Blue Sea Systems 6 circuit Blade Fuse Block with Negative Bus

• Clear insulating cover with label recesses
• Cover Satisfies ABYC/USCG requirements for insulation
• Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
• Accepts ATO and ATC fast acting blade fuses
• 20 write-on circuit labels included
• Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
• Accepts ATO and ATC fast acting blade fuses

The AP-1's compact size (3.0" X 2.4") allows for easy installation. Once mounted, a positive and negative wire is run to the Power Panel which will then supply convenient, safe fused power for up to eight electronic devices.

• Capacity up to 60 Amps
• Plated contacts, stainless steel hardware
• ATC Type Fuses (included)
• Lugless connector clamps
• Instructions and hardware included
• Optional AP-170R Relay & Wiring Kit available
• One year warranty

The AP-2 Power Panel provides both constant and switched power sources. Devices such as GPS and radio memory which need to be "kept alive", even when the bike is off have their own "constant power" fuses with three outputs fed by two fuses. These outputs can supply approximately 20 Amps but are normally fused at minimum to protect the small wires which feed these devices.

Switched, high powered devices are fed power through the additional fuses with five outputs. These fuses can be controlled by an optional AP-130R Relay and Wiring Kit. 

• Capacity up to 50 Amps (20 constant, 30 fused)
  
• Plated contacts, stainless steel hardware
• ATC Type Fuses (included)
• Lugless connector clamps
• Instructions and hardware included
• Optional AP-130R Relay & Wiring Kit available
• One year warranty