800180 http://www.bikeeffects.com/prodimages/2800180s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. Click Here to view or print the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=2800170 http://www.bikeeffects.com/proddetail.asp?prod=2800170 http://www.bikeeffects.com/prodimages/2800170s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. Click Here to view or print the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=2800150 http://www.bikeeffects.com/proddetail.asp?prod=2800150 http://www.bikeeffects.com/prodimages/2800150s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. Click Here to view or print the Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=2800130 http://www.bikeeffects.com/proddetail.asp?prod=2800130 http://www.bikeeffects.com/prodimages/2800130s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. Click Here to view or printthe Installation Guide. http://www.bikeeffects.com/proddetail.asp?prod=2800110 http://www.bikeeffects.com/proddetail.asp?prod=2800110 http://www.bikeeffects.com/prodimages/2800110s.jpg Made of Lexan,these colored face plates are a replacement for the stock Tach and Speedometer Faces and they come with custom graphics. http://www.bikeeffects.com/proddetail.asp?prod=PPC-005 http://www.bikeeffects.com/proddetail.asp?prod=PPC-005 http://www.bikeeffects.com/prodimages/ppc005s.jpg Connect your Gerbings vest (coaxial connector type) to our Powerlet deluxe plug. Great value and durability. http://www.bikeeffects.com/proddetail.asp?prod=MUS-06 http://www.bikeeffects.com/proddetail.asp?prod=MUS-06 Goldwing Audio Interface Cable has 3.5mm stereo plug on one end and 5pin DIN plug on the other.This cable is used for the Goldwing rider whohas a Starcom installed and wants to be able to listen to his on boardHonda Audio System through the Starcom. http://www.bikeeffects.com/proddetail.asp?prod=GH-014 http://www.bikeeffects.com/proddetail.asp?prod=GH-014 http://www.bikeeffects.com/prodimages/gh-016s.jpg Use this full face helmet set with your Goldwing intercom system. It has an inline mobile phone and navigation/radar interface that allows you to plug in a cellular phone (with an appropriate interface cable), a Bluetooth adapter for cell phone and your GPS navigation unit as well as a radar detector. Use a GH-004 helmet set for your passenger as a companion to this set. Open face model shown. http://www.bikeeffects.com/proddetail.asp?prod=GH-016 http://www.bikeeffects.com/proddetail.asp?prod=GH-016 http://www.bikeeffects.com/prodimages/gh-016s.jpg Use this open face helmet set with your Goldwing intercom system. It has an inline mobile phone and navigation/radar interface that allows you to plug in a cellular phone (with an appropriate interface cable), a Bluetooth adapter for cell phone and your GPS navigation unit as well as a radar detector. Use a GH-006 helmet set for your passenger as a companion to this set. http://www.bikeeffects.com/proddetail.asp?prod=BRFB http://www.bikeeffects.com/proddetail.asp?prod=BRFB http://www.bikeeffects.com/prodimages/brfbs.jpg GP Folding Brake Lever for Radial Brakes. Standard Length, Gray only. http://www.bikeeffects.com/proddetail.asp?prod=Tom_Lisle_R6 http://www.bikeeffects.com/proddetail.asp?prod=Tom_Lisle_R6 http://www.bikeeffects.com/prodimages/small/Tom_Lisle_R6-1.jpg They don't get nicer than this one! http://www.bikeeffects.com/proddetail.asp?prod=3100200 http://www.bikeeffects.com/proddetail.asp?prod=3100200 http://www.bikeeffects.com/prodimages/3100200s.jpg Green trim for Flushmounts with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=GSX-R_1000_Undertail http://www.bikeeffects.com/proddetail.asp?prod=GSX-R_1000_Undertail http://www.bikeeffects.com/prodimages/GSX-R1000_03-04_Undertails.jpg GSX-R 1000 Undertail by Mototeck. http://www.bikeeffects.com/proddetail.asp?prod=Hayabusa-1 http://www.bikeeffects.com/proddetail.asp?prod=Hayabusa-1 http://www.bikeeffects.com/prodimages/busa-07s.jpg http://www.bikeeffects.com/proddetail.asp?prod=Hayabusa-2 http://www.bikeeffects.com/proddetail.asp?prod=Hayabusa-2 http://www.bikeeffects.com/prodimages/busa-08s.jpg http://www.bikeeffects.com/proddetail.asp?prod=GSX-R600/750-01 http://www.bikeeffects.com/proddetail.asp?prod=GSX-R600/750-01 http://www.bikeeffects.com/prodimages/gsx-r600-1s.jpg New CAD designed ABS Undertail from Mototeck. http://www.bikeeffects.com/proddetail.asp?prod=GSX-R600/750-02 http://www.bikeeffects.com/proddetail.asp?prod=GSX-R600/750-02 http://www.bikeeffects.com/prodimages/gsx-r600-2s.jpg New CAD designed GSX-R600 & GSX-R Undertail from Mototeck http://www.bikeeffects.com/proddetail.asp?prod=GSX-R600/750-03 http://www.bikeeffects.com/proddetail.asp?prod=GSX-R600/750-03 http://www.bikeeffects.com/prodimages/gsx-r600-5s.jpg New CAD designed GSX-R600 & GSX-R Undertail from Mototeck. http://www.bikeeffects.com/proddetail.asp?prod=010-00423-02 http://www.bikeeffects.com/proddetail.asp?prod=010-00423-02 http://www.bikeeffects.com/prodimages/gxm30s.jpg The compact, all-in-one GXM 30 delivers XM Satellite weather, traffic and radioto your compatible Garmin unit. With the GXM 30 and a subscription to XMservices, you can check the weather, avoid traffic backups or listen to theradio when you travel with your unit.MSRP $267.84 http://www.bikeeffects.com/proddetail.asp?prod=H.A.R.D. http://www.bikeeffects.com/proddetail.asp?prod=H.A.R.D. http://www.bikeeffects.com/prodimages/hard_systems.jpg Helmet Assisted Radar Detection, H.A.R.D., is a wireless system for motorcyclists needing to know when their radar detector is alerting them of a radar threat. The H.A.R.D. System provides an immediate visual alert: a flashing LED light inside the helmet illuminated within your field of vision allowing immediate recognition of a radar threat. Compatable with Valentine One, Escort 8500 X50, 8500, 7500S, 7500, 6800, Solo S2 (Power Cord option required) and Beltronics RX65, RX55, and V995. Click Here to view or print the Installation Guide orClick Here to see the H.A.R.D. Faqs and installed product pictures. MSRP $160.00 http://www.bikeeffects.com/proddetail.asp?prod=3-30912C http://www.bikeeffects.com/proddetail.asp?prod=3-30912C http://www.bikeeffects.com/prodimages/small/3-30912C-1.jpg This is the 3rd generation mounting system from Techmounts. They combined all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fitvirtuallyevery motorcycle with tubular handlebars. Requires only ¾” ofhandlebarspace and can be mounted at any angle. Having no need for a shaft, makes this mount system verystrong and verycompact. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. Top: 2.25" round with AMPs pattern Mount Style:Handlebar mount - 7/8" through 1 1/4" Shaft Length: 1.75" Shaft Style: Pivot Height: .75" minimum and 2.5" maximum from handlebars Colors: Chrome http://www.bikeeffects.com/proddetail.asp?prod=4-30912C http://www.bikeeffects.com/proddetail.asp?prod=4-30912C http://www.bikeeffects.com/prodimages/small/4-30912C-1.jpg Kit includes 3 reducer bushings, tools and instructions. Use for: GPS Radar Detectors Toll Transponder Cell Phones Radios Camera Change Holder Garage Door Opener PDA's Chrome only. http://www.bikeeffects.com/proddetail.asp?prod=3-30912 http://www.bikeeffects.com/proddetail.asp?prod=3-30912 http://www.bikeeffects.com/prodimages/small/3-30912-1.jpg This is the 3rd generation mounting system from Techmounts. Theycombined all of the current production handlebar sizes from 7/8” (22mm)up to 1 ¼” (32mm) into one mount system. This allows it to fit virtuallyevery motorcycle with tubular handlebars. Requires only ¾” of handlebarspace and can be mounted at any angle. Available in Black or Silver.Having no need for a shaft, makes this mount system very strong and verycompact. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. Top: 2.25" round with AMPs pattern Mount Style:Handlebar mount - 7/8" through 1 1/4" Shaft Length: 1.75" Shaft Style: Pivot Height: .75" minimum and 2.5" maximum from handlebars Colors: Black or Silver http://www.bikeeffects.com/proddetail.asp?prod=VOL-02 http://www.bikeeffects.com/proddetail.asp?prod=VOL-02 http://www.bikeeffects.com/prodimages/vol-01s.jpg Remote volume control for Starcom1 Advance and Digital. Does not work with the original Starcom1 system. http://www.bikeeffects.com/proddetail.asp?prod=3-31002C http://www.bikeeffects.com/proddetail.asp?prod=3-31002C http://www.bikeeffects.com/prodimages/small/3-31002C-1.jpg Harley mirror mounts take advantage of the unused mirror hole found on many Harley-Davidson touring motorcycles. Note: Mounting Garmin zumo® 660 requires P/N 60007 zumo® Top Plate. http://www.bikeeffects.com/proddetail.asp?prod=HSEX-05 http://www.bikeeffects.com/proddetail.asp?prod=HSEX-05 http://www.bikeeffects.com/prodimages/hsex-04-05s.jpg The HSEX-05 headset extension cable is a 2' cable that connects to the StarCom1 headset input to a waterproof bulkhead fitting socket. It can be fitted to any convenient and available body panel or the fitting bracket BKT-01. Once fitted the helmet kit can easily and quickly be connected when required, simply flip the weatherproof lid and plug in the coiled helmet extension lead. http://www.bikeeffects.com/proddetail.asp?prod=HSEX-04 http://www.bikeeffects.com/proddetail.asp?prod=HSEX-04 http://www.bikeeffects.com/prodimages/hsex-04-05s.jpg The HSEX-04 headset extension cable is a 6' cable that connects to the StarCom1 headset input to a waterproof bulkhead fitting socket. It can be fitted to any convenient and available body panel or the fitting bracket BKT-01. Once fitted the helmet kit can easily and quickly be connected when required, simply flip the weatherproof lid and plug in the coiled helmet extension lead. http://www.bikeeffects.com/proddetail.asp?prod=HSEX-01 http://www.bikeeffects.com/proddetail.asp?prod=HSEX-01 http://www.bikeeffects.com/prodimages/hsex-01s.jpg Head Set extension cable. 1.5m/4 ft coiled cable. This cable is included with all helmet headsets. http://www.bikeeffects.com/proddetail.asp?prod=HSEX-02 http://www.bikeeffects.com/proddetail.asp?prod=HSEX-02 http://www.bikeeffects.com/prodimages/hsex-02s.jpg Headset/Radio extension cable. 60cm/2 ft straight cable. http://www.bikeeffects.com/proddetail.asp?prod=HSEX-03 http://www.bikeeffects.com/proddetail.asp?prod=HSEX-03 http://www.bikeeffects.com/prodimages/hsex-02s.jpg Headset/Radio extension cable. 2Meter/6 ft straight cable. http://www.bikeeffects.com/proddetail.asp?prod=MTHH http://www.bikeeffects.com/proddetail.asp?prod=MTHH http://www.bikeeffects.com/prodimages/uhh-2s.jpg The Condor Universal Helmet Hangar works with all types of helmets. It is designed to be hard mounted against a flat surface using the holes provided at the top. Perfect for helmet storage and airing out of the helmet, this product is made from 1/8" hot rolled steel, ee-coated and rubber stripped for optimum helmet protection. http://www.bikeeffects.com/proddetail.asp?prod=UHH http://www.bikeeffects.com/proddetail.asp?prod=UHH http://www.bikeeffects.com/prodimages/uhh-1-2s.jpg The Condor Universal Helmet Hangar works with all types of helmets. It can be hung on doors, clothes rods, towel racks etc. It can also be hard mounted using the holes provided at the top. Perfect for helmet storage and airing out of the helmet, this product is made from 1/8" hot rolled steel, ee-coated and rubber stripped for optimum helmet protection. http://www.bikeeffects.com/proddetail.asp?prod=PP-04S http://www.bikeeffects.com/proddetail.asp?prod=PP-04S http://www.bikeeffects.com/prodimages/pp-04s.jpg Full Face Helmet set with 3.5mm jack socket for use with the SH-550S zumo® cable. It allows connection with Starcom PP-10 Plug-Phones or other headsets. This helmet set is intended for use with the SH-550S only and will not work with any Starcom communication system. http://www.bikeeffects.com/proddetail.asp?prod=PP-24 http://www.bikeeffects.com/proddetail.asp?prod=PP-24 Helmet Set, Full Face w/speakers and 3.5mm jack. You can use the speakers or plug in earbuds, such as he PP-10's. Comes with an HSEX-01 cable. http://www.bikeeffects.com/proddetail.asp?prod=PP-04 http://www.bikeeffects.com/proddetail.asp?prod=PP-04 http://www.bikeeffects.com/prodimages/pp-04s.jpg Helmet set for StarCom1 for Full Face helmets with 3.5mm jack socket for Starcom PP-10 Plug-Phones or other headsets. Includes one HSEX-01, Starcom to headset coiled cable. http://www.bikeeffects.com/proddetail.asp?prod=PP-06S http://www.bikeeffects.com/proddetail.asp?prod=PP-06S http://www.bikeeffects.com/prodimages/pp-06s.jpg Open Face Helmet set with 3.5mm jack socket for use with the SH-550S zumo® cable. It allows connection with Starcom PP-10 Plug-Phones or other headsets. This helmet set is intended for use with the SH-550S only and will not work with any Starcom communication system. http://www.bikeeffects.com/proddetail.asp?prod=PP-26 http://www.bikeeffects.com/proddetail.asp?prod=PP-26 Helmet Set, Open Face w/speakers and 3.5mm jack. You can use the speakers or plug in earbuds, such as he PP-10's. Comes with an HSEX-01 cable. http://www.bikeeffects.com/proddetail.asp?prod=PP-06 http://www.bikeeffects.com/proddetail.asp?prod=PP-06 http://www.bikeeffects.com/prodimages/pp-06s.jpg Helmet set for Starcom1 for Open Face helmets with 3.5mm jack socket for Starcom PP-10 Plug-Phones or other headsets. Includes one HSEX-01, Starcom to headset coiled cable. http://www.bikeeffects.com/proddetail.asp?prod=SH-550-4 http://www.bikeeffects.com/proddetail.asp?prod=SH-550-4 This helmet set consists of 1 SH-004 Starcom Helmet Headset and on coil cable with 2 male plugs for the zumo™ on one end and one female plug on the other to attach the SH-004 headset. http://www.bikeeffects.com/proddetail.asp?prod=SH-550-6 http://www.bikeeffects.com/proddetail.asp?prod=SH-550-6 This helmet set consists of 1 SH-006 Starcom Helmet Headset and on coil cable with 2 male plugs for the zumo™ on one end and one female plug on the other to attach the SH-006 headset. http://www.bikeeffects.com/proddetail.asp?prod=SP-004 http://www.bikeeffects.com/proddetail.asp?prod=SP-004 This kit includes 2 Mic foam Mic domes (Full face helmet), velcro mic and speaker attachment discs, 2 speaker covers, helmet cable anchors & misc hardware. http://www.bikeeffects.com/proddetail.asp?prod=SP-006 http://www.bikeeffects.com/proddetail.asp?prod=SP-006 This kit includes 3 Mic foam covers (2 large & 1 small for open face helmet), velcro mic and speaker attachment discs, 2 speaker covers, helmet cable anchors & misc hardware. http://www.bikeeffects.com/proddetail.asp?prod=PP-04G http://www.bikeeffects.com/proddetail.asp?prod=PP-04G http://www.bikeeffects.com/prodimages/pp-04s.jpg Full face helmet set with 3.5mm jack socket (no speakers) for use with the Goldwing intercom system. http://www.bikeeffects.com/proddetail.asp?prod=PP-24S http://www.bikeeffects.com/proddetail.asp?prod=PP-24S Full Face Helmet set with 3.5mm jack socket and speakers for use with the SH-550Szumo® cable. It allows connection with Starcom PP-10 Plug-Phones orother headsets. This helmet set is intended for use with the SH-550Sonly and will not work with any Starcom communication system. http://www.bikeeffects.com/proddetail.asp?prod=Honda_CBR929_Undertail http://www.bikeeffects.com/proddetail.asp?prod=Honda_CBR929_Undertail http://www.bikeeffects.com/prodimages/7104170lg_insts.jpg Mototeck Undertail for Honda CBR929 in Pearl Flash Yellow. On Sale for the month of October. http://www.bikeeffects.com/proddetail.asp?prod=GH-020 http://www.bikeeffects.com/proddetail.asp?prod=GH-020 http://www.bikeeffects.com/prodimages/small/GH-020-1.jpg The Starcom1 Goldwing Intercom Enhancement Module is easily added to the on board intercom system and provides for a number additional features which many Goldwing owners consider essential. It provides interfaces for the following equipment: Mobile Phone Satellite Navigation Systems or Radar Detectors Bike to Bike FRS/GMRS Radios MP3 or iPod music players The system can be used with Starcom GH Series helmet sets or the standard Goldwing helmet sets. http://www.bikeeffects.com/proddetail.asp?prod=GH-004 http://www.bikeeffects.com/proddetail.asp?prod=GH-004 Headset, full face for Honda Goldwing, Harley Davidson and Yamaha Entertainment Systems. Plugs directly into the Goldwing/Harley Davidson audio system 5 pin DIN socket. Speakers are the same as Starcom1 headsets. The microphone is a dynamic, noise canceling type. http://www.bikeeffects.com/proddetail.asp?prod=GH-006 http://www.bikeeffects.com/proddetail.asp?prod=GH-006 http://www.bikeeffects.com/prodimages/gh-006s.jpg Headset, open face for Honda Goldwing, Harley Davidson and Yamaha Entertainment Systems. Plugs directly into the Goldwing/Harley Davidson audio system 5 pin DIN socket. Speakers are the same as Starcom1 headsets. The boom mic is a dynamic, noise canceling mic utilizing  strong bend and stay construction with a flat rubber spade that is pushed behind the helmet lining to provide a sturdy fit. http://www.bikeeffects.com/proddetail.asp?prod=Honda_RC-51_Undertail http://www.bikeeffects.com/proddetail.asp?prod=Honda_RC-51_Undertail http://www.bikeeffects.com/prodimages/rc-51unds.jpg http://www.bikeeffects.com/proddetail.asp?prod=AHA00001-0000 http://www.bikeeffects.com/proddetail.asp?prod=AHA00001-0000 http://www.bikeeffects.com/prodimages/AHA00001-0000s.jpg This beautiful enclosure is the ultimate mounting system for your Garmin 2610, 2620, 2650, 2720 or 2730 GPS. Machined from an aluminum billet, this unit will house your Garmin unit securely, and without damage. It features a key lock to prevent theft. Retail price $393.51 http://www.bikeeffects.com/proddetail.asp?prod=AHA00001-0101 http://www.bikeeffects.com/proddetail.asp?prod=AHA00001-0101 http://www.bikeeffects.com/prodimages/AHA00001-0101s.jpg This beautiful enclosure is the ultimate mounting system for your Garmin 2610, 2620, 2650, 2720 or 2730 GPS. Machined from an aluminum billet, this unit will house your Garmin unit securely, and without damage. It features a key lock to prevent theft. Retail price $405.96 http://www.bikeeffects.com/proddetail.asp?prod=3100250 http://www.bikeeffects.com/proddetail.asp?prod=3100250 http://www.bikeeffects.com/prodimages/3100250s.jpg Housing, Base, Flushmounts made of ABS. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=PPC-012 http://www.bikeeffects.com/proddetail.asp?prod=PPC-012 http://www.bikeeffects.com/prodimages/ppc-012s.jpg Works with Apple iPOD and Nano music players. Cable mounted in-line regulatorassures the voltage is properly stepped down to operate your player. http://www.bikeeffects.com/proddetail.asp?prod=02-7301110 http://www.bikeeffects.com/proddetail.asp?prod=02-7301110 http://www.bikeeffects.com/prodimages/02-7301110s.jpg Another view of the new Dussault designed Mototeck Undertail for the ZX-10R. http://www.bikeeffects.com/proddetail.asp?prod=KawasakiZX-7RMini-Tail http://www.bikeeffects.com/proddetail.asp?prod=KawasakiZX-7RMini-Tail http://www.bikeeffects.com/prodimages/zx7-r-01s.jpg Mototeck Mini-tail designed by Dussault http://www.bikeeffects.com/proddetail.asp?prod=ZX-9R_Mini-Tail http://www.bikeeffects.com/proddetail.asp?prod=ZX-9R_Mini-Tail http://www.bikeeffects.com/prodimages/zx-9r-01s.jpg Mototeck Mini-tail designed by Robert Dussault. http://www.bikeeffects.com/proddetail.asp?prod=TK-3130 http://www.bikeeffects.com/proddetail.asp?prod=TK-3130 http://www.bikeeffects.com/prodimages/TK-3130cs.jpg The ProTalk XLS (TK-3130) is the latest member of the ProTalk family of on-site radios. This lightweight and compact radio has a number of innovative features and is ideal for use with the Starcom1 systems. All the features are menu driven and the lighted display gives the user status icons. The ProTalk XLS has 1-watt of power and has been programmed to use FRS/GMRS frequencies. The radio comes with a rapid rate drop-in charger, NiMH battery and spring loaded belt clip. ●High Capacity 1300mAh Battery ●Rapid Rate Desktop Charger ●HD Spring Action Belt Clip ●38 CTCSS Private Codes ●83 Digital Private Codes ●2-Year Factory Warranty ●Compact at Only 4.63" High ●Light Weight at Only 7oz ●Up to 15 Hours Talk Time ●1 Watt transmitter ●Vibration Incoming Signal Alert ●Six Incoming Call Alert Tones ●Voice Scramble Privacy Mode ●Key Lock / Backlit LCD Display ●LCD Battery Meter Display ●Low Battery Alert Tone ●Programmable Time-Out Timer ●Bi-Color Transmit / Busy LED ●Channel Up / Down Select ●Traditional Rotary Volume Knob ●Menu/Call/Monitor Keys ●Antenna Fixed Non-Removable ●Can Use Standard AA Alkaline ●Uses All ProTalk Accessories MSRP $190.00 http://www.bikeeffects.com/proddetail.asp?prod=TK-3200LU15 http://www.bikeeffects.com/proddetail.asp?prod=TK-3200LU15 http://www.bikeeffects.com/prodimages/tk3200s.jpg When you need a more powerful, rugged two-way radio, Kenwood's ProTalk 3200 is ideal. The ProTalk 3200 is a 2-watt FRS/GMRS (General Mobile Radio Service) radio with 15 channels. The first 7 channels of this radio are the same as the first 7 channels of a FRS radio. The ProTalk 3200 meets military standards for durability and features a rugged die-cast aluminum frame and polycarbonate case. This radio comes with a rechargeable battery, desktop charger and belt clip. This is the perfect companion to the Starcom1 systems. ● 2 Year Factory Warranty ● Includes Desktop Charger ● Includes SMA Type Antenna ● 15 Channels - 2 Watts of Power ● Meets MIL-STD 810 C-D-E● Rugged Die-Cast Construction ● Time-Out Timer Feature ● Battery Save Mode Feature ● Low Battery Indicator Warning ● Includes 1500mAh Battery ● Optional 2000mAh Battery ● Includes Belt Clip, Antenna ● Audio and Battery Accessories ● Only 4.8" High and 12.7 oz with standard battery MSRP $345.00 http://www.bikeeffects.com/proddetail.asp?prod=TK-3230XLS http://www.bikeeffects.com/proddetail.asp?prod=TK-3230XLS http://www.bikeeffects.com/prodimages/tk-3230s.jpg 1.5 Watts Transmitter Power 2,000 mAh Battery included Programmed with FRS/GMRS frequencies Enhanced Kenwood Audio 3 Levels Battery Indicator Battery Saver 2 year Warranty Comes with a 2.5 hour fast charger. http://www.bikeeffects.com/proddetail.asp?prod=5200340 http://www.bikeeffects.com/proddetail.asp?prod=5200340 http://www.bikeeffects.com/prodimages/5200340s.jpg New design LED light, ultra small with only one LED (Blue), Very bright little Blue LED for your bike. Sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=5200350 http://www.bikeeffects.com/proddetail.asp?prod=5200350 http://www.bikeeffects.com/prodimages/5200350s.jpg New design LED light, ultra small with only one LED (Green). Very bright little Green LEDs for your bike, sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=5200360 http://www.bikeeffects.com/proddetail.asp?prod=5200360 http://www.bikeeffects.com/prodimages/5200360s.jpg New design LED light, ultra small with only one LED (Red). Very bright little Red LED for your bike. Sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=5200370 http://www.bikeeffects.com/proddetail.asp?prod=5200370 http://www.bikeeffects.com/prodimages/5200370s.jpg New design LED light, ultra small with only one LED(White). Very bright little White LED for your bike. Sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=5200330 http://www.bikeeffects.com/proddetail.asp?prod=5200330 http://www.bikeeffects.com/prodimages/5200330s.jpg New design LED light, ultra small with only one LED (White) light. Very bright little White LED for your license plate. Sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=5200380 http://www.bikeeffects.com/proddetail.asp?prod=5200380 http://www.bikeeffects.com/prodimages/5200380s.jpg New design LED light, ultra small with only one LED(Yellow). Very bright little Yellow LED for your bike. Sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=5200191 http://www.bikeeffects.com/proddetail.asp?prod=5200191 http://www.bikeeffects.com/prodimages/5200191s.jpg New design LED board light , 6 LEDs, amber, designed for Mototeck Flushmounts and under tails, very bright. One board per package. These LEDs are not DOT approved. They can only be used as accessory lights. http://www.bikeeffects.com/proddetail.asp?prod=5200190 http://www.bikeeffects.com/proddetail.asp?prod=5200190 http://www.bikeeffects.com/prodimages/5200190s.jpg New design LED board light , 6 LEDs, amber, designed for Mototeck Flushmounts and under tails, very bright, sold in pairs.These LEDs are not DOT approved. They can only be used as accessory lights. http://www.bikeeffects.com/proddetail.asp?prod=5200200 http://www.bikeeffects.com/proddetail.asp?prod=5200200 http://www.bikeeffects.com/prodimages/5200200s.jpg New design LED board, 6 Amber LED's designed by Mototeck for Flushmounts and Undertails. Very bright. Has running light capability and turn signal light capability. Sold in single units. http://www.bikeeffects.com/proddetail.asp?prod=5200210 http://www.bikeeffects.com/proddetail.asp?prod=5200210 http://www.bikeeffects.com/prodimages/5200210s.jpg New design LED Board with 6 Amber LED's. Designed by Mototeck for Flushmounts and Undertails. Very bright. Has sequential running capability as well as turn signal capability. Sold in single units. http://www.bikeeffects.com/proddetail.asp?prod=5200250 http://www.bikeeffects.com/proddetail.asp?prod=5200250 http://www.bikeeffects.com/prodimages/5200250s.jpg New design LED Board light. 48 LEDs. Red. Round 1 7/8", 1157 connection. Designed to be very bright. Sold with pig tail 1157. Sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=5200290 http://www.bikeeffects.com/proddetail.asp?prod=5200290 http://www.bikeeffects.com/prodimages/5200290s.jpg New design LED Turn Signal Bulb for the Suzuki GSX-1300R Hayabusa. Has a cluster of 72 Amber LED's with a #1156 connector. These accessory lights are not DOT approved. Pkg of 2.Click Here to see our selection for Clear and Smoke Turn Signal lenses for the Hayabusa! Click Here to see this new product installed on a Hayabusa. http://www.bikeeffects.com/proddetail.asp?prod=5200180 http://www.bikeeffects.com/proddetail.asp?prod=5200180 http://www.bikeeffects.com/prodimages/5200180s.jpg LED Bulb, 1156 connection. 11 Amber LED's, designed very bright, for Suzuki, Kawasaki, Yamaha 1156. 1 1/2" by 1" & 46mm by 26mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200170 http://www.bikeeffects.com/proddetail.asp?prod=5200170 http://www.bikeeffects.com/prodimages/5200170s.jpg LED Bulb, 1156 connection. 11 Red LED's, designed very bright, for Suzuki, Kawasaki, Yamaha 1156,1 1/2" by 1" & 46mm by 26mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200150 http://www.bikeeffects.com/proddetail.asp?prod=5200150 http://www.bikeeffects.com/prodimages/5200150s.jpg LED Bulb #1157 connection. 11 Red LEDs, pulsating in low position and flashing LED in brake position. Designed to be very bright. For Suzuki, Kawasaki, Yamaha pig tail #1157, 1 1/2" by 1" & 46mm by 26mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200140 http://www.bikeeffects.com/proddetail.asp?prod=5200140 http://www.bikeeffects.com/prodimages/5200140s.jpg LED Bulb, #1157 connection, 11 Red LEDs rotated in low position and full bright on brake position. Designed to be very bright. For Suzuki, Kawasaki, Yamaha pig tail #1157, 1 1/2" by 1" & 46mm by 26mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200130 http://www.bikeeffects.com/proddetail.asp?prod=5200130 http://www.bikeeffects.com/prodimages/5200130s.jpg LED Bulb # 1157 Connection.11 Red LED's, designed very bright, for Suzuki, Kawasaki, Yamaha pig tail # 1157, 1 1/2" by 1" & 46mm by 26mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200100 http://www.bikeeffects.com/proddetail.asp?prod=5200100 http://www.bikeeffects.com/prodimages/5200100s.jpg LED Bulb, #194. 10 watts, Amber. 1 1/8" by 3/8" & 30mm by 10mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200110 http://www.bikeeffects.com/proddetail.asp?prod=5200110 http://www.bikeeffects.com/prodimages/5200110s.jpg LED bulb #194. 10 watts,Blue. 1 1/8" by 3/8" & 30mm by 10mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200120 http://www.bikeeffects.com/proddetail.asp?prod=5200120 http://www.bikeeffects.com/prodimages/5200120s.jpg LED BULB, #194. 10 watts, Red. 1 1/8" by 3/8" & 30mm by 10mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=5200160 http://www.bikeeffects.com/proddetail.asp?prod=5200160 http://www.bikeeffects.com/prodimages/5200160s.jpg LED Bulb, 7443 connection. 11 Red LED's, designed by Mototeck for the Honda customers. Very bright, for Honda pig tail 7443, this product is only sold by Mototeck world wide. 1 1/2" by 1" & 46mm by 26mm. (Pkg of 2) http://www.bikeeffects.com/proddetail.asp?prod=3100300 http://www.bikeeffects.com/proddetail.asp?prod=3100300 http://www.bikeeffects.com/prodimages/3100300s.jpg Flushmounts Lens, Amber (Elipse Design). Made of ABS.Pkg 0f 2. http://www.bikeeffects.com/proddetail.asp?prod=3100301 http://www.bikeeffects.com/proddetail.asp?prod=3100301 http://www.bikeeffects.com/prodimages/3100301s.jpg Flushmount lens Amber (Square Pattern) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100461 http://www.bikeeffects.com/proddetail.asp?prod=3100461 http://www.bikeeffects.com/prodimages/3100461s.jpg Flushmount Cat Eye lens. Amber (Square Design) made of ABS. Pkg. of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100310 http://www.bikeeffects.com/proddetail.asp?prod=3100310 http://www.bikeeffects.com/prodimages/3100310s.jpg Flushmount Lens, Blue (Elipse) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100311 http://www.bikeeffects.com/proddetail.asp?prod=3100311 http://www.bikeeffects.com/prodimages/3100311s.jpg Flushmount Lens, Blue (Square Pattern) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100290 http://www.bikeeffects.com/proddetail.asp?prod=3100290 http://www.bikeeffects.com/prodimages/3100290s.jpg Flushmount lens, clear (ellipse design). Made of ABS.Sold in pairs. Sold out. See Product  ID 3100291 as a alternate. http://www.bikeeffects.com/proddetail.asp?prod=3100451 http://www.bikeeffects.com/proddetail.asp?prod=3100451 http://www.bikeeffects.com/prodimages/3100451s.jpg Flushmount Cat Eye lens. Clear (Square Design) made of ABS. Pkg. of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100320 http://www.bikeeffects.com/proddetail.asp?prod=3100320 http://www.bikeeffects.com/prodimages/3100320s.jpg Flushmount Lens, Red (Elipse) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100321 http://www.bikeeffects.com/proddetail.asp?prod=3100321 http://www.bikeeffects.com/prodimages/3100321s.jpg Flushmount Lens, Red (Square Pattern) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100330 http://www.bikeeffects.com/proddetail.asp?prod=3100330 http://www.bikeeffects.com/prodimages/3100330s.jpg Flushmount lens, smoke (elipse design) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100331 http://www.bikeeffects.com/proddetail.asp?prod=3100331 http://www.bikeeffects.com/prodimages/3100331s.jpg Flushmount lens, smoke (square pattern) Made of ABS. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=3100291 http://www.bikeeffects.com/proddetail.asp?prod=3100291 http://www.bikeeffects.com/prodimages/3100291s.jpg Flushmount lens, Clear (Square design). Made of ABS.Sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=7939 http://www.bikeeffects.com/proddetail.asp?prod=7939 http://www.bikeeffects.com/prodimages/7939s.jpg This EVO II System features dual silencers with Conical end caps. Available in aluminum or carbon fiber canisters. http://www.bikeeffects.com/proddetail.asp?prod=6998 http://www.bikeeffects.com/proddetail.asp?prod=6998 http://www.bikeeffects.com/prodimages/6998s.jpg This beautifully engineered system for the Yamaha 04-05 R1 comes complete with a new "Y" pipe and does away with the stock catalytic converter for enhanced perfomance, reduced heat and weight. Choose from either Titanium or Carbon Fiber cans. Click Here to hear how this exhaust sounds on the R1. Click Here to view the power measurements on an R1 equiped with this system. http://www.bikeeffects.com/proddetail.asp?prod=6265 http://www.bikeeffects.com/proddetail.asp?prod=6265 http://www.bikeeffects.com/prodimages/6265s.jpg This high mount Leo Vince slip-on features stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6057 http://www.bikeeffects.com/proddetail.asp?prod=6057 http://www.bikeeffects.com/prodimages/6057s.jpg This high mount Leo Vince slip-on features stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6845 http://www.bikeeffects.com/proddetail.asp?prod=6845 http://www.bikeeffects.com/prodimages/6845s.jpg These Leo Vince high mount slip-ons feature stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, these slip-ons will surprise you with the power gain and weight savings. Carbon canisters shown no longer available. http://www.bikeeffects.com/proddetail.asp?prod=7587 http://www.bikeeffects.com/proddetail.asp?prod=7587 http://www.bikeeffects.com/prodimages/7587s.jpg Leo Vince SBK slip-on exhaust for the F650GS provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings. Includes Optional Quiet Insert that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=7251 http://www.bikeeffects.com/proddetail.asp?prod=7251 http://www.bikeeffects.com/prodimages/7248s.jpg This Leo Vince slip-on features stainless steel construction with a choice of an aluminum, titanium or carbon fiber canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. Includes Optional Quiet Insert that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=7192 http://www.bikeeffects.com/proddetail.asp?prod=7192 http://www.bikeeffects.com/prodimages/7192s.jpg These Leo Vince slip-ons feature stainless steel construction with a choice of aluminum, titanium or carbon fiber canisters and have a ceramic based packing material. Made in Italy, almost entirely by hand, these slip-ons will surprise you with the power gain and weight savings. This system is European "E" approved for noise requirements. The rear baffle can be removed if desired for a louder exhaust note. Click Here to hear how this exhaust sounds on an FJR1300. Yamaha exhaust seals for the connector pipe not required. Please call for availability before ordering. http://www.bikeeffects.com/proddetail.asp?prod=7502 http://www.bikeeffects.com/proddetail.asp?prod=7502 http://www.bikeeffects.com/prodimages/7503s.jpg This Leo Vince slip-on features stainless steel construction with a choice of an aluminum, titanium or carbon fiber canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. Click Here to hear how this exhaust sounds on the new GSX-R1000. http://www.bikeeffects.com/proddetail.asp?prod=7124 http://www.bikeeffects.com/proddetail.asp?prod=7124 http://www.bikeeffects.com/prodimages/7125s.jpg This Leo Vince slip-on features stainless steel construction with a choice of an aluminum, titanium or carbon fiber canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=7117 http://www.bikeeffects.com/proddetail.asp?prod=7117 http://www.bikeeffects.com/prodimages/7117s.jpg This Leo Vince slip-on features stainless steel construction with a choice of an aluminum, titanium or carbon fiber canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6431 http://www.bikeeffects.com/proddetail.asp?prod=6431 http://www.bikeeffects.com/prodimages/6431s.jpg This Leo Vince slip-on features stainless steel construction with a choice of an aluminum, titanium or carbon fiber canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=5760 http://www.bikeeffects.com/proddetail.asp?prod=5760 http://www.bikeeffects.com/prodimages/5760s.jpg This Leo Vince slip-on features stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. Note: Carbon canister shown not available in the US for this model. http://www.bikeeffects.com/proddetail.asp?prod=5407 http://www.bikeeffects.com/proddetail.asp?prod=5407 http://www.bikeeffects.com/prodimages/5407s.jpg This Leo Vince slip-on features stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, this slip-on will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6474 http://www.bikeeffects.com/proddetail.asp?prod=6474 http://www.bikeeffects.com/prodimages/6066s.jpg These Leo Vince slip-ons feature stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, these slip-ons will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6842 http://www.bikeeffects.com/proddetail.asp?prod=6842 http://www.bikeeffects.com/prodimages/6842s.jpg These Leo Vince slip-ons feature stainless steel construction with an aluminum canister. Made in Italy, almost entirely by hand, these slip-ons will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6492 http://www.bikeeffects.com/proddetail.asp?prod=6492 http://www.bikeeffects.com/prodimages/6492s.jpg These Leo Vince slip-ons feature stainless steel construction with a choice of aluminum, titanium or carbon fiber canisters. Made in Italy, almost entirely by hand, these slip-ons will surprise you with the power gain and weight savings, which for the Z1000, is nearly 15 pounds! http://www.bikeeffects.com/proddetail.asp?prod=7256 http://www.bikeeffects.com/proddetail.asp?prod=7256 http://www.bikeeffects.com/prodimages/7256s.jpg Leo Vince SBK slip-on exhaust for the KTM 950/990 Adventure provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings.  Includes Optional Quiet Inserts that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=7538 http://www.bikeeffects.com/proddetail.asp?prod=7538 http://www.bikeeffects.com/prodimages/7538s.jpg Leo Vince SBK slip-on exhaust for the Super Duke provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings. Choose between Aluminum, Carbon Fiber or Titanium canisters.  Includes Optional Quiet Inserts that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=5864 http://www.bikeeffects.com/proddetail.asp?prod=5864 http://www.bikeeffects.com/prodimages/5864s.jpg These Leo Vince slip-ons feature stainless steel construction with aluminum canisters. Made in Italy, almost entirely by hand, these slip-ons will surprise you with the power gain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=6337 http://www.bikeeffects.com/proddetail.asp?prod=6337 http://www.bikeeffects.com/prodimages/6337s.jpg Leo Vince SBK slip-on exhaust for the R1150GS provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings. Canisters are available in Aluminum, carbon fiber or titanium. Includes Optional Quiet Insert that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=7554C http://www.bikeeffects.com/proddetail.asp?prod=7554C http://www.bikeeffects.com/prodimages/7554cs.jpg Leo Vince SBK Factory EVO II slip-on exhaust for the K1200GT provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings. Canisters are available in carbon fiber and titanium with carbon fiber end caps. Includes Optional Quiet Insert that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=7698C http://www.bikeeffects.com/proddetail.asp?prod=7698C http://www.bikeeffects.com/prodimages/7698cs.jpg Leo Vince SBK Factory EVO II slip-on exhaust for the R1200GS provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings. Canisters are available in carbon fiber and titanium with carbon fiber end caps. Includes Optional Quiet Insert that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=7690C http://www.bikeeffects.com/proddetail.asp?prod=7690C http://www.bikeeffects.com/prodimages/7690cs.jpg Leo Vince SBK Factory EVO II slip-on exhaust for the R1200GS provides significant weight savings, increased horsepower and are designed to run at peak efficiency with stock fuel injection settings. Canisters are available in carbon fiber and titanium with carbon fiber end caps. Includes Optional Quiet Insert that can be removed. http://www.bikeeffects.com/proddetail.asp?prod=8123 http://www.bikeeffects.com/proddetail.asp?prod=8123 http://www.bikeeffects.com/prodimages/small/8123-1.jpg These Leo Vince slip-ons feature stainless steel construction with acarbon fiber canister and a conical carbon fiber end cap. Made in Italy,almost entirely by hand, this slip-on will surprise you with the powergain and weight savings. http://www.bikeeffects.com/proddetail.asp?prod=5400120 http://www.bikeeffects.com/proddetail.asp?prod=5400120 http://www.bikeeffects.com/prodimages/5400120s.jpg New ultra light design License Plate Bracket, made of Blue ABS plastic to support your license plate on your Undertail or under the rear panel of your bike, 5 plastic rivets included. http://www.bikeeffects.com/proddetail.asp?prod=5400110 http://www.bikeeffects.com/proddetail.asp?prod=5400110 http://www.bikeeffects.com/prodimages/5400110s.jpg New ultra light design License Plate Bracket, made of Clear ABS plastic to support your license plate on your Undertail or under the rear panel of your bike. Hardware included. http://www.bikeeffects.com/proddetail.asp?prod=5400130 http://www.bikeeffects.com/proddetail.asp?prod=5400130 http://www.bikeeffects.com/prodimages/5400130s.jpg New ultra light design License Plate Bracket, made of Red ABS plastic to support your license plate on your Undertail or under the rear panel of your bike, 5 plastic rivets included. http://www.bikeeffects.com/proddetail.asp?prod=5400100 http://www.bikeeffects.com/proddetail.asp?prod=5400100 http://www.bikeeffects.com/prodimages/5400100s.jpg New ultra light design License Plate Bracket, made of stainless steel to support your license plate on your Undertail or under the rear panel of your bike, 5 plastic rivets included. http://www.bikeeffects.com/proddetail.asp?prod=LPF-8RZ-B http://www.bikeeffects.com/proddetail.asp?prod=LPF-8RZ-B http://www.bikeeffects.com/prodimages/8202-52s.jpg Powder coated Black License plate holder with full spectrum white LED lighting to Illuminate your license plate. Fits standard license plates and comes with mounting hardware. http://www.bikeeffects.com/proddetail.asp?prod=LPF-8RZ-C http://www.bikeeffects.com/proddetail.asp?prod=LPF-8RZ-C http://www.bikeeffects.com/prodimages/8201-52s.jpg Chrome finish License plate holder with full spectrum white LED lighting to Illuminate your license plate. Fits standard license plates and comes with mounting hardware. http://www.bikeeffects.com/proddetail.asp?prod=5401000 http://www.bikeeffects.com/proddetail.asp?prod=5401000 http://www.bikeeffects.com/prodimages/5401000s.jpg New light weight license plate bracket made of 18 gauge brushed stainless steel. Can be mounted on the undertail or under the rear panel. 2 pieces and fasteners. http://www.bikeeffects.com/proddetail.asp?prod=3-50125 http://www.bikeeffects.com/proddetail.asp?prod=3-50125 http://www.bikeeffects.com/prodimages/3-50125.jpg Set of two (2) clamps with reducer bushing to mount accessory lightsonto 1 1/4 thru 7/8" round tubing. Choose from black or silver. http://www.bikeeffects.com/proddetail.asp?prod=9007-03 http://www.bikeeffects.com/proddetail.asp?prod=9007-03 Scotts Link Arm Puller http://www.bikeeffects.com/proddetail.asp?prod=LKM-4031-45 http://www.bikeeffects.com/proddetail.asp?prod=LKM-4031-45 Link Arm, Flat +5mm http://www.bikeeffects.com/proddetail.asp?prod=KNB-46L http://www.bikeeffects.com/proddetail.asp?prod=KNB-46L http://www.bikeeffects.com/prodimages/knb-46ls.jpg Lithium Battery for battery pack for the TK-3230 ProTalk Radio. http://www.bikeeffects.com/proddetail.asp?prod=5600200 http://www.bikeeffects.com/proddetail.asp?prod=5600200 http://www.bikeeffects.com/prodimages/5600200s.jpg For the rear suspension, this unit, made of stainless steel, has two positions. One inch lower and two inches lower than stock. http://www.bikeeffects.com/proddetail.asp?prod=5600100 http://www.bikeeffects.com/proddetail.asp?prod=5600100 http://www.bikeeffects.com/prodimages/5600100s.jpg http://www.bikeeffects.com/proddetail.asp?prod=21-0016 http://www.bikeeffects.com/proddetail.asp?prod=21-0016 http://www.bikeeffects.com/prodimages/21-0016s.jpg Holds virtually any metal object Great for starting or removing fasteners in hard to reach places 2-way stretch spandex Leatherette bottom and finger tip Stretch finger panels http://www.bikeeffects.com/proddetail.asp?prod=08-0156 http://www.bikeeffects.com/proddetail.asp?prod=08-0156 http://www.bikeeffects.com/prodimages/08-0156s.jpg • All-purpose magnetic dish is ideal for keeping track of loose fasteners and other small parts • Attaches magnetically to any steel surface • Measures 5" in diameter and is 1" deep http://www.bikeeffects.com/proddetail.asp?prod=MIC-02 http://www.bikeeffects.com/proddetail.asp?prod=MIC-02 The MIC-02 Microphone cable for the Garmin zumo™series as well as theGarmin 27XX & 28XX seies is used in conjunction with the MUS-04Isolated Music Cable to allow listening to stereo music and use of theBluetooth phone capabilities from your Garmin. If you are using anothermusic player other than the zumo™ you should use the CAB-66 cable withthese units. http://www.bikeeffects.com/proddetail.asp?prod=75-822 http://www.bikeeffects.com/proddetail.asp?prod=75-822 http://www.bikeeffects.com/prodimages/75-822s.jpg Features of the Midland 75-822 Large LCD readout Built-in 10 channel NOAA weather alerts Instant access to 5 user selected channels Instant channel 9 High/Low power setting with keypad lock Removable battery case 3 year warranty Requires 6 AA Alkaline or 8 NiCad batteries (not included) Includes DC adapter http://www.bikeeffects.com/proddetail.asp?prod=7001260 http://www.bikeeffects.com/proddetail.asp?prod=7001260 http://www.bikeeffects.com/prodimages/7001260s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7001280 http://www.bikeeffects.com/proddetail.asp?prod=7001280 http://www.bikeeffects.com/prodimages/7001280s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7001240 http://www.bikeeffects.com/proddetail.asp?prod=7001240 http://www.bikeeffects.com/prodimages/7001240s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7001300 http://www.bikeeffects.com/proddetail.asp?prod=7001300 http://www.bikeeffects.com/prodimages/7001300s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7001220 http://www.bikeeffects.com/proddetail.asp?prod=7001220 http://www.bikeeffects.com/prodimages/7001220s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7001170 http://www.bikeeffects.com/proddetail.asp?prod=7001170 http://www.bikeeffects.com/prodimages/7001170s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7001190 http://www.bikeeffects.com/proddetail.asp?prod=7001190 http://www.bikeeffects.com/prodimages/7001190s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303150 http://www.bikeeffects.com/proddetail.asp?prod=7303150 http://www.bikeeffects.com/prodimages/7303150s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303120 http://www.bikeeffects.com/proddetail.asp?prod=7303120 http://www.bikeeffects.com/prodimages/7303120s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303110 http://www.bikeeffects.com/proddetail.asp?prod=7303110 http://www.bikeeffects.com/prodimages/7303110s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303130 http://www.bikeeffects.com/proddetail.asp?prod=7303130 http://www.bikeeffects.com/prodimages/7303130s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303160 http://www.bikeeffects.com/proddetail.asp?prod=7303160 http://www.bikeeffects.com/prodimages/7303160s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303180 http://www.bikeeffects.com/proddetail.asp?prod=7303180 http://www.bikeeffects.com/prodimages/7303180s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303170 http://www.bikeeffects.com/proddetail.asp?prod=7303170 http://www.bikeeffects.com/prodimages/7303170s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303100 http://www.bikeeffects.com/proddetail.asp?prod=7303100 http://www.bikeeffects.com/prodimages/7303100s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7303140 http://www.bikeeffects.com/proddetail.asp?prod=7303140 http://www.bikeeffects.com/prodimages/7303140s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7302170 http://www.bikeeffects.com/proddetail.asp?prod=7302170 http://www.bikeeffects.com/prodimages/7302170s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302130 http://www.bikeeffects.com/proddetail.asp?prod=7302130 http://www.bikeeffects.com/prodimages/7302130s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302150 http://www.bikeeffects.com/proddetail.asp?prod=7302150 http://www.bikeeffects.com/prodimages/7302150s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302140 http://www.bikeeffects.com/proddetail.asp?prod=7302140 http://www.bikeeffects.com/prodimages/7302140s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302160 http://www.bikeeffects.com/proddetail.asp?prod=7302160 http://www.bikeeffects.com/prodimages/7302160s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302120 http://www.bikeeffects.com/proddetail.asp?prod=7302120 http://www.bikeeffects.com/prodimages/7302120s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302100 http://www.bikeeffects.com/proddetail.asp?prod=7302100 http://www.bikeeffects.com/prodimages/7302100s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7302110 http://www.bikeeffects.com/proddetail.asp?prod=7302110 http://www.bikeeffects.com/prodimages/7302110s.jpg Thermoformed ABS Mini-Tail, with Clear turn signal lenses, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lenses. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7202120 http://www.bikeeffects.com/proddetail.asp?prod=7202120 http://www.bikeeffects.com/prodimages/7202120s.jpg Thermoformed ABS Undertail (Mini-Tail), with Clear turn signal lenses over Amber LED's, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lens. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7202130 http://www.bikeeffects.com/proddetail.asp?prod=7202130 http://www.bikeeffects.com/prodimages/7202130s.jpg Thermoformed ABS Undertail (Mini-Tail), with Clear turn signal lenses over Amber LED's, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lens. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7202100 http://www.bikeeffects.com/proddetail.asp?prod=7202100 http://www.bikeeffects.com/prodimages/7202100s.jpg Thermoformed ABS Undertail (Mini-Tail), with Clear turn signal lenses over Amber LED's, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lens. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7202140 http://www.bikeeffects.com/proddetail.asp?prod=7202140 http://www.bikeeffects.com/prodimages/7202140s.jpg Thermoformed ABS Undertail (Mini-Tail), with Clear turn signal lenses over Amber LED's, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lens. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7202110 http://www.bikeeffects.com/proddetail.asp?prod=7202110 http://www.bikeeffects.com/prodimages/7202110s.jpg Thermoformed ABS Undertail (Mini-Tail), with Clear turn signal lenses over Amber LED's, LED License Plate light, License Plate rack, wires, rivets included. No extra charge for Amber turn signal lens. Note: Click Here to read the installation guide. http://www.bikeeffects.com/proddetail.asp?prod=7206120 http://www.bikeeffects.com/proddetail.asp?prod=7206120 http://www.bikeeffects.com/prodimages/7206120s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7206100 http://www.bikeeffects.com/proddetail.asp?prod=7206100 http://www.bikeeffects.com/prodimages/7206100s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7206130 http://www.bikeeffects.com/proddetail.asp?prod=7206130 http://www.bikeeffects.com/prodimages/7206130s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=7206110 http://www.bikeeffects.com/proddetail.asp?prod=7206110 http://www.bikeeffects.com/prodimages/7206110s.jpg Thermoformed ABS plastic Mini-Tail, with flasher lens Clear, Leds light board, LED License Plate light, license plate rack, wires, rivets included. Note: no extra charge for Amber flasher lens. http://www.bikeeffects.com/proddetail.asp?prod=MISC-02 http://www.bikeeffects.com/proddetail.asp?prod=MISC-02 Shipping, Handling for Starcom System Board. http://www.bikeeffects.com/proddetail.asp?prod=08-0161 http://www.bikeeffects.com/proddetail.asp?prod=08-0161 http://www.bikeeffects.com/prodimages/08-0161s.jpg The "MP" Tool is the perfect tool to replace your motorcycle's stock tool kit. The "MP" Tool can be used to remove 8, 10, 12 & 14mm bolts, #2 & #3 Phillips screws, small & medium straight-slot screws and 5 & 6mm allen bolts. It includes a 1/4" & 3/8" socket driver, 10mm & 12mm 1/4"-drive sockets and a convenient carrying case. It can even open bottles of your favorite refreshment. Replacement bits are available separately. http://www.bikeeffects.com/proddetail.asp?prod=08-0182 http://www.bikeeffects.com/proddetail.asp?prod=08-0182 http://www.bikeeffects.com/prodimages/08-0182s.jpg • Used to inject lubricant into cable housing • Clamps over housing and wire allowing an aerosol can to be connected • Once lube runs out the far end, the cable is lubricated • Ideal for use with Motion Pro Cable Lube 15-0001 http://www.bikeeffects.com/proddetail.asp?prod=08-0336 http://www.bikeeffects.com/proddetail.asp?prod=08-0336 http://www.bikeeffects.com/prodimages/08-0336s.jpg The Motion Pro® Folding Sag Scale is used for suspension adjustments and should be an essential addition to your sportbike/sport touring tool set. • 6061-T6 aluminum construction • Rigid folding design fits in most tool boxes • Direct reading scale (no subtracting required) • Adjustable zero set point with extended range • Will work on mini and full size motorcycles • Inch and metric scale combination • Installs in rear axle • Can be used to check front or rear sag • Extended length 28 1/4" • Folded length 15 3/4" http://www.bikeeffects.com/proddetail.asp?prod=08-0143 http://www.bikeeffects.com/proddetail.asp?prod=08-0143 http://www.bikeeffects.com/prodimages/08-0143s.jpg • Makes bleeding your brakes a one-person job • Instructions included • Made in the U.S.A. • Will not bleed air from a dry system http://www.bikeeffects.com/proddetail.asp?prod=08-0113 http://www.bikeeffects.com/proddetail.asp?prod=08-0113 http://www.bikeeffects.com/prodimages/08-0113s.jpg Motion Pro® T-Handles feature a chrome-vanadium tool-steel shaft and a carbon-steel handle. The deep 6-point metric sockets allow nuts to be driven over long-threaded bolts. The hex sockets extend only part of the way inside, preventing the nut from being pushed too far into the socket. The outside diameter of the sockets are kept as slim as possible, allowing them to fit into tight areas. • Set of 7 includes 8, 10, 12, 13, 14, 17 and 19mm • Metric T-Handles feature a durable nickel pewter finish • Sets include a vinyl storage pouch • Lifetime replacement warranty http://www.bikeeffects.com/proddetail.asp?prod=08-0340 http://www.bikeeffects.com/proddetail.asp?prod=08-0340 http://www.bikeeffects.com/prodimages/08-0340s.jpg Motion Pro® T-Handles feature a chrome-vanadium tool-steel shaft and a carbon-steel handle. The deep 6-point metric sockets allow nuts to be driven over long-threaded bolts. The hex sockets extend only part of the way inside, preventing the nut from being pushed too far into the socket. The outside diameter of the sockets are kept as slim as possible, allowing them to fit into tight areas. • Set of 5 includes 8, 10, 12, 13 and 14mm • Compact size for easy access and easy transport • 6 3/4" shaft length • Chrome-vanadium tool steel shafts • Durable nickel pewter finish • Includes a vinyl pouch to keep your T-Handles handy • Lifetime replacement warranty http://www.bikeeffects.com/proddetail.asp?prod=08-0397 http://www.bikeeffects.com/proddetail.asp?prod=08-0397 http://www.bikeeffects.com/prodimages/08-0397s.jpg ● Fits internal hex on many late model sportbike axles and some dirt bikes ● Four metric hex sizes: 17, 19, 22 and 24mm ● 3/8 in. square drive on both ends ● Heavy duty CrMo steel construction for shop use This product works for the following models: ● Buell: XB9R, XB9S, XB12R, XB12S (2003-2004) ● Honda: CBR600RR, CBR1000RR ● Kawasaki: ZX6R, ZX6RR, ZX600E/K, ZX7R, ZX9R, Z1000 ● Suzuki: GSXR 2000-2004, V-Strom (all), SV1000 ● Yamaha: FJR1300, FZ1, R1, R6 http://www.bikeeffects.com/proddetail.asp?prod=08-0355 http://www.bikeeffects.com/proddetail.asp?prod=08-0355 http://www.bikeeffects.com/prodimages/08-0355s.jpg For internal hex axle removal on many late model sportbike applications. Four metric hex sizes: 17,19, 22 and 24mm.3/8" square drive on both ends. Made of 7075 T-6 aluminum. Rated for a maximun torque of 90 ft. lbs. If a higher torque value is required, a deep socket should be used on one of the large hexes. Fits the following models: This product works for the following models: ● Buell: XB9R, XB9S, XB12R, XB12S (2003-2004) ● Honda: CBR600RR, CBR1000RR ● Kawasaki: ZX6R, ZX6RR, ZX600E/K, ZX7R, ZX9R, Z1000 ● Suzuki: GSXR 2000-2004, V-Strom (all), SV1000 ● Yamaha: FJR1300, FZ1, R1, R6 http://www.bikeeffects.com/proddetail.asp?prod=ABK02160-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABK02160-0000 http://www.bikeeffects.com/prodimages/abk02160-0000s.jpg This mount is made specifically for the Yamaha FJR1300 06-07 models. This kit places a crossbar between the handlebars to mount either the Base Plate II or one of the Gadget Guy enclosures for the Garmin 26XX or 27XX series You will also need an Expansion Joint to mount to this bracket. http://www.bikeeffects.com/proddetail.asp?prod=ABK02160-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABK02160-0101 http://www.bikeeffects.com/prodimages/abk02160-0101s.jpg This mount is made specifically for the Yamaha FJR1300 06-07 models. This kit places a crossbar between the handlebars to mount either the Base Plate II or one of the Gadget Guy enclosures for the Garmin 26XX or 27XX series You will also need an Expansion Joint to mount to this bracket. http://www.bikeeffects.com/proddetail.asp?prod=ABK02060-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABK02060-0000 http://www.bikeeffects.com/prodimages/ABK02060-0000s.jpg This mount made specifically for the Honda ST1300, places a crossbar between the handlebars for mounting various base plates or enclosures. Retail price $108.00 http://www.bikeeffects.com/proddetail.asp?prod=ABK02060-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABK02060-0101 http://www.bikeeffects.com/prodimages/ABK02060-0101s.jpg This mount made specifically for the Honda ST1300, places a crossbar between the handlebars for mounting various base plates or enclosures. Retail price $115.00 http://www.bikeeffects.com/proddetail.asp?prod=ABK02050-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABK02050-0000 http://www.bikeeffects.com/prodimages/ABK02050-0000s.jpg This mount made specifically for the Yamaha FJR1300 places a crossbar between the handlebars for mounting various base plates or enclosures. This forward mounting allows room for a Tank Bag. http://www.bikeeffects.com/proddetail.asp?prod=ABK02050-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABK02050-0101 http://www.bikeeffects.com/prodimages/ABK02050-0101s.jpg This mount made specifically for the Yamaha FJR1300 places a crossbar between the handlebars for mounting various base plates or enclosures. This forward mounting allows room for a Tank Bag. http://www.bikeeffects.com/proddetail.asp?prod=ABK02040-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABK02040-0000 http://www.bikeeffects.com/prodimages/ABK02040-0000s.jpg FJR1300 places a crossbar between the handlebars for mounting various base plates or enclosures. This rearward mounting may not allow room for a Tank Bag. http://www.bikeeffects.com/proddetail.asp?prod=ABK02040-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABK02040-0101 http://www.bikeeffects.com/prodimages/ABK02040-0101s.jpg This mount made specifically for the Yamaha FJR1300 places a crossbar between the handlebars for mounting various base plates or enclosures. This rearward mounting may not allow room for a Tank Bag. http://www.bikeeffects.com/proddetail.asp?prod=ABK03000-0000 http://www.bikeeffects.com/proddetail.asp?prod=ABK03000-0000 http://www.bikeeffects.com/prodimages/ABK03000-0000s.jpg This mounting kit is for Sportbikes with Clip-ons. The mounting bolts on this kit replace one of the pinch bolts in the clip-ons and places a 11" crossbar so that accesories can be mounted. Retail price $102.00 http://www.bikeeffects.com/proddetail.asp?prod=ABK03040-0101 http://www.bikeeffects.com/proddetail.asp?prod=ABK03040-0101 http://www.bikeeffects.com/prodimages/abk03040-0101s.jpg Kit includes: 1 x 1/2" dia. x 14" Alum. Rod (anodized black); 2 Swivel Joints (anodized black); 2 x 1/4-20x3/4 SHCS SS; 2 x M5x0.8x55 SHCS SS; 2 x 1/2" OD x 3mm tall x 5mm ID SS Bushing (K1200S); 2 x 12.7 OD x 13.3mm to 10 OD x 6mm x 5mm ID SS Step Bushing (K1200S); 2 x Kit III Stand Off (anodized black); 2 x 5/16-18 x 1 1/4 BHCS SS; 1 x 3/16" S.A. Hex Key. Black only. Installation instructions included. This price does not include the installed accessories or GPS enclosure shown in the picture. http://www.bikeeffects.com/proddetail.asp?prod=MUS-01 http://www.bikeeffects.com/proddetail.asp?prod=MUS-01 http://www.bikeeffects.com/prodimages/ Music lead for Walkman type portable stereo headphone socket. http://www.bikeeffects.com/proddetail.asp?prod=CAB-35 http://www.bikeeffects.com/proddetail.asp?prod=CAB-35 http://www.bikeeffects.com/prodimages/cab-35s.jpg Isolated interface cable for navigation and radar equipment. Starcom to 2.5mm and 3.5mm jack.Suitable for most navigation systems which have audio out including Garmin, NavMan, Road Angel, Snooper. (Garmin Quest also requires motorcycle conversion cable) http://www.bikeeffects.com/proddetail.asp?prod=CAB-36 http://www.bikeeffects.com/proddetail.asp?prod=CAB-36 http://www.bikeeffects.com/prodimages/ Isolated interface cable for navigation and radar equipment, Starcom to 3.5mm jack.Suitable for most navigation systems which have audio out via a 3.5mm jack including Garmin.Suitable for Escort S2, 7500, 8500, 9500, X50 & Valentine Radar Detectors. http://www.bikeeffects.com/proddetail.asp?prod=CAB-36A http://www.bikeeffects.com/proddetail.asp?prod=CAB-36A http://www.bikeeffects.com/prodimages/ This is an attenuated (to reduce the volume) isolated interface cable for navigation and radar equipment, Starcom to 3.5mm jack. Suitable for most navigation systems which have audio out via a 3.5mm jack including Garmin. Suitable for Escort S2, 7500, 8500, 9500, X50 & Valentine Radar Detectors. http://www.bikeeffects.com/proddetail.asp?prod=01-7301110 http://www.bikeeffects.com/proddetail.asp?prod=01-7301110 http://www.bikeeffects.com/prodimages/01-7301110s.jpg Great new Dussault designed Mototeck Undertail for the ZX-10R. http://www.bikeeffects.com/proddetail.asp?prod=6000300 http://www.bikeeffects.com/proddetail.asp?prod=6000300 http://www.bikeeffects.com/prodimages/6000300s.jpg NT 2 Brake Light Assembly. Clear lens, 12 Red LED's. Pkg of 1. http://www.bikeeffects.com/proddetail.asp?prod=6000330 http://www.bikeeffects.com/proddetail.asp?prod=6000330 http://www.bikeeffects.com/prodimages/6000330s.jpg NT brake lens housing ( NT brake ) for Leds bulb 1157, sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=6000340 http://www.bikeeffects.com/proddetail.asp?prod=6000340 http://www.bikeeffects.com/prodimages/6000340s.jpg NT brake lens housing ( NT brake & blinker ), sold in unit. http://www.bikeeffects.com/proddetail.asp?prod=6000270 http://www.bikeeffects.com/proddetail.asp?prod=6000270 http://www.bikeeffects.com/prodimages/6000270s.jpg NT Brake Lens (Elipse Design) Clear Lens, sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=6000260 http://www.bikeeffects.com/proddetail.asp?prod=6000260 http://www.bikeeffects.com/prodimages/6000260s.jpg NT Brake Lens (Elipse Design) Red Lens. Sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=6000290 http://www.bikeeffects.com/proddetail.asp?prod=6000290 http://www.bikeeffects.com/prodimages/6000290s.jpg NT Brake Light Lens, (Square Pattern). Clear lens. Pkg of 2. http://www.bikeeffects.com/proddetail.asp?prod=6000280 http://www.bikeeffects.com/proddetail.asp?prod=6000280 http://www.bikeeffects.com/prodimages/6000280s.jpg NT Brake Lens (Square Pattern) Red Lens. Sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=6000110 http://www.bikeeffects.com/proddetail.asp?prod=6000110 http://www.bikeeffects.com/prodimages/6000110s.jpg Brake light assembly (Elipse Design) brake. Clear lens, Phillip screws, pig tail wire, #1157 LED Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000100 http://www.bikeeffects.com/proddetail.asp?prod=6000100 http://www.bikeeffects.com/prodimages/6000100s.jpg Brake Light Assembly (Elipse Design). Red Lens, Phillips screws, pig tail wire, #1157 LED Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000130 http://www.bikeeffects.com/proddetail.asp?prod=6000130 http://www.bikeeffects.com/prodimages/6000130s.jpg Brake light assembly (Square design). Clear lens, Phillips screws, pig tail wire, #1157 LED Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000120 http://www.bikeeffects.com/proddetail.asp?prod=6000120 http://www.bikeeffects.com/prodimages/6000120s.jpg Brake light assembly (Square design). Red lens, Phillips screws, pig tail wire, #1157 LED Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000150 http://www.bikeeffects.com/proddetail.asp?prod=6000150 http://www.bikeeffects.com/prodimages/6000150s.jpg Brake light assembly (Elipse Design). Brake & Blinker. Clear lens, Phillips screws, pig tail wire, #1157 LED Bulb, #194 Flasher Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000140 http://www.bikeeffects.com/proddetail.asp?prod=6000140 http://www.bikeeffects.com/prodimages/6000140s.jpg Brake light assembly (Elipse Design). Brake & Blinker, Red Lens, Phillips screws, pig tail wire, #1157 LED Bulb, #194 Flasher Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000170 http://www.bikeeffects.com/proddetail.asp?prod=6000170 http://www.bikeeffects.com/prodimages/6000170s.jpg Brake light assembly (Square design). Brake & Blinker, Clear lens, Phillips screws, pig tail wire, #1157 LED Bulb, #194 Flasher Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000160 http://www.bikeeffects.com/proddetail.asp?prod=6000160 http://www.bikeeffects.com/prodimages/6000160s.jpg Brake light assembly (Square design). Brake & Blinker, Red lens, Phillips screws, pig tail wire, #1157 LED Bulb, #194 Flasher Bulb included. http://www.bikeeffects.com/proddetail.asp?prod=6000210 http://www.bikeeffects.com/proddetail.asp?prod=6000210 http://www.bikeeffects.com/prodimages/6000210s.jpg Brake light assembly ( Square design ) brake, Clear lens, Phillip screws, pig tail wire, ( 48 Leds'S HQ ) 48 Leds's Red two function, sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=6000190 http://www.bikeeffects.com/proddetail.asp?prod=6000190 http://www.bikeeffects.com/prodimages/6000190s.jpg Brake light assembly (Elipse Design). Clear lens, Phillips screws, pig tail wire, (48 LEDs HQ ) 48 LEDs Red two function. Sold in pairs. http://www.bikeeffects.com/proddetail.asp?prod=OFFSK-Y http://www.bikeeffects.com/proddetail.asp?prod=OFFSK-Y http://www.bikeeffects.com/prodimages/ohlinspringss.jpg • Designed to improve performance and to match the Öhlins shock absorbers. • Give the right balance between front fork and shock absorber. • Approximately 10% harder than the standard springs, but there are exceptions. For some bikes, for example Ducati, the springs are softer than standard! http://www.bikeeffects.com/proddetail.asp?prod=H347 http://www.bikeeffects.com/proddetail.asp?prod=H347 http://www.bikeeffects.com/prodimages/ho204s.jpg Fully adjustable version of the hlins "piggy back" Super effective adjustable high and low speed compression damping Features hose mounted hydraulic spring preload adjuster Easy adjustable rebound Adjustable length to improve steering response Internal temperature compensation for the damping "Piggyback" type gives improved cooling with more consistent damping and longer damper life Retail Price $1212.95 http://www.bikeeffects.com/proddetail.asp?prod=HO207 http://www.bikeeffects.com/proddetail.asp?prod=HO207 http://www.bikeeffects.com/prodimages/ho207s.jpg Type 46PRC with hose mounted reservoir, easy to fit where it is easy to reach Fully adjustable single shock absorber Improved cooling gives more consistent damping and longer damper life Features compression, rebound and hydraulic pre-load adjuster Retail Price $981.95 http://www.bikeeffects.com/proddetail.asp?prod=HO204 http://www.bikeeffects.com/proddetail.asp?prod=HO204 http://www.bikeeffects.com/prodimages/ho204s.jpg Fully adjustable version of the hlins "piggy back" Super effective adjustable high and low speed compression damping Features hose mounted hydraulic spring preload adjuster Easy adjustable rebound. Adjustable length to improve steering response Internal temperature compensation for the damping. "Piggyback" type gives improved cooling with more consistent damping and longer damper Retail Price $1212.95 http://www.bikeeffects.com/proddetail.asp?prod=KA345 http://www.bikeeffects.com/proddetail.asp?prod=KA345 http://www.bikeeffects.com/prodimages/ka345s.jpg Fully adjustable version of the hlins "piggy back" Super effective adjustable high and low speed compression damping Features hose mounted hydraulic spring preload adjuster Easy adjustable rebound Adjustable length to improve steering response Internal temperature compensation for the damping "Piggyback" type gives improved cooling with more consistent damping and longer damper life Retail Price $1212.95 http://www.bikeeffects.com/proddetail.asp?prod=KA942 http://www.bikeeffects.com/proddetail.asp?prod=KA942 http://www.bikeeffects.com/prodimages/ka209s.jpg Fully adjustable single shock absorber "Piggy back" reservoir with floating piston Improved cooling gives more consistent damping and longer damper life Has all our adjustment features, compression, rebound, length and hydraulic pre-load adjuster Probably one of the most advanced single shock absorber around Retail Price 1093.95 http://www.bikeeffects.com/proddetail.asp?prod=KA209 http://www.bikeeffects.com/proddetail.asp?prod=KA209 http://www.bikeeffects.com/prodimages/ka209s.jpg Fully adjustable single shock absorber "Piggy back" reservoir with floating piston Improved cooling gives more consistent damping and longer damper life Has all our adjustment features, compression, rebound, length and hydraulic pre-load adjuster Probably one of the most advanced single shock absorber around Retail Price 1093.95 http://www.bikeeffects.com/proddetail.asp?prod=SU503 http://www.bikeeffects.com/proddetail.asp?prod=SU503 http://www.bikeeffects.com/prodimages/su503s.jpg Fully adjustable version of the hlins "piggy back" Super effective adjustable high and low speed compression damping Features hose mounted hydraulic spring preload adjuster Easy adjustable rebound Adjustable length to improve steering response Internal temperature compensation for the damping "Piggyback" type gives improved cooling with more consistent damping and longer damper life Retail Price $1212.95 http://www.bikeeffects.com/proddetail.asp?prod=YA052 http://www.bikeeffects.com/proddetail.asp?prod=YA052 http://www.bikeeffects.com/prodimages/ya052s.jpg The ultimate shock for your FJR1300. • Fully adjustable single shock absorber. • "Piggy back" reservoir with floating piston. • Improved cooling gives more consistent damping and longer damper life. • Features compression, rebound and hydraulic pre-load adjuster. Order this shock and give us your rider weight with riding gear on and we will supply this shock with the appropriate spring installed at no extra charge. http://www.bikeeffects.com/proddetail.asp?prod=YA342 http://www.bikeeffects.com/proddetail.asp?prod=YA342 http://www.bikeeffects.com/prodimages/ya052s.jpg The ultimate shock for your FJR1300 with ABS. • Fully adjustable single shock absorber. • "Piggy back" reservoir with floating piston. • Improved cooling gives more consistent damping and longer damper life. • Features compression, rebound and hydraulic pre-load adjuster. Order this shock and give us your rider weight with riding gear on and we will supply this shock with the appropriate spring installed at no extra charge. Retail price $1062.95 http://www.bikeeffects.com/proddetail.asp?prod=YA707 http://www.bikeeffects.com/proddetail.asp?prod=YA707 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg The ultimate shock for your second generation FJR1300. • Fully adjustable single shock absorber. • Remote reservoir with floating piston. • Improved cooling gives more consistent damping and longer damper life. • Features compression, rebound and a remote hydraulic pre-load adjuster. Order this shock and give us your rider weight with riding gear on and we will supply this shock with the appropriate spring installed at no extra charge. Call for lead times for delivery. http://www.bikeeffects.com/proddetail.asp?prod=YA313 http://www.bikeeffects.com/proddetail.asp?prod=YA313 http://www.bikeeffects.com/prodimages/ya313s.jpg 46mm Emulsion-type shock absorber. • Rebound adjuster • Mechanical spring preload adjuster Retail Price $981.85 http://www.bikeeffects.com/proddetail.asp?prod=YA343 http://www.bikeeffects.com/proddetail.asp?prod=YA343 http://www.bikeeffects.com/prodimages/ya343s.jpg 46mm monotube shock absorber with external reservoir, for improved cooling that gives more consistent damping and longer damper life. • Adjustable high and low speed compression damping • Adjustable rebound • Adjustable length • Hose mounted hydraulic spring preload adjuster. Retail Price $1154.95 http://www.bikeeffects.com/proddetail.asp?prod=113-1520OG http://www.bikeeffects.com/proddetail.asp?prod=113-1520OG Oil Cooler Guard 916/996 This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=LS12/0.6 http://www.bikeeffects.com/proddetail.asp?prod=LS12/0.6 http://www.bikeeffects.com/prodimages/08-0254s.jpg The OptiMate III is the most advanced fully automatic diagnostic battery charger for all 12V lead-acid batteries (2.5 to 32 Ampere-hours capacity) and is ideal for Motorcycle batteries whether they are dry-charged MF, factory-sealed "wet" MF type, or conventional starter batteries with filler caps. It is also effective for GEL-electrolyte sealed, VRLA batteries. All the major manufacturers of cranking (starter) batteries recommend maintaining such batteries FULLY CHARGED during periods of non-use and the OptiMate III is safe to connect indefinitely to any vehicle with no risk of over-charging. The OptiMate III's unique diagnostic function automatically identifies deeply discharged (sulfated) batteries and applies a controlled high voltage and small fixed current for a limited period to recover them. This brings many of these deeply discharged (sulfated) batteries back to life. Retail price $66.50 http://www.bikeeffects.com/proddetail.asp?prod=PPC-019 http://www.bikeeffects.com/proddetail.asp?prod=PPC-019 http://www.bikeeffects.com/prodimages/pac-033s.jpg Charge into your Powerlet/BMW outlet with this cable. It fits Optimate, Accumate and other chargers with like connectors. Approx 6" long. http://www.bikeeffects.com/proddetail.asp?prod=3100180 http://www.bikeeffects.com/proddetail.asp?prod=3100180 http://www.bikeeffects.com/prodimages/3100180s.jpg Orange trim for Flushmounts with two way tape. Dimensions 1 7\8 " by 3 7\16" - 48mm by 98mm. 2 Per Pkg. http://www.bikeeffects.com/proddetail.asp?prod=QR-2 http://www.bikeeffects.com/proddetail.asp?prod=QR-2 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg O-ring for Scotts Stainless Steel Oil Filter housing. Fits S5, & S6. Pkg of 1. http://www.bikeeffects.com/proddetail.asp?prod=QR-1 http://www.bikeeffects.com/proddetail.asp?prod=QR-1 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg O-ring for Scotts Stainless Steel Oil Filter housing. Fits S1, S2, S9 & S11. Pkg of 1. http://www.bikeeffects.com/proddetail.asp?prod=76125003 http://www.bikeeffects.com/proddetail.asp?prod=76125003 http://www.bikeeffects.com/prodimages/76125003.gif The Dynojet Oxygen Sensor Controller is a small digital module that interfaces with the bike's O2 sensor circuit and ECU. It allows the Power Commander to correctly adjust the normally fixed "closed loop" area (throttle openings of less  than 40% and RPM less than 3000) of the fuel curve. Without this device, the bike would be locked into an overly lean condition in the above throttle and RPM ranges. This O2 Sensor Controller does not eliminate the need to map the bike in this range and should not be used without a Power Commander in place. With the O2 Sensor Controller installed, a Power Commander can be mapped in all areas using either Tuning Link or by the manual method. http://www.bikeeffects.com/proddetail.asp?prod=76423019 http://www.bikeeffects.com/proddetail.asp?prod=76423019 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Oxygen Sensor Eliminator for European GSX-R1000 07-08. http://www.bikeeffects.com/proddetail.asp?prod=76423008 http://www.bikeeffects.com/proddetail.asp?prod=76423008 http://www.bikeeffects.com/prodimages/76423005s.jpg The system is designed to read the Oxygen sensor under certain conditions and temporarily change the air/fuel ratio. The closed loop circuit has a very limited operating range, which is only in effect while holding a steady speed at certain rpm's and throttle positions. In this limited area, the stock system (with or without the Power Commander) will gradually and temporarily lean out the air fuel ratio in an attempt to achieve an air/fuel ratio of 14.7:1 (stochiometric). The Oxygen sensors can be disconnected but this will trip the F.I. dash warning light. http://www.bikeeffects.com/proddetail.asp?prod=76423007 http://www.bikeeffects.com/proddetail.asp?prod=76423007 Required for Power Commander installations on some California andEuropean Honda models that have oxygen sensors. The kit disables theclosed loop system for racing use. http://www.bikeeffects.com/proddetail.asp?prod=76423005 http://www.bikeeffects.com/proddetail.asp?prod=76423005 http://www.bikeeffects.com/prodimages/76423005s.jpg The system is designed to read the Oxygen sensor under certain conditions and temporarily change the air/fuel ratio. The closed loop circuit has a very limited operating range, which is only in effect while holding a steady speed at certain rpm's and throttle positions. In this limited area, the stock system (with or without the Power Commander) will gradually and temporarily lean out the air fuel ratio in an attempt to achieve an air/fuel ratio of 14.7:1 (stochiometric). The Oxygen sensors can be disconnected but this will trip the F.I. dash warning light. http://www.bikeeffects.com/proddetail.asp?prod=76423021 http://www.bikeeffects.com/proddetail.asp?prod=76423021 http://www.bikeeffects.com/proddetail.asp?prod=PP8500 http://www.bikeeffects.com/proddetail.asp?prod=PP8500 http://www.bikeeffects.com/prodimages/pp8500s.jpg Hailed as the most revolutionary radar/laser detector ever. The Passport 8500 X50's new "V-Tuned" radar receiver provides extreme detection range on all police radar; conventional and "instant-on" radar, including the new POP mode radar threat, X-Band, and up to 50% more range than the original Passport 8500 on the all-important K and Ka bands. Digital signal processing (DSP) provides maximum range, with minimum false alarms. Features 360-degree radar and laser detection Advanced digital signal processing AutoSensitivity mode automatically reduces false alarms EZ-Programming allows instant customization Selectable POP mode radar detection 3 High-resolution meter modes Ultra-bright matrix display with 280 LEDs Brilliant high-intensity red display Multiple high-performance laser sensors Built-in earphone jack Mute & AutoMute Completely immune to the VG-2 "detector-detector" One year limited warranty http://www.bikeeffects.com/proddetail.asp?prod=6400150 http://www.bikeeffects.com/proddetail.asp?prod=6400150 http://www.bikeeffects.com/prodimages/6400150s.jpg Patch logo GSX-1300R Hayabusa Blue. Patch dimension 6"x 4" and 4" x 3". Key Chain dimension 1 1/2" x 1". Two patches and key chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400160 http://www.bikeeffects.com/proddetail.asp?prod=6400160 http://www.bikeeffects.com/prodimages/6400160s.jpg Patch, Logo GSX-1300R Hayabusa Red. Patch dimension 6"x 4" and 4" x 3". Key Chain dimension 1 1/2" x 1". Two patches and key chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400170 http://www.bikeeffects.com/proddetail.asp?prod=6400170 http://www.bikeeffects.com/prodimages/6400170s.jpg Patch, Logo GSX-1300R Hayabusa Silver. Patch dimension 6"x 4" and 4" x 3". Key Chain dimension 1 1/2" x 1". Two patches and key chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400180 http://www.bikeeffects.com/proddetail.asp?prod=6400180 http://www.bikeeffects.com/prodimages/6400180s.jpg Patch, Logo GSX-1300R Hayabusa Yellow. Patch dimension 6"x 4" and 4" x 3". Key Chain dimension 1 1/2" x 1". Two patches and key chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400100 http://www.bikeeffects.com/proddetail.asp?prod=6400100 http://www.bikeeffects.com/prodimages/6400100s.jpg Patch, Logo GSX-R Blue. Patch dimension 3"x 1 1/2". Key Chain dimension 1 1/2" x 3/4". One patch and one Key Chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400110 http://www.bikeeffects.com/proddetail.asp?prod=6400110 http://www.bikeeffects.com/prodimages/6400110s.jpg Patch, Logo GSX-R Red. Patch dimension 3"x 1 1/2". Key Chain dimension 1 1/2" x 3/4". One patch and one Key Chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400120 http://www.bikeeffects.com/proddetail.asp?prod=6400120 http://www.bikeeffects.com/prodimages/6400120s.jpg Patch, Logo GSX-R Silver. Patch dimension 3"x 1 1/2". Key Chain dimension 1 1/2" x 3/4". One patch and one Key Chain included. http://www.bikeeffects.com/proddetail.asp?prod=6400130 http://www.bikeeffects.com/proddetail.asp?prod=6400130 http://www.bikeeffects.com/prodimages/6400130s.jpg Patch, Logo GSX-R Yellow. Patch dimension 3"x 1 1/2". Key Chain dimension 1 1/2" x 3/4". One patch and one Key Chain included. http://www.bikeeffects.com/proddetail.asp?prod=PR07-APR http://www.bikeeffects.com/proddetail.asp?prod=PR07-APR http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR08-BMW http://www.bikeeffects.com/proddetail.asp?prod=PR08-BMW Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR09-BUEL http://www.bikeeffects.com/proddetail.asp?prod=PR09-BUEL http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR05-DUC http://www.bikeeffects.com/proddetail.asp?prod=PR05-DUC http://www.bikeeffects.com/prodimages/pr-ducs.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR02-HON http://www.bikeeffects.com/proddetail.asp?prod=PR02-HON http://www.bikeeffects.com/prodimages/pr-hons.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR03-KAW http://www.bikeeffects.com/proddetail.asp?prod=PR03-KAW http://www.bikeeffects.com/prodimages/pr-kaws.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR10-MOTO http://www.bikeeffects.com/proddetail.asp?prod=PR10-MOTO http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR04-SUZ http://www.bikeeffects.com/proddetail.asp?prod=PR04-SUZ http://www.bikeeffects.com/prodimages/pr-suzs.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR06-TRI http://www.bikeeffects.com/proddetail.asp?prod=PR06-TRI http://www.bikeeffects.com/prodimages/pr-tris.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=PR01-YAM http://www.bikeeffects.com/proddetail.asp?prod=PR01-YAM http://www.bikeeffects.com/prodimages/pr-yams.jpg Pazzo Racing levers are machined from 6061 T6 Aluminum Billet with a jeweled machined finish and are available in eight different colors with a choice two different lengths and 6 different adjuster colors. 6 position lever adjustment 7075 Type 3 black anodized cam blocks Brass pivot bushings Stainless Steel hardware Free shipping for US orders only. No sales of this product outside of the US. http://www.bikeeffects.com/proddetail.asp?prod=08-0316 http://www.bikeeffects.com/proddetail.asp?prod=08-0316 http://www.bikeeffects.com/prodimages/08-0316s.jpg This tool uses Reverse Fluid Injection to push fluid up from the bottom of the brake system, taking all the air bubbles with it. It can be used on a dry system. • Handle and body are made of high-strength Zytel® (glass-reinforced nylon) • 10 ml. of fluid per injection stroke • RFI™ technology • Ergonomic design is compact and comfortable to use • Affordable to the individual technician or enthusiast • Includes adapters to fit most brake systems and brake fluid cans • Compatible with all brake fluids • Main body colors may vary http://www.bikeeffects.com/proddetail.asp?prod=IC-PHO http://www.bikeeffects.com/proddetail.asp?prod=IC-PHO http://www.bikeeffects.com/prodimages/ The phone kit includes a 1.5m interface cable and a phone specific adapter as required to suit your phone The phone must have a auto answer function to allow a hands free conversation. Click Here to view the latest list of compatible cellular phones from the Starcom1 Web site. When ordering online, list your compatible cellular telephone make and model number in the remarks during the checkout process. http://www.bikeeffects.com/proddetail.asp?prod=62015P http://www.bikeeffects.com/proddetail.asp?prod=62015P http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Pivot Shaft, 2.5". Available in Silver or Black. No returns on this item. http://www.bikeeffects.com/proddetail.asp?prod=62035PS http://www.bikeeffects.com/proddetail.asp?prod=62035PS http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Pivot Shaft, 3.5". Available in Silver or Black. No returns on this item. http://www.bikeeffects.com/proddetail.asp?prod=PAC-007 http://www.bikeeffects.com/proddetail.asp?prod=PAC-007 http://www.bikeeffects.com/prodimages/pac007s.jpg Plug in two heated vests or other accessories without adding an extrasocket! Converts one Powerlet/BMW socket to two Powerlet/BMW sockets. Approx 10" long. http://www.bikeeffects.com/proddetail.asp?prod=PAC-006 http://www.bikeeffects.com/proddetail.asp?prod=PAC-006 http://www.bikeeffects.com/prodimages/pac006s.jpg Plug two heated vests into your single Powerlet™ BMW Type socket! Approx 8" long. http://www.bikeeffects.com/proddetail.asp?prod=6407130 http://www.bikeeffects.com/proddetail.asp?prod=6407130 http://www.bikeeffects.com/prodimages/6407130s.jpg Plastic snap in caps. Perfect to cover up holes or to fix aftermarket parts on your bike. Comes with the base snap and the cap. 4 caps per package. http://www.bikeeffects.com/proddetail.asp?prod=6407120 http://www.bikeeffects.com/proddetail.asp?prod=6407120 http://www.bikeeffects.com/prodimages/6407120s.jpg Plastic Rivet Lock. Phillips screw lock devise in Black, size large. 10 per package. http://www.bikeeffects.com/proddetail.asp?prod=6407100 http://www.bikeeffects.com/proddetail.asp?prod=6407100 http://www.bikeeffects.com/prodimages/6407100s.jpg Plastic Rivet Lock. Phillips screw lock devise in Black, size small. 10 per package. http://www.bikeeffects.com/proddetail.asp?prod=6407110 http://www.bikeeffects.com/proddetail.asp?prod=6407110 http://www.bikeeffects.com/prodimages/6407110s.jpg Push in plastic Rivet Lock in Black. A perfect replacement for the Suzuki OEM one. Size small. 5 per package. http://www.bikeeffects.com/proddetail.asp?prod=PP-10 http://www.bikeeffects.com/proddetail.asp?prod=PP-10 http://www.bikeeffects.com/prodimages/pp-10s.jpg Generic ear plugs/stereo phones. http://www.bikeeffects.com/proddetail.asp?prod=010-10908-00 http://www.bikeeffects.com/proddetail.asp?prod=010-10908-00 http://www.bikeeffects.com/prodimages/010-10908-00s.jpg Portable Friction Mount for nüvi® and StreetPilot® c and i series. No installation required. http://www.bikeeffects.com/proddetail.asp?prod=EX-250B-2 http://www.bikeeffects.com/proddetail.asp?prod=EX-250B-2 http://www.bikeeffects.com/prodimages/ex-250bs.jpg Posi-Tap™ Line Tap connectors for wires 12-18 gauge. No tools required. Package of 2. http://www.bikeeffects.com/proddetail.asp?prod=EX-250B-5 http://www.bikeeffects.com/proddetail.asp?prod=EX-250B-5 http://www.bikeeffects.com/prodimages/ex-250bs.jpg Posi-Tap™ Line Tap connectors for wires 12-18 gauge. No tools required. Package of 5. http://www.bikeeffects.com/proddetail.asp?prod=PC-V-M http://www.bikeeffects.com/proddetail.asp?prod=PC-V-M http://www.bikeeffects.com/prodimages/small/PC-V-M-1.jpg Reduced size from PCIIIusb (less than half of the size of PCIII) USB powered from computer (9 volt adapter is no longer needed for programming) 2 position map switching function built in (map switch not included) Gear/Speed input (allows for map adjustment based on gear and speed) Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature) With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables). Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes 10 throttle position columns (up from 9 on PCIIIusb) Enhanced “accel pump” utility (increased adjustment and sensitivity ranges) http://www.bikeeffects.com/proddetail.asp?prod=411-A http://www.bikeeffects.com/proddetail.asp?prod=411-A http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. MSRP is $339.00 http://www.bikeeffects.com/proddetail.asp?prod=411-D http://www.bikeeffects.com/proddetail.asp?prod=411-D http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. MSRP is $339.00 http://www.bikeeffects.com/proddetail.asp?prod=411-HD http://www.bikeeffects.com/proddetail.asp?prod=411-HD http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. http://www.bikeeffects.com/proddetail.asp?prod=411-H http://www.bikeeffects.com/proddetail.asp?prod=411-H http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. Note for owners of California Models: Many California models require 1 or 2 Oxygen Sensor Eliminator Kits. If you have a bike sold for the California market and your model shows an Asterisk (*) after the Part Number, one Oxygen Sensor Eliminator Kit is required. If two Asterisks are shown (**), 2 kits are required. These are sold separately.   Sensor Eliminator Kit, Product ID #76423005. Click Here to view  or  order  the Oxygen Sensor Eliminator Kit. http://www.bikeeffects.com/proddetail.asp?prod=411-KC http://www.bikeeffects.com/proddetail.asp?prod=411-KC http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. MSRP is $339.95 Note: The Vulcan 2000 requires a Oxygen Sensor Eliminator Kit, Product ID 76423007 http://www.bikeeffects.com/proddetail.asp?prod=411-KS http://www.bikeeffects.com/proddetail.asp?prod=411-KS http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. MSRP is $339.95 http://www.bikeeffects.com/proddetail.asp?prod=411-SC http://www.bikeeffects.com/proddetail.asp?prod=411-SC http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. MSRP is $349.95 Note for owners of California Models: Many California models require 1 or 2 Oxygen Sensor Eliminator Kits. If you have a bike sold for the California market and your model shows an Asterisk (*) after the Part Number, one Oxygen Sensor Eliminator Kit is required. If two Asterisks are shown (**), 2 kits are required. These are sold separately.   Sensor Eliminator Kit, Product ID #76423008. Click Here to view  or  order  the Oxygen Sensor Eliminator Kit. http://www.bikeeffects.com/proddetail.asp?prod=411-SS http://www.bikeeffects.com/proddetail.asp?prod=411-SS http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. MSRP is $349.95 http://www.bikeeffects.com/proddetail.asp?prod=411-T http://www.bikeeffects.com/proddetail.asp?prod=411-T http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. Note for owners of California Models: Many California models require an Oxygen Sensor Eliminator Kit. If you have a bike sold for the California market and your model shows an Asterisk (*) after the Part Number, an Oxygen Sensor Eliminator Kit is required. If three Asterisks are shown (***), an optional Oxygen Sensor Controller is available. If four Asterisks are shown (****), the Power Commander includes an Oxygen Sensor Controller.    Oxygen Sensor Eliminator Kit, Product ID #76423005. Click Here to view  or  order  the Oxygen Sensor Eliminator Kit. Click Here to view  or  order  the Oxygen Sensor Controller, Product ID # 76125003.   http://www.bikeeffects.com/proddetail.asp?prod=411-Y http://www.bikeeffects.com/proddetail.asp?prod=411-Y http://www.bikeeffects.com/prodimages/104-122-411s.jpg The best fuel injection remapping product. Easy to install, easy to load maps, improves throttle response. Note: The TDM 900 requires an Oxygen Sensor Eliminator Kit, sold separately. Oxygen Sensor Eliminator Kit, Product ID #76423005. MSRP is $339.95 http://www.bikeeffects.com/proddetail.asp?prod=FLT-01 http://www.bikeeffects.com/proddetail.asp?prod=FLT-01 http://www.bikeeffects.com/prodimages/flt-01s.jpg This product is a DC Fitting Kit incorporating a power filter to reduce/remove conducted electrical interference noise from the power supply. http://www.bikeeffects.com/proddetail.asp?prod=PPC-001 http://www.bikeeffects.com/proddetail.asp?prod=PPC-001 http://www.bikeeffects.com/prodimages/ppc001s.jpg Works with Garmin III+, V and Streetpilot models. Approx 18" long. Stretches over 3 ft. Powerlet Plug. http://www.bikeeffects.com/proddetail.asp?prod=PPC-002 http://www.bikeeffects.com/proddetail.asp?prod=PPC-002 http://www.bikeeffects.com/prodimages/ppc002s.jpg Works with Garmin III+, V and Streetpilot models. Made of high quality, insulated 22AWG red/black wire. Length is 60in. http://www.bikeeffects.com/proddetail.asp?prod=PPC-003 http://www.bikeeffects.com/proddetail.asp?prod=PPC-003 http://www.bikeeffects.com/prodimages/ppc003s.jpg Connect your Garmin 7-pin flat audio through our Powerlet plug. Works on Garmin 26XX series and 2700 series models. http://www.bikeeffects.com/proddetail.asp?prod=PKT-067 http://www.bikeeffects.com/proddetail.asp?prod=PKT-067 http://www.bikeeffects.com/prodimages/pkt-067ss.jpg This product completely solves the battery charging and heated clothing problems that are associated with the CANbus system on BMW's. The quick installation harness plugs directly onto the back of the stock socket and will not harm or interfere with the CANbus system. Once the heavy duty harness is installed, you can use a standard battery charger and/or any brand of heated clothing. This Powerlet iCAN Harness is designed for 2005 and newer BMW motorcycles with the factory 5 amp, switched ignition CANbus system. Click hereto view the fitment guide. http://www.bikeeffects.com/proddetail.asp?prod=PKT-042 http://www.bikeeffects.com/proddetail.asp?prod=PKT-042 http://www.bikeeffects.com/prodimages/pkt-042s.jpg K1200GT, R1200GS and R1200S BMW's built after 08/06 require kit PKT-042-12 which include a Powerlet socket (see the PDF Fit Chart). These models come stock with a new light duty 5 amp plastic socket from BMW.  Click hereto view the fitment guide. http://www.bikeeffects.com/proddetail.asp?prod=PAC-009 http://www.bikeeffects.com/proddetail.asp?prod=PAC-009 http://www.bikeeffects.com/prodimages/pac-009s.jpg Manufactured with a deluxe plug (PPL-002) and 16awg wire. Choose length desired when ordering. http://www.bikeeffects.com/proddetail.asp?prod=PTB-010 http://www.bikeeffects.com/proddetail.asp?prod=PTB-010 http://www.bikeeffects.com/prodimages/ptb-010s.jpg This power cable pass through is a convenient solution to enable the pass through of cables in and out of the bag without needing to leave zippers open. Easily installs in minutes in any type of bag. http://www.bikeeffects.com/proddetail.asp?prod=PTB-001 http://www.bikeeffects.com/proddetail.asp?prod=PTB-001 http://www.bikeeffects.com/prodimages/ptb-001s.jpg The external power cord can be connected to a Battery Tender lead, a Powerlet socket, a BMW socket, or a cigarette outlet using the appropriate cable. If your Battery Tender Lead is long enough, it will plug right into the PTB connector! On the inside of the tank-bag (or saddlebag) cigarette, SAE & Powerlet adapters can be used. There are more sophisticated adapters/modules planned for the future. Kits comes with the items in the picture and detailed installation instructions. http://www.bikeeffects.com/proddetail.asp?prod=PTB-006 http://www.bikeeffects.com/proddetail.asp?prod=PTB-006 http://www.bikeeffects.com/prodimages/ptb-006s.jpg Includes everything in PTB-001 plus PAC-009-18. Requires Powerlet (BMW type) connector. Made in USA. http://www.bikeeffects.com/proddetail.asp?prod=PTB-003 http://www.bikeeffects.com/proddetail.asp?prod=PTB-003 http://www.bikeeffects.com/prodimages/ptb-003s.jpg Includes everything in PTB-001 plus PAC-026. Made in USA. http://www.bikeeffects.com/proddetail.asp?prod=PTB-004 http://www.bikeeffects.com/proddetail.asp?prod=PTB-004 http://www.bikeeffects.com/prodimages/ptb004s.jpg The PowerMate Kit - PTB-004 Includes everything in PTB-001 plus PAC-026 and PKT-001-48. Made in USA. http://www.bikeeffects.com/proddetail.asp?prod=PTB-005 http://www.bikeeffects.com/proddetail.asp?prod=PTB-005 http://www.bikeeffects.com/prodimages/ptb-005s.jpg Includes everything in PTB-001 plus PAC-022-24. Requires Battery Tender lead.Made in USA. Patent Pending. http://www.bikeeffects.com/proddetail.asp?prod=PTT-02 http://www.bikeeffects.com/proddetail.asp?prod=PTT-02 http://www.bikeeffects.com/prodimages/ptt-02s.jpg Push-To-Talk Handle bar switch kit with 6ft straight extension cable. Unobtrusive mounting. Mounts under the left grip, for easy thumb press control. http://www.bikeeffects.com/proddetail.asp?prod=PTT-02-3 http://www.bikeeffects.com/proddetail.asp?prod=PTT-02-3 http://www.bikeeffects.com/prodimages/ptt-02s.jpg Push-To-Talk Handle bar switch kit with 6ft straight extension cable.Unobtrusive mounting. Mounts under the left grip, for easy thumb presscontrol. http://www.bikeeffects.com/proddetail.asp?prod=PTT-01 http://www.bikeeffects.com/proddetail.asp?prod=PTT-01 http://www.bikeeffects.com/prodimages/ptt-01s.jpg Push-To-Talk Handle bar switch kit with 4ft straight extension cable. http://www.bikeeffects.com/proddetail.asp?prod=PTT-03 http://www.bikeeffects.com/proddetail.asp?prod=PTT-03 http://www.bikeeffects.com/prodimages/ptt-02s.jpg Push-To-Talk Handle bar switch kit with 6ft straight extension cable. Mounts under the left grip, for easy thumb press control.NOTE: Circuitry in this switch disables VOX for Bike-to-Bike radios but still allows VOX to operate in other modes of operation.  http://www.bikeeffects.com/proddetail.asp?prod=PTT-03-3 http://www.bikeeffects.com/proddetail.asp?prod=PTT-03-3 http://www.bikeeffects.com/prodimages/ptt-02s.jpg Push-To-Talk Handle bar switch kit with 3 meter straight extension cable. Mounts under the left grip, for easy thumb press control. NOTE:Circuitry in this switch disables VOX for Bike-to-Bike radios but stillallows VOX to operate in other modes of operation. http://www.bikeeffects.com/proddetail.asp?prod=3-60003 http://www.bikeeffects.com/proddetail.asp?prod=3-60003 http://www.bikeeffects.com/prodimages/small/3-60003-1.jpg The Quick Change Adapter makes changing accessories a snap. Mount thedevice tothe Quick Change plate and then slide it onto any standardTechMount top plateand it locks into place with a spring loadedlocating pin. Simply press the pinto release the adapter and slide offto remove. Black only. Note: This adapter is for round top plates only. http://www.bikeeffects.com/proddetail.asp?prod=60003 http://www.bikeeffects.com/proddetail.asp?prod=60003 http://www.bikeeffects.com/prodimages/60003s.jpg The Quick Change Adapter makes changing accessories a snap. Mount the device tothe Quick Change plate and then slide it onto any standard TechMount top plateand it locks into place with a spring loaded locating pin. Simply press the pinto release the adapter and slide off to remove. Black only. Note: This adapter is for rectangular top plates only. http://www.bikeeffects.com/proddetail.asp?prod=32104060 http://www.bikeeffects.com/proddetail.asp?prod=32104060 http://www.bikeeffects.com/prodimages/32104060s.jpg Female/Female Shift Rod A (Black Anodized Aluminum) http://www.bikeeffects.com/proddetail.asp?prod=32104050 http://www.bikeeffects.com/proddetail.asp?prod=32104050 http://www.bikeeffects.com/prodimages/32104050s.jpg Male/Male Shift Rod B (Black Anodized Aluminum) http://www.bikeeffects.com/proddetail.asp?prod=32104030 http://www.bikeeffects.com/proddetail.asp?prod=32104030 http://www.bikeeffects.com/prodimages/32104030s.jpg Male/Female M6 Shift Rod C (Black Anodized Aluminum) http://www.bikeeffects.com/proddetail.asp?prod=32105030 http://www.bikeeffects.com/proddetail.asp?prod=32105030 http://www.bikeeffects.com/prodimages/32105030s.jpg Male/Female M8/M6 Shift Rod D (Black Anodized Aluminum) http://www.bikeeffects.com/proddetail.asp?prod=113-1506 http://www.bikeeffects.com/proddetail.asp?prod=113-1506 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-10019 http://www.bikeeffects.com/proddetail.asp?prod=113-10019 http://www.bikeeffects.com/prodimages/small/113-10019-1.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-10039 http://www.bikeeffects.com/proddetail.asp?prod=113-10039 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-10404 http://www.bikeeffects.com/proddetail.asp?prod=113-10404 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1004 http://www.bikeeffects.com/proddetail.asp?prod=113-1004 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1034 http://www.bikeeffects.com/proddetail.asp?prod=113-1034 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1009 http://www.bikeeffects.com/proddetail.asp?prod=113-1009 http://www.bikeeffects.com/prodimages/coxguard-929s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1024 http://www.bikeeffects.com/proddetail.asp?prod=113-1024 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-10014 http://www.bikeeffects.com/proddetail.asp?prod=113-10014 http://www.bikeeffects.com/prodimages/coxguard-rc51s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of the USA. http://www.bikeeffects.com/proddetail.asp?prod=113-11039 http://www.bikeeffects.com/proddetail.asp?prod=113-11039 http://www.bikeeffects.com/prodimages/small/113-11039-1.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-11054 http://www.bikeeffects.com/proddetail.asp?prod=113-11054 http://www.bikeeffects.com/prodimages/small/113-11054-1.jpg Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-11504 http://www.bikeeffects.com/proddetail.asp?prod=113-11504 http://www.bikeeffects.com/prodimages/small/113-11504-1.jpg Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-11514 http://www.bikeeffects.com/proddetail.asp?prod=113-11514 http://www.bikeeffects.com/prodimages/small/113-11514-1.jpg Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-0019 http://www.bikeeffects.com/proddetail.asp?prod=113-0019 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of the USA. http://www.bikeeffects.com/proddetail.asp?prod=113-11059 http://www.bikeeffects.com/proddetail.asp?prod=113-11059 http://www.bikeeffects.com/prodimages/113-11059s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1124 http://www.bikeeffects.com/proddetail.asp?prod=113-1124 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1103 http://www.bikeeffects.com/proddetail.asp?prod=113-1103 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1144 http://www.bikeeffects.com/proddetail.asp?prod=113-1144 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1134 http://www.bikeeffects.com/proddetail.asp?prod=113-1134 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1224 http://www.bikeeffects.com/proddetail.asp?prod=113-1224 http://www.bikeeffects.com/prodimages/coxguard-gsx1300rs.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! http://www.bikeeffects.com/proddetail.asp?prod=113-1204-1000 http://www.bikeeffects.com/proddetail.asp?prod=113-1204-1000 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1284 http://www.bikeeffects.com/proddetail.asp?prod=113-1284 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1204-600 http://www.bikeeffects.com/proddetail.asp?prod=113-1204-600 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1246 http://www.bikeeffects.com/proddetail.asp?prod=113-1246 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1204-750 http://www.bikeeffects.com/proddetail.asp?prod=113-1204-750 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1254 http://www.bikeeffects.com/proddetail.asp?prod=113-1254 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-12069 http://www.bikeeffects.com/proddetail.asp?prod=113-12069 http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1209 http://www.bikeeffects.com/proddetail.asp?prod=113-1209 http://www.bikeeffects.com/prodimages/coxguard3s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1414 http://www.bikeeffects.com/proddetail.asp?prod=113-1414 http://www.bikeeffects.com/prodimages/coxguard3-2s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1404 http://www.bikeeffects.com/proddetail.asp?prod=113-1404 http://www.bikeeffects.com/prodimages/coxguard3-2s.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-13034 http://www.bikeeffects.com/proddetail.asp?prod=113-13034 http://www.bikeeffects.com/prodimages/small/113-13034-1.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-13064 http://www.bikeeffects.com/proddetail.asp?prod=113-13064 http://www.bikeeffects.com/prodimages Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! Note: This is a replacement for the stock plastic OEM radiator guard. This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1315 http://www.bikeeffects.com/proddetail.asp?prod=113-1315 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! http://www.bikeeffects.com/proddetail.asp?prod=113-15154 http://www.bikeeffects.com/proddetail.asp?prod=113-15154 http://www.bikeeffects.com/prodimages/small/113-15154-1.jpg Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1354 http://www.bikeeffects.com/proddetail.asp?prod=113-1354 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This guard comes in black only. This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-1344 http://www.bikeeffects.com/proddetail.asp?prod=113-1344 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-13348 http://www.bikeeffects.com/proddetail.asp?prod=113-13348 Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! http://www.bikeeffects.com/proddetail.asp?prod=113-1309 http://www.bikeeffects.com/proddetail.asp?prod=113-1309 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! http://www.bikeeffects.com/proddetail.asp?prod=113-13029 http://www.bikeeffects.com/proddetail.asp?prod=113-13029 http://www.bikeeffects.com/prodimages/small/113-13029-1.jpg Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-13004 http://www.bikeeffects.com/proddetail.asp?prod=113-13004 http://www.bikeeffects.com/prodimages/small/113-13004-1.jpg Cox Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-13294 http://www.bikeeffects.com/proddetail.asp?prod=113-13294 http://www.bikeeffects.com/prodimages/coxguardss.jpg Cox Radiator Guards are engineered so they are manufactured withoutwelding. Frames are cut from a sheet of .060 5051 aluminum. The screenis .034 expanded aluminum. the screen and frame are then hard anodized for a chip-free, tough finish! http://www.bikeeffects.com/proddetail.asp?prod=113-1450RGA http://www.bikeeffects.com/proddetail.asp?prod=113-1450RGA http://www.bikeeffects.com/prodimages/coxguardaprilias.jpg Cox Radiator and Oil Cooler Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! This product will not be shipped to addresses outside of theUSA. http://www.bikeeffects.com/proddetail.asp?prod=113-16014 http://www.bikeeffects.com/proddetail.asp?prod=113-16014 http://www.bikeeffects.com/prodimages/small/113-16014-1.jpg This 3 piece set is ready to install on your 2004-2009 or 2006-2010ApriliaRSV1000 Mille R or Tuono. Installation kit included. Choose from 6colors. http://www.bikeeffects.com/proddetail.asp?prod=113-1409 http://www.bikeeffects.com/proddetail.asp?prod=113-1409 http://www.bikeeffects.com/prodimages/coxguard3-2s.jpg Cox Radiator and Oil Cooler Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. the screen and frame are then hard anodizedfor a chip-free, tough finish! http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA9 http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA9 http://www.bikeeffects.com/prodimages/ram-hol-ga9s.jpg All cables and the Garmin cradle can stay connected to the unit while in the RAMcradle. The cradle includes a set of two nuts and bolts to connect the cradle toany of the RAM compatible mounts, such as The TechMount Top Plate or Accessory Plate. http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA21 http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA21 http://www.bikeeffects.com/prodimages/ram-hol-ga21s.jpg Ram Cradle for Garmin nϋvi® 300 series. Used to attach a nϋvi® to a TechMount Top Plate or Accessory Plate. http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA23U http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA23U http://www.bikeeffects.com/prodimages/no_pict_ens.jpg Ram Cradle for Garmin nϋvi® 600 Series GPS Units. Requires a TechMount 60003 Quick Change Adapter for alignment purposes when used with the TechMountTop Plates. http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA25U http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA25U RAM cradle to adapt the Garmin nuvi® 200 Series to the TechMounts top plate. Also requires 60003 Quick Change Adapter. http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA26U http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA26U Ram Cradle for Garmin nuvi® 7## Series. Requires Quick Change Adapter. http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA20 http://www.bikeeffects.com/proddetail.asp?prod=RAM-HOL-GA20 http://www.bikeeffects.com/p